View EMC1133_4236396.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

EMC1133 SST Compliant Hardware Monitor with Three Temperature Channels and Three Voltage Channels
PRODUCT FEATURES
General Description
The EMC1133 is a one-wire sensor that is capable of monitoring up to three voltages and three temperature zones for an Intel PC platform containing an SST host. The three temperature zones consist of an internal temperature diode and two externally connected temperature diodes. In cooperation with a host device, thermal management and fan control can be performed. Communication takes place over a one-wire SST based interface. The internal 11-bit delta-sigma ADC architecture provides superb linearity, high accuracy, and excellent noise immunity. Resistance Error Correction Ideality Configuration Beta Compensation Two External Temperature Monitors
-- -- -- -- 0.125C resolution 1C Accuracy (50C to 70C) Diode Fault Reporting Second External Diode configured to read a discrete diode.
Data Brief
Internal Temperature Monitor
-- Range -40C to +125C -- 0.125C resolution -- 2C Accuracy (40C to 70C)
Applications
Desktop PCs, Servers and Workstations
Voltage Monitor:
-- 3.3V, 2.5V, VCCP inputs -- 2% Total Unadjusted Error -- 11-bit resolution
Features
Single Wire Interface (SST based)
-- -- -- -- SST 1.0 compliant Fixed Address, Discoverable Device Three programmable addresses Supports FCS Abort functionality not available in SST 0.9 compliant devices
Supply
-- 3.0V to 3.6V
Simplified Block Diagram
Switching Current DP1 DN1 DP2 DN2 Internal Temp Diode Attenuator bank 3.3V 2.5V VCCP Analog Mux and Anti-Alias Filter External Temp Registers
EMC1133
Configuration Register SST One-Wire Interface ADD
11-bit delta-sigma ADC
Internal Temp Register
Digital Mux and Byte Interlock
Voltage Registers
SST Status Register
SMSC EMC1133
PRODUCT PREVIEW
Revision 2.58 (08-01-07)
SST Compliant Hardware Monitor with Three Temperature Channels and Three Voltage Channels
ORDER NUMBER:
PART NUMBER
EMC1133-AIZL-TR
FEATURES
External Diode 1 configured to monitor 65nm CPU External diode 2 configured to monitor 2N3904
PACKAGE
10 pin MSOP Lead-Free, ROHS Compliant
80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright (c) 2007 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation ("SMSC"). Product names and company names are the trademarks of their respective holders. SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Revision 2.58 (08-01-07)
2
SMSC EMC1133
PRODUCT PREVIEW
Package Outline
Revision 2.58 (08-01-07) 3 PRODUCT PREVIEW SMSC EMC1133
SST Compliant Hardware Monitor with Three Temperature Channels and Three Voltage Channels
REVISIO N HISTORY
R E VISION D ESC R IPTION IN ITIA L RELEASE D ATE 3/29/05 R ELE AS ED BY S.K .ILIEV
3
5
D e
A
PIN 1 IDENTIFIER AREA (D/2 X E1/2)
c
4
3
E1
E
4
2
10X b
SEE DETAIL "A"
TOP VIEW
END VIEW
A2 C A
SEATING PLANE
A1
ccc C
NO TES: 1. ALL DIM ENSIONS ARE IN MILLIM ETER. 2. TOLERANCE ON THE TRUE POSITION OF EACH LEAD IS 0.04 m m AT M AXIMUM MATERIAL CONDITION. 3. PA CKAGE BODY DIM ENSIONS "D" AND "E1" DO NOT INCLUDE MOLD/INTERLEAD PROTRUSIONS OR FLASH. M AX IM UM M OLD PROTRUSIONS OR FLASH IS 0.15 m m (0.006 INCHES) PER END AND SIDE. DIM ENSIONS "D" AND "E1" ARE DE TERMINED AT THE OUTERMOS T EXTREMES OF THE PLASTIC B ODY, INCLUDING ANY MISMATCH BETWEEN TOP AND BOTTOM PLASTIC B ODY. THEY ARE DE TERMINED AT DATUM PLA NE "H". 4. DIMENSIONS "b" A ND "c" APPLY TO THE FLAT SECTION OF THE LEAD BETWEEN 0.08 mm AND 0.15 m m FROM THE LEAD TIP. 5. DETAILS OF THE PIN 1 IDENTIFIER ARE OPTIONAL, BUT MUST BE LOCATED W ITHIN THE ZONE INDICA TED.
SIDE VIEW
3-D VIEW
H C 0.25
SEATING PLANE GAU GE PLANE
0 - 8
L (0.95)
U N LES S O TH ER W ISE SPECIFIED D IM EN S IO NS A RE IN MILLIMETERS AN D TO LERANCES ARE: D EC IMAL X.X 0.1 X.XX 0.05 X.X XX 0.025 A N G U LAR 1
THIRD A NGLE P ROJE CT ION
80 A R KAY DRIVE H AU P PAU G E, N Y 11788 U SA
TITLE
DETAIL "A"
D IM AN D TO L P ER A SM E Y14.5M - 1994
M A TE RIAL
NAME
DRAWN
DATE
-
S.K.ILIEV
C HECKED
3/29/05 3/29/05
SCALE
PACKAGE O UTLINE 10 PIN TSSO P, 3x3 MM BODY, 0.50 M M PITCH
D WG NUM BER REV
F IN ISH
S.K.ILIEV
A PPR OVED
MO-10-TSSOP-3x3
S TD C OM PLIANCE SHEET
A 1 OF 1
P RIN T W ITH "S C ALE TO FIT" D O N O T S C ALE DRAW ING
S.K.ILIEV
3/29/05
1:1
JEDEC: MO -187
Figure 1 EMC1133 10-Pin MSOP Package Drawing

▲Up To Search▲

Price & Availability of EMC1133

	To Download EMC1133 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .