|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DG2737, DG2738, DG2739 Vishay Siliconix 6-, Low Voltage, Dual SPST Analog Switch DESCRIPTION The DG2737, DG2738 and DG2739 are high performance, low on-resistance analog switches of dual SPST configuration. Built on Vishay Siliconix's sub-micro CMOS technology, the DG2737, DG2738, DG2739 achieve switch on-resistance of 6 at 3 V V+. Its - 3 dB bandwidth is typically 720 MHz. It can switch signals with amplitudes of up to VCC to be transmitted in either direction. Combining low power, high speed, low on-resistance and small physical size, the DG2737, DG2738, DG2739 are ideal for portable and battery powered applications requiring high performance and efficient use of board space. The DG2737, DG2738, DG2739 come in a small miniQFN-8 lead package (1.4 x 1.4 x 0.55 mm). As a committed partner to the community and the environment, Vishay Siliconix manufactures this product with the lead (Pb)-free device terminations and is 100 % RoHS compliant. FEATURES * * * * * * * Voltage range: 2.3 V to 4.3 V Low on-resistance: 6 typ. at 3 V - 48 dB crosstalk at 240 MHz RoHS COMPLIANT Low power consumption Ultra small miniQFN8 package of 1.4 x 1.4 x 0.55 mm > 300 mA latch up current per JESD78 Switch exceeds 5 kV ESD/HBM FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION DG2737 miniQFN-8L V+ 8 VIN S1 D1 1 2 3 48 GND Top View 7 6 5 NC S2 D2 VIN1 S1 D1 1 2 3 DG2738 miniQFN-8L V+ 88 7 6 5 48 GND Top View VIN2 S2 D2 VIN1 S1 D1 1 2 3 DG2739 miniQFN-8L V+ 88 7 6 5 3 48 GND Top View VIN2 S2 D2 Ax Pin 1 Device Marking: Ax for DG2737 x = Date/Lot Traceability Code Pin 1 Bx Pin 1 Cx Device Marking: Bx for DG2738 x = Date/Lot Traceability Code Device Marking: Cx for DG2739 x = Date/Lot Traceability Code Document Number: 68801 S-82643-Rev. B, 03-Nov-08 www.vishay.com 1 DG2737, DG2738, DG2739 Vishay Siliconix TRUTH TABLE 1 Input Logic Low High DG2737 S1 and D1 ON OFF S2 and D2 ON OFF VIN TRUTH TABLE 2 Input Logic Low High Low High DG2738 S1 and D1 ON OFF X X S2 and D2 X X ON OFF S1 and D1 ON OFF X X DG2739 S2 and D2 X X OFF ON VIN1 VIN2 ORDERING INFORMATION Temp. Range - 40 C to 85C Package miniQFN-8L Part Number DG2737DN-T1-E4 DG2738DN-T1-E4 DG2739DN-T1-E4 ABSOLUTE MAXIMUM RATINGS TA = 25 C, unless otherwise noted Parameter Reference to GND V+ VIN, D, Sa Limit - 0.3 to 5.0 - 0.3 to (V+ + 0.3) 30 300 500 - 65 to 150 190 Unit V Current (Any terminal except D or S) mA Continuous Current (D or S) Peak Current (Pulsed at 1 ms, 10 % Duty Cycle) Storage Temperature (D Suffix) C Power Dissipation (Packages)b miniQFN-8Lc mW Notes: a. Signals on VIN, D, or S exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 2.4 mW/C above 70 C. SPECIFICATIONS V+ = 3 V Test Conditions Unless Otherwise Specified V+ = 3 V, VIN = 0.4 V or 1.4 Ve RON V+ = 3 V, IS = 8 mA, VD = 0.4 V V+ = 3 V, IS = 8 mA, VD = 0.4 V V+ = 3 V, IS = 8 mA, VD = 0 V, 1 V Limits - 40 C to 85 C Temp.a Full Room Full Room Room 0.1 2.6 Min.b 0 6 Typ.c Max.b V+ 8 9 0.5 4 Unit V Parameter Analog Switch Analog Signal Ranged On-Resistance RON Matchd RON Flatnessd Symbol Vanalog RON RON RON Flatness www.vishay.com 2 Document Number: 68801 S-82643-Rev. B, 03-Nov-08 DG2737, DG2738, DG2739 Vishay Siliconix SPECIFICATIONS V+ = 3 V Test Conditions Unless Otherwise Specified V+ = 3 V, VIN = 0.4 V or 1.4 Ve Limits - 40 C to 85 C Temp.a Room V+ = 4.3 V, VS = 0.3 V/3.3 V, VD = 3.3 V/0.3 V Full Room Full V+ = 4.3 V, VS = VD = 4 V/0.3 V Room Full Full Full Full Room V+ = 2.3 V to 3.6 V, VNO or VS = 1.5 V, RL = 50 , CL = 35 pF Full Room Full V+ = 2.3 V to 4.3 V CL = 1 nF, RGEN = 0 , VGEN = 0 V RL = 50 , CL = 5 pF, f = 1 MHz Off-Isolationd OIRR RL = 50 , CL = 5 pF, f = 10 MHz RL = 50 , CL = 5 pF, f = 240 MHz RL = 50 , CL = 5 pF, f = 1 MHz Crosstalkd 3 dB bandwidthd Channel to Channel skewd Skew of Opposite Transitions of the Same Outputd Total Jitterd Source Off Capacitanced Drain Off Capacitanced Drain On Capacitanced Control Pin Capacitanced Power Supply Power Supply Range Power Supply Current V+ I+ VIN = 0 or V+ Full 2.3 4.3 1.0 V A CS(off) CD(off) CD(on) CIN f = 1 MHz, VS = 0 V f = 1 MHz, VD = 0 V f = 1 MHz, VD = VS = 0 V f = 1 MHz Room Room Room Room RL = 50 , CL = 5 pF Room XTALK RL = 50 , CL = 5 pF, f = 10 MHz RL = 50 , CL = 5 pF, f = 240 MHz RL = 50 , CL = 5 pF Room Room Room Full Room 1 10.4 - 79 - 59 - 28 - 109 - 99 - 48 720 25 20 200 4.4 3.8 10 8.3 pF ps MHz dB 6 13 -1 23 Min.b - 10 - 100 - 10 - 100 - 10 - 100 1.3 0.5 1 60 70 50 60 ns pC ns Typ.c Max.b 10 100 10 100 10 100 nA Unit Parameter Analog Switch Switch Off Leakage Current Symbol IS(off) ID(off) ID(on) Channel-On Leakage Current Digital Control Input High Voltage Input Low Voltage Input Current Dynamic Characteristics Turn-On Timee Turn-Off Timee Break-Before-Make Time Charge Injectiond VINH VINL IINL or IINH V+ = 2.3 V to 4.3 V VIN = 0 or V+ V A tON tOFF tBBM Q Notes: a. Room = 25 C, Full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, not subjected to production test. e. VIN = input voltage to perform proper function. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Document Number: 68801 S-82643-Rev. B, 03-Nov-08 www.vishay.com 3 DG2737, DG2738, DG2739 Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 35 V+ = 2.3V 2.3 V 30 R ON - On-Resistance () 25 V+ = 2.7V 2.7 V 20 15 10 5 0 0 1 2 3 4 5 VD - Analog Voltage (V) V+ == 3 V V+ 3 V V+ = 3.6 V R ON - On-Resistance () V+ = 2.5 V 14 12 10 8 - 40 C 6 4 2 V+ = 3.0 V 0 0 0.5 1 1.5 2 2.5 3 VD - Analog Voltage (V) + 25 C 18 16 + 85 C V+ = 4.3 V RON vs. VD and Supply Voltage 80 V+ = 4.3 V 75 70 Leakage Current (pA) 65 60 55 50 45 40 - 60 150 100 50 0 - 50 - 100 - 150 - 200 - 40 - 20 0 20 40 60 80 100 0 200 RON vs. VD and Temperature V+ = + 4.3 V I D(OFF) I D(ON) I+ - Supply Current (nA) I S(OFF) 1 2 3 4 5 Temperature (C) VD , VS - Analog Voltage (V) Supply Current vs. Temperature 10 000 V + = + 4.3 V 14 ID(OFF) Q - Charge Injection (pC) 1000 Leakage Current (pA) ID(ON) 100 12 10 8 16 Leakage vs. Analog Voltage V+ = + 4.3 V V+ = + 3.6 V 6 V+ = + 3 V 4 2 0 V+ = + 2.3 V V+ = + 2.7 V C L =1 nF Drain 10 IS(OFF) 1 - 60 - 40 - 20 0 20 40 60 80 100 0 1 2 3 4 5 Temperature (C) VD - Analog Voltage (V) Leakage Current vs. Temperature Charge Injection vs. Analog Voltage www.vishay.com 4 Document Number: 68801 S-82643-Rev. B, 03-Nov-08 DG2737, DG2738, DG2739 Vishay Siliconix TYPICAL CHARACTERISTICS 25 C, unless otherwise noted 35 30 tON, tOFF - Switching Time (ns) 25 20 15 10 5 0 - 60 V+ = 3.6 V tOFF V+ = 2.7 V tOFF V+ = 3.6 V tON V+ = 2.7 V tON VT - Switching Threshold (V) 1.3 1.2 - 40 C to 85 C 1.1 1.0 0.9 0.8 0.7 0.6 0.5 2.0 - 40 - 20 0 20 40 60 80 100 2.5 3.0 3.5 4.0 4.5 Temperature (C) V+ - Supply Voltage (V) Switching Time vs. Temperature 0 0 - 10 -1 - 20 - 30 Insertion Loss (dB) OIRR, XTALK (dB) -2 - 40 - 50 - 60 - 70 - 80 - 90 - 100 -5 Switching Threshold vs. Supply Voltage OIRR -3 XTALK -4 V+ = 3 V R L = 50 - 110 - 120 1G - 130 100K 1M 10M Frequency (Hz) V+ = 3 V RL = 50 -6 100K 1M 10M Frequency (Hz) 100M 100M 1G Insertion Loss vs. Frequency Off-Isolation, Crosstalk vs. Frequency Document Number: 68801 S-82643-Rev. B, 03-Nov-08 www.vishay.com 5 DG2737, DG2738, DG2739 Vishay Siliconix TEST CIRCUITS V+ Logic Input V+ Switch Input Logic Input S VIN GND 0V CL (includes fixture and stray capacitance) VOUT = VD Logic "1" = Switch On Logic input waveforms inverted for switches that have the opposite logic sense. RL 50 CL 35 pF D Switch Output VOUT 0.9 x V OUT Switch Output 0V tON tOFF VINH 50 % VINL tr < 5 ns tf < 5 ns (R L RL +R ON ) Figure 1. Switching Time V+ Logic Input VS2 VS1 S2 VIN2 S1 VIN1 GND D1 VO1 Switch Output RL2 50 RL1 50 CL1 35 pF CL2 35 pF Switch Output 0V VS1 VO1 0V V+ D2 VINH 50 % VINL VS2 VO2 VO2 90 % 90 % tD tD CL (includes fixture and stray capacitance) Figure 2. Break-Before-Make (DG2739) VO V+ VO VINX OFF VO CL 1 nF VINX OFF ON Q = VO x CL OFF ON OFF Rg V+ S VIN GND D Vg VIN = 0 - V+ Figure 3. Charge Injection www.vishay.com 6 Document Number: 68801 S-82643-Rev. B, 03-Nov-08 DG2737, DG2738, DG2739 Vishay Siliconix TEST CIRCUITS V+ V+ S VIN D RL 0 V, V+ GND Analyzer VD Off Isolation = 20 log V S Figure 4. Off-Isolation V+ C V+ D1 50 VS Rg = 50 0 V, V+ S VIN1 S2 D2 RL VO 0 V, V+ VIN2 GND XTALK Isolation = 20 log C = RF bypass VO VS Figure 5. Crosstalk V+ V+ D Meter IN 0 V, V+ S GND HP4192A Impedance Analyzer or Equivalent f = 1 MHz Figure 6. Channel Off/On Capacitance Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?68801. Document Number: 68801 S-82643-Rev. B, 03-Nov-08 www.vishay.com 7 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of DG2737DN-T1-E4 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |