 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Preliminary Technical Datasheet DS40 power light source LUXEON V Portable (R) Introduction LUXEON is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. The LUXEON V Portable, part of the LUXEON V family, delivers white luminous output 100 times brighter than standard small signal LEDs and 4X that of a standard LUXEON. LUXEON V Portable is designed for portable lighting products such as flashlights, "miner" head mounted lights, emergency egress lighting, and other battery operated applications. This device offers ruggedness, low power consumptions, and lifetimes greater than 50X conventional flashlight sources--over 500 hours compared to the typical 20 hour life for an incandescent bulb. (R) Features Highest Flux LED in the world --50X traditional "5mm" LEDs, and 4X a standard LUXEON. 500+ hours operation compared to just 20 hours for typical incandescent flashlight bulbs. Extreme Luminous Density--20X the lm/mm2 of a standard through hole LED More Energy Efficient than Incandescent and most Halogen lamps Low voltage DC operated Cool beam, safe to the touch Instant light (less than 100 ns) Fully dimmable No UV Superior ESD protection Uniform angular color uniformity superior to other solid state sources, eliminating color halos within the light beam Benefits Compact low voltage light source for portable lighting applications Highly efficient source results in longer battery life Solid state technology eliminates fragile filament resulting in extremely rugged designs Much longer life than conven tional light bulbs enables sealed for life designs Table of Contents Mechanical Dimensions -- Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Mechanical Dimensions -- Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Part Number Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Flux Characteristics at 700mA, Junction Temperature, TJ = 25C . . . . . . . . . . . . . . . . . . . . .4 Electrical Characteristics at 700mA, Junction Temperature, TJ = 25C . . . . . . . . . . . . . . . . .5 Optical Characteristics at 700mA, Junction Temperature, TJ = 25C . . . . . . . . . . . . . . . . . . .5 Absolute Maximum Ratings Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Wavelength Characteristics, TJ = 25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Forward Current Characteristics, TJ = 25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 Current Derating Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Representative Typical Spatial Radiation Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Average Lumen Maintenance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 LUXEON V Portable Datasheet DS40 (8/06) 2 Mechanical Dimensions -- Emitter Lambertian LXHL PW03 Notes: 1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is required--slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. All dimensions without tolerances are for reference only. Side Emitting LXHL DW03 Notes: 1. The anode side of the device is denoted by a hole in the lead frame. Electrical insulation between the case and the board is required--slug of device is not electrically neutral. Do not electrically connect either the anode or cathode to the slug. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. All dimensions without tolerances are for reference only. LUXEON V Portable Datasheet DS40 (8/06) 3 Mechanical Dimensions -- Star Lambertian--LXHL LW6C and Side Emitting--LXHL FW6C Side Emitting Lambertian (High Dome) Notes: 1. Slots in aluminum core PCB for M3 or #4 mounting screw. 2. Electrical interconnection pads labeled on the aluminum core PCB with "+" and " " to denote positive and negative, respectively. All positive pads are interconnected, as are all negative pads, allowing for flexibility in array interconnection. 3. Electrical insulation between neighboring Stars is required - aluminum board is not electrically neutral. 4. Drawings not to scale. 5. All dimensions are in millimeters. Part Number Matrix Table 1. Part Number LXHL PW03 LXHL LW6C LXHL DW03 LXHL FW6C Beam Pattern Lambertian Lambertian Side Emitting Side Emitting Configuration Emitter Star Emitter Star Drive Current 700 mA 700 mA 700 mA 700 mA Flux Characteristics at 700mA, Junction Temperature, TJ = 25C Table 2. LUXEON V LXHL PW03 LXHL LW6C LXHL DW03 LXHL FW6C Configuration Emitter Star Emitter Star Radiation Pattern Lambertian Lambertian Side Emitting Side Emitting Minimum Luminous Flux (lm) V [1,2] Typical Luminous Flux (lm) V [2] 87.4 87.4 87.4 87.4 120 120 105 105 Notes for Table 2: 1. Minimum luminous flux or performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of 10% on flux measurements. 2. LUXEON types with even higher luminous flux levels will become available in the future. Please consult your Philips Lumileds Authorized Distributor or Philips Lumileds sales representative for more information. LUXEON V Portable Datasheet DS40 (8/06) 4 Electrical Characteristics at 700mA, Junction Temperature, TJ = 25C Table 3. Part Number LXHL PW03 LXHL DW03 LXHL LW6C LXHL FW6C Forward Voltage VF [1] (V) Min. Typ. Max. 5.43 5.43 5.43 5.43 6.84 6.84 6.84 6.84 8.31 8.31 8.31 8.31 Dynamic Resistance () RD 1.0 1.0 1.0 1.0 [2] Temperature Coefficient of Forward Voltage [3] (mV/C) VF / TJ 4.0 4.0 4.0 4.0 Thermal Resistance, Junction to Slug or Case (C/W) RJ C 8 8 11 11 Notes for Table 3: 1. Philips Lumileds maintains a tolerance of 0.06V on forward voltage measurements. 2. Dynamic resistance is the inverse of the slope in linear forward voltage model for LEDs. See Figures 3. 3. Measured between 25C TJ 110C at IF = 700mA. Optical Characteristics at 700mA, Junction Temperature, TJ = 25C Table 4. Radiation Pattern Lambertian Side Emitting Color White White Min. 4500 K 4500 K Color Temperature CCT Typ. 5500 K 5500 K [1] Max. 10,000 K 10,000 K Notes for Table 4: 1. CRI (Color Rendering Index) for White product types is 70. Philips Lumileds maintains a 5% tester tolerance on CCT. 2. All products built with Indium Gallium Nitride (InGaN). Optical Characteristics at 700mA, Junction Temperature, TJ = 25C, Cont'd Table 5. Radiation Pattern Lambertian Color White Total Included Angle [1] (degree) 0.90V 150 Viewing Angle (degree) 2 1/2 120 [2] Notes for Table 5: 1. Total angle at which 90% of total luminous flux is captured. 2. 1/2 is the off axis angle from lamp centerline where the luminous intensity is 1/2 of the peak value. Optical Characteristics at 700mA, Junction Temperature, TJ = 25C, Cont'd Table 6. Radiation Pattern Side Emitting Color White Typical total flux percent within first 45 [1] Cum 45 <30% Typical angle of peak intensity [2] PEAK 75 - 85 Notes for Table 6: 1. Cumulative flux percent within 45 from optical axis. 2. Off axis angle from lamp centerline where the luminous intensity reaches peak off axis value. On axis peak may be higher than off axis peak. LUXEON V Portable Datasheet DS40 (8/06) 5 Absolute Maximum Ratings Table 7. Emitter White 700 1000 700 Parameter DC Forward Current (mA) [1] Peak Pulsed Forward Current (mA) Average Forward Current (mA) ESD Sensitivity [2] 16,000V HBM 135 [3] LED Junction Temperature (C) Aluminum Core PCB Temperature ( C) Storage Temperature (C) Soldering Temperature (C) [4] 70 40 to +120 260 for 5 seconds max Notes for Table 7: 1. Proper current derating must be observed to maintain junction temperature below the maximum. For more information, consult the LUXEON Design Guide, available upon request. 2. LEDs are not designed to be driven in reverse bias. Please consult Philips Lumileds' application brief AB11 for further information. 3. Allowable maximum board temperature to avoid exceeding maximum junction temperature at maximum Vf limit at 700 mA based on thermal resistance of Star assembly. 4. Measured at leads, during lead soldering and slug attach, body temperature must not exceed 120C. LUXEON emitters cannot be soldered by general IR or Vapor phase reflow, nor by wave soldering. Lead soldering is limited to selective heating of the leads, such as by hot bar reflow, fiber focussed IR, or hand soldering. The package back plane (slug) may not be attached by soldering, but rather with a thermally conductive adhesive. Electrical insulation between the slug and the board is required. Please consult Philips Lumileds' Application Brief AB10 on LUXEON Emitter Assembly Information for further details on assembly methods. Wavelength Characteristics, TJ = 25C Relative Spectral Power Distribution 1 .0 0.8 0.6 0.4 0.2 0.0 350 400 450 500 550 600 650 700 750 800 Wavelength (nm) Wavelength Figure 1. White Color Spectrum of typical CCT part, integrated measurement. LUXEON V Portable Datasheet DS40 (8/06) 6 Light Output Characteristics 130 120 110 100 90 80 70 60 50 -20 0 20 40 60 80 o Relative Light Output (%) 100 120 Junction Temperature, T J ( C) Figure 2. Relative Photometric Flux vs. Junction Temperature. Note: Driving these high power devices at currents less than the test conditions may produce unpredictable results and may be subject to variation in performance. Pulse width modulation (PWM) is recommended for dimming effects. IF - Average Forward Current (mA) 800 700 600 500 400 300 200 100 0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 V F - Forw ard Voltage (Volts) Forward Current Characteristics, TJ = 25C Figure 3. Forward Current vs. Forward Voltage. 1.2 Normalized Relative Radiometric Power 1 0.8 0.6 0.4 0.2 0 0 100 200 200 400 300 600 400 800 IF - Average Forw ard Current (mA) Figure 4. Relative Luminous Flux vs. Forward Current at Tj = 25C maintained. LUXEON V Portable Datasheet DS40 (8/06) 7 Current Derating Curves IF - Forward Current (mA) 800 700 600 500 400 300 200 100 0 0 25 50 75 100 125 150 TA - Am bient Tem perature ( C) Figure 5. Maximum Forward Current vs. Ambient Temperature derating based on TJMAX = 135C. R J-A=20 oC/W R J-A=1 oC/W 5 0 R J-A=1 oC/W Representative Typical Spatial Radiation Pattern Note: For more detailed technical information regarding LUXEON radiation patterns, please consult your Philips Lumileds Authorized Distributor or Philips Lumileds sales representative. Lambertian Radiation Pattern 100 Relative Intensity (%) 90 80 70 60 50 40 30 20 10 0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Angular Displacement (Degrees) Figure 6. Representative Typical Spatial Radiation Pattern for LXHL PW03 and LXHL LW6C. LUXEON V Portable Datasheet DS40 (8/06) 8 Side Emitting Radiation Pattern 100 90 Relative Intensity (%) 80 70 60 50 40 30 20 10 0 -120 -100 -80 -60 -40 -20 0 20 40 60 80 100 120 Angular Displacement (Degrees) Figure 7. Representative Typical Spatial Radiation Pattern for LXHL DW03 and LXHL FW6C. Average Lumen Maintenance Characteristics Table 8. Heat Sink Temperature 35C 75C 85C Drive Current 700 mA 700 mA 600 mA Average Lumen Maintenance After 500 Hours of Operation 90% 75% 65% Notes for Table 8: 1. LUXEON V Portable is designed primarily for portable lighting and other applications requiring operating lifetimes of 500 hours and less. While the device will operate past 500 hours, its lumen maintenance cannot yet be characterized. Longer life versions of white LUXEON V will become available in the future. 2. Average lumen maintenance is dependant on heat sink temperature. A recoverable light output loss may occur during the first 500 hours of operation. 3. For additional information please consult your Philips Lumileds Authorized Distributor or Philips Lumileds sales representative. LUXEON V Portable Datasheet DS40 (8/06) 9 Emitter Reel Packaging Figure 8. Reel dimensions and orientation. Lambertian Side Emitting Figure 9. Tape dimensions. Notes: 1. LUXEON V emitters should be picked up by the body (not the lens) during placement. The inner diameter of the pick up collet should be greater than or equal to 6.5 mm. Please consult Philips Lumileds Application Brief AB10 on LUXEON Emitter Assembly Information for further details on assembly methods. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. All dimensions without tolerances are for reference only. LUXEON V Portable Datasheet DS40 (8/06) 10 Company Information LUXEON(R) is developed, manufactured and marketed by Philips Lumileds Lighting Company. Philips Lumileds is a world class supplier of Light Emitting Diodes (LEDs) producing billions of LEDs annually. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors (Red, Green, Blue) and White. Philips Lumileds has R&D centers in San Jose, California and in The Netherlands and production capabilities in San Jose and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid state LED technology and the lighting world. Philips Lumileds technology, LEDs and systems are enabling new applications and markets in the lighting world. www.luxeon.com www.lumiledsfuture.com Philips Lumileds may make process or materials changes affecting the perform ance or other characteristics of our products. These products supplied after such changes will continue to meet published specifications, but may not be identical to products supplied as samples or under prior orders. For technical assistance or the location of your nearest sales office contact any of the following: North America: +1 888 589 3662 or askluxeon@futureelectronics.com Europe: 00 800 443 88 873 or luxeon.europe@futureelectronics.com (c)2006 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. Luxeon is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. Asia: 800 5864 5337 or lumileds.asia@futureelectronics.com |
Price & Availability of LXHL-DW03
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |