Part Number Hot Search : 
ED20G BA98010 C6VDC W1A27 E100A 3SPC230F R2100 00GA1
Product Description
Full Text Search
 

To Download WMO3S-1K5JA05 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Flameproof Metal Oxide Resistors
WMO-S Series
Cost effective Small size for power rating Good pulse handling capability Flameproof protection
Electrical Data
WMO1/2S Power rating @70C Resistance range Limiting element voltage TCR (25 to 75C) Isolation Voltage Resistance tolerance Standard Values Thermal Impedance C/watt C 125 105 Ambient temperature range watts ohms volts ppm/C volts % 250 5 E24 75 -55 to +155 63 42 250 300 350 350 500 1/2 WMO1S 1 WMO2S 2 10R 100K 350 500 WMO3S 3 WMO5S 5
Physical Data
Dimensions (mm) and Weight (g) Type WMO1/2S WMO1S WMO2S WMO3S WMO5S L max. 7.5 10 12 16 26 D max. 3 4.5 5 5.5 8.5
D
f min. 22 21 20 25 29
d nom. 0.6 0.7 0.7 0.8 0.8
PCB mounting centres
Min. bend radius 0.6 1.05 1.05 1.2 1.2
Wt. nom. 0.22 0.42 0.63 1.0 3.7
12.7 15.2 17.8 20.3 30.5
d
L
f
General Note
Welwyn Components reserves the right to make changes in product specification without notice or liability. All information is subject to Welwyns own data and is considered accurate at time of going to print.
(c) Welwyn Components Limited Bedlington Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 Facsimile: +44 (0) 1670 829465 Email: info@welwyn-tt.com Website: www.welwyn-tt.com
A subsidiary of TT electronics plc Issue B . 03.07
WMO-S Series
Construction
The resistive film is deposited onto a high purity ceramic rod. End caps are force fitted and termination wires are welded to the end caps. The element is adjusted to the required resistance value by a helical cut. Finally a cement protection is applied to the resistor body prior to marking with indelible ink.
Marking
WMO-S resistors are colour coded with four bands indicating value and tolerance in accordance with IEC62.
Solvent Resistance
The body protection and marking are resistant to all normal industrial cleaning solvents suitable for printed circuits.
Flammability
The resistor coating will not burn under any condition of applied temperature or component overload.
Performance Data
Maximum Load at Rated Power: 1000hrs @ 70C Short term (5s) overload Derating Temperature cycling Moisture resistance Resistance to solder heat Insulation resistance
DR% DR% DR% DR% DR%
GW
5 2 + 0.05W See derating curve 2 + 0.05W 5 1 >10
WMO-S Series Derating Curve
100
% of Rated Power at 70 C
45
0
70
155
235
Ambient temperature (C)
(c) Welwyn Components Limited Bedlington Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 Facsimile: +44 (0) 1670 829465 Email: info@welwyn-tt.com Website: www.welwyn-tt.com
Issue B . 03.07
WMO-S Series
Application Notes
1. If the resistors are to dissipate full rated power, it is recommended that the terminations should not be soldered closer than 4mm from the body. 2. Due to operating temperature limits imposed by some PCB materials, derating may be necessary. An estimate of the temperature rise to be expected can be calculated using the thermal impedance figures given under Electrical Data. 3. WMO-S resistors can also be supplied with radial, goalpost or lancet pre-formed leads. Consult Factory for details.
Radial Goalpost Lanset
Packaging
Our standard packaging for WMO-S is taped and boxed. The critical dimensions are shown in Figure 1. The component wires will not protrude beyond the outside edge of the tapes. Pre-formed resistors are supplied loose packed in plastic bags or boxes.
Dimensions mm WMO1/2S WMO1S WMO2S WMO3S WMO5S
A B
52 5
52 5
Figure 1
52 5
67 10
85 10
B
6
f1
A
f2
6
Body location f1-f2 < 1.4mm
Ordering Procedure
Specify type reference, value and tolerance as shown in this example of WMO3S at 1.5KW, 5%:
T ype Value (use IE C62 code) T olerance (use IE C 62 code) J 5% P acking Code W MO 3 S 1 K 5 J A 1
A5 A1 A05
Ammo Pack
WMO1 2 S WMO1S, WMO2S, WMO3S WMO5S
5000 / Box 1000 / Box 500 / Box
(c) Welwyn Components Limited Bedlington Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 Facsimile: +44 (0) 1670 829465 Email: info@welwyn-tt.com Website: www.welwyn-tt.com
Issue B . 03.07


▲Up To Search▲   

 
Price & Availability of WMO3S-1K5JA05

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X