View NLP65MEDICAL_4295425.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Embedded Power for Business-Critical Continuity
NLP65 Medical Series
Single, dual and triple output
Total Power: 65W Input Voltage: 85 - 264 VAC # of Outputs: Single, dual, triple
Rev.02.28.07 NLP65_3300 1 of 4
Special Features
* 85 VAC to 264 VAC universal input range * Harmonic current correction as standard * Maximum component height 1.26 inches * UL, CSA and VDE safety approvals * Overvoltage and short circuit protection * 5 x 3 x 1.26 inch (127.0 x 76.2 x 32mm) footprint * Available RoHS compliant * 2 year warranty
The NLP65 Medical series is a 65 W universal input ac-dc power supply with input harmonic current correction as standard. This compact design, packed in a 5 x x3 inch card with a maximum component height of 1.26 inches, is ideal for use in a variety of medical, laboratory and dental applications such as centrifuges, incubators and infusion pumps. The NLP65 Medical series comprises of eight models in single, dual and triple output configurations. Providing 65 Watts of continuous output power with free air convection, the NLP65 Medical series will deliver 75 Watts output power with 20 CFM of air. The series, with full medical safety approval to EN60601 and UL2601, is CE marked, greatly accelerating design-in time and reducing system compliance costs.
Safety
VDE0705/EN60601-1/IEC1010 File No. 10401-3336-0156/32480 Licence No. 121949 UL1950 File No. E147937 CSA C22.2 No. 950 File No. LR41062C
Embedded Power for Business-Critical Continuity
Specifications
All specifications are typical at nominal input, full load at 25C unless otherwise stated
Rev.02.28.07 NLP65_3300 2 of 4
OUTPUT SPECIFICATIONS Output power Total regulation Rise time Transient response At turn-on Main output 25% step at 0.1 A/s Natural convection 65 W max. See table 1.0 s, max. 5.0% max. dev., 1ms recovery to 1.0% 0.02%/C Main outputs Cyclic operation 125%, 10% Yes
EMC CHARACTERISTICS Conducted emissions Radiated emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity GENERAL SPECIFICATIONS Hold-up time Efficiency Isolation voltage Universal input 85-264 Vac 47-63 Hz 120 Vac 230 Vac 264 Vac, 60 Hz 120 Vac 230 Vac 17 A max. 32 A max. 95 A 1.05 A rms 0.51 A rms 250 Vac F 3.15 A Switching frequency Approvals and standards Weight MTBF MIL-HDBK-217F 120 Vac, 60 Hz 120 Vac, 65 W Input/output Input/chassis Fixed 16 ms @ 65 W 72% typ. 4000 Vac 1500 Vac 100 kHz, 5 kHz EN60601, UL2601 CSA 22.2 No. 125 283 g (10 oz) 150,000 hours EN55022, FCC part 15 EN55022, FCC part 15 EN61000-4-2, level 3 EN61000-4-2, level 4 EN61000-4-5, level 3 EN61000-4-4, level 3 EN61000-4-3, level 3 EN61000-4-6, level 3 Level A Level A Perf. criteria 1 Perf. criteria 1 Perf. criteria 1 Perf. criteria 1 Perf. criteria 2 Perf. criteria 2
Temperature coefficient Overvoltage protection Short circuit protection INPUT SPECIFICATIONS Input voltage range (See Note 2) Input frequency range Input surge current (cold start) Safety ground leakage current Input current Input fuse
ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient, (See derating curve) Non-operating 0 C to 50 C ambient, convection cooled 50 C to 70 C ambient, convection cooled Non-condensing Operating Non-operating 5-500 Hz per MIL-STD-810E 0 C to +70 C -40 C to +85 C 65 W Derate to 50% load 5% to 95% RH 10,000 feet max. 30,000 feet max. 2.43 G rms approx. 516.4 Part IV
Relative humidity Altitude Vibration (See Note 5) Shock
Embedded Power for Business-Critical Continuity
Specifications Contd.
Rev.02.28.07 NLP65_3300 3 of 4
OUTPUT VOLTAGE +5 V +12 V -12 V +5 V +15 V -15 V +5 V +24 V +5 V +12 V +5 V +12 V +15 V +24 V Notes
1
OUTPUT CURRENT MAX (1) 7A 2.5 A 0.5 A 7A 2.2 A 0.65 A 7A 2A 7A 2.5 A 10 A 5.4 A 4.4 A 2.7 A PEAK 9.1 A 3.3 A 0.81 A 9.1 A 2.9 A 0.85 A 9.1 A 2.6 A 9.1 A 3.3 A 13 A 7A 5.7 A 3.5 A FAN (10) 8A 3A 1A 8A 2.5 A 0.8 A 8A 2A 8A 3A 12 A 6.5 A 5.3 A 3.5 A
RIPPLE (4) 50 mV 150 mV 120 mV 50 mV 150 mV 150 mV 50 mV 240 mV 50 mV 150 mV 50 mV 120 mV 150 mV 240 mV
TOTAL REGULATION (6) 2.0% 5.0% 5.0% 2.0% 5.0% 5.0% 2.0% 5.0% 2.0% 5.0% 2.0% 2.0% 2.0% 2.0%
MODEL NUMBER (11,12) NLP65-9908J
NLP65-9910J
NLP65-9920J
NLP65-9929J
NLP65-9905J NLP65-9912J NLP65-9915J NLP65-9924J
2 3 4
5 6
Natural convection cooling. Models NLP65-9929J, NLP65-9908J, NLP65-9910J must not exceed 62.5 Watts continuous output power with natural convection. Model NLP65-9920J not to exceed 65 Watts continuous output power with natural convection. When the input voltage is less than 90 Vac the operating temperature range is 0 C to +40 C. The ripple and regulation specifications may not be met. Peak output current lasting less than 60 seconds with duty cycle less than 5%. During peak loading, output voltage may exceed total regulation limits. Figure is peak-to-peak for convection power rating. Output noise measurements are made across a 20MHz bandwidth using a 6 inch twisted pair, terminated with a 10 F electrolytic capacitor and a 0.1 F ceramic capacitor. Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5 Hz to 500 Hz. To maintain stated regulation then: for single output units I 0.2 A I max. for multiple output units 0.25 I(A)/I(B) 5, for I(A) 0.2 A I(A) max.
For optimum reliability, no part of the heatsink should exceed 120 C, and no semiconductor case temperature should exceed 130 C. 8 CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. 9 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 10 Maximum continuous output power for all multiple output models must not exceed 75 Watts with 20 CFM forced air cooling at 50 C. 11 The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 12 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. 7
Embedded Power for Business-Critical Continuity
Rev.02.28.07 NLP65_3300 4 of 4
Americas
5.00 (127.00) 4.550 (115.57) 0.225 (5.715)
5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698
J1 3N 1L 3.00 (76.20) J2 C19 T1
J3 1
Europe (UK)
Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355
6
2.550 (64.770)
Asia (HK)
16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888
Mounting Hole Diameter 0.156 (4.00)
ALL DIMENSIONS IN INCHES (mm)
MAXIMUM COMPONENT HEIGHT 1.26 (32.00) TOLERANCE: .xxx 0.005" .xx 0.02"
For global contact, visit:
www.powerconversion.com technicalsupport@powerconversion.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. (c)2007 Emerson Electric Co.

▲Up To Search▲

Price & Availability of NLP65MEDICAL

	To Download NLP65MEDICAL Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .