 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Part Number: www.SunLED.com EMG28D 10mmx22mm LIGHT BAR PRELIMINARY SPEC Features UNIFORM LIGHT EMITTING AREA. EASILY MOUNTED ON P.C. BOARDS OR INDUSTRY STANDARD SOCKETS. FLUSH MOUNTABLE. EXCELLENT ON/OFF CONTRAST. CAN BE USED WITH PANELS AND LEGEND MOUNTS. MECHANICALLY RUGGED. I.C. COMPATIBLE. BOTTOM SURFACE OF EPOXY IS NOT FLAT. RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25C) Reverse Voltage Forward Current Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width Power Dissipation Operating Temperature Storage Temperature Lead Solder Temperature [2mm Below Package Base] Lead Solder Temperature [5mm Below Package Base] VR IF iFS PT TA Tstg MG (GaP) 5 25 140 62.5 -40 ~ +85 -40 ~ +85 260C For 3 Seconds Unit V mA mA mW C Operating Characteristics (TA=25C) Forward Voltage (Typ.) (IF=20mA) Forward Voltage (Max.) (IF=20mA) Reverse Current (Max.) (VR=5V) Wavelength Of Peak Emission (Typ.) (IF=20mA) Wavelength Of Dominant Emission (Typ.) (IF=20mA) Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Capacitance (Typ.) (VF=0V, f=1MHz) VF VF IR MG (GaP) 2.2 2.5 10 Unit V V uA P 565 nm D 568 nm 30 nm 260C For 5 Seconds C 15 pF Part Number Emitting Color Emitting Material Lens-color Luminous Intensity (IF=20mA) mcd min. typ. 19 Wavelength nm P Viewing Angle 2 1/2 EMG28D Green GaP Green Diffused 4 565 120 Published Date : MAR.20,.2008 Drawing No : SDSA3903 V4 Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com EMG28D 10mmx22mm LIGHT BAR MG Published Date : MAR.20,.2008 Drawing No : SDSA3903 V4 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com EMG28D 10mmx22mm LIGHT BAR Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR.20,.2008 Drawing No : SDSA3903 V4 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com EMG28D 10mmx22mm LIGHT BAR PACKING & LABEL SPECIFICATIONS EMG28D Published Date : MAR.20,.2008 Drawing No : SDSA3903 V4 Checked : B.L.LIU P.4/4 |
Price & Availability of EMG28D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |