 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET SMP1340 Series: Fast Switching Speed, Low Capacitance, Plastic Packaged PIN Diodes Features Designed for fast-speed wireless switch applications 1.0 resistance, 0.3 pF capacitance Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 C(1) per JEDEC J-STD-020 Available in tape and reel packaging Description The SMP1340 series of plastic packaged, surface mountable PIN diodes is designed for high-volume switch applications from 10 MHz to beyond 2 GHz. The short carrier lifetime of typically 100 ns, combined with its thin I region width of nominally 7 m, results in a fast-speed RF switching PIN diode. The RF performance of the SMP1340 series is assured by virtue of its low capacitance (0.3 pF) and low resistance (1.0 at 10 mA). The SMP1340-508 has been specifically designed for WLAN 802.11 a, b, and g applications. Absolute Maximum Ratings Characteristic Reverse voltage (VR) Power dissipation @ 25 C lead temperature (PD) Storage temperature (TST) Operating temperature (TOP) ESD human body model Value 50 V 250 mW -65 C to +150 C -65 C to +150 C Class 1B NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. 1. -508 package MSL-1@ 250 C Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200051 Rev. A * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * February 23, 2006 1 DATA SHEET * SMP1340 SERIES Common Anode SOT-23 SMP1340-003 Marking: PS9 SMP1340-003LF Marking: RS9 LS = 1.5 nH Common Cathode SOT-23 SMP1340-004 Marking: PS3 SMP1340-004LF Marking: RS3 LS = 1.5 nH Series Pair SOT-23 SMP1340-005 Marking: PS2 SMP1340-005LF Marking: RS2 LS = 1.5 nH SC-70 SMP1340-075LF Marking: RS2 LS = 1.4 nH Single SOD-323 SMP1340-011 Marking: PS SMP1340-011LF Marking: RS LS = 1.5 nH Common Cathode SC-70 SMP1340-074 Marking: PS3 SMP1340-074LF Marking: RS3 LS = 1.4 nH Single SC-79 SMP1340-079 Anti-Parallel LGA SMP1340-508 Lead (Pb)-Free Marking: X SMP1340-079LF LS = 0.7 nH LS = 0.6 nH LF denotes lead (Pb)-free, RoHS-compliant packaging option as an alternative to our standard tin/lead (Sn/Pb) packaging. BUY NOW Innovation to GoTM Select Linear Products (indicated by ) now available for purchase online. Electrical Specifications at 25 C Parameter Reverse current (IR) Capacitance (CT) Resistance (RS) Resistance (RS) Resistance (RS) Forward voltage (VF) Carrier lifetime (TI) I region width Condition VR = 50 V F = 1 MHz, V = 5 V F = 100 MHz, I = 1 mA F = 100 MHz, I = 5 mA F = 100 MHz, I = 10 mA IF = 10 mA IF= 10 mA 0.21 1.7 1 0.85 0.85 100 7 2 1.2 Typ. Max. 10 0.3 Unit A pF V ns m Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 February 23, 2006 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200051 Rev. A DATA SHEET * SMP1340 SERIES Typical Performance Data 100 100 Series Resistance () 10 Forward Current (mA) 0.1 1 10 100 10 1 1 0.1 0.1 0.01 0.01 0.6 0.7 0.8 0.9 1.0 Forward Current (mA) Forward Voltage (mV) Series Resistance vs. Current @ 100 MHz 0.30 350 300 DC Characteristic 0V Capacitance (pF) 0.25 250 Conductance (S) 200 150 100 10 V 50 0 40 V 0.20 1 MHz-1 GHz 0.15 0.10 0 5 10 15 20 25 30 35 40 -50 0 500 1000 1500 2000 Reverse Voltage (V) Frequency (MHz) Capacitance vs. Reverse Voltage Conductance vs. Frequency and Reverse Voltage Resistance vs. Temperature @ 500 MHz IF (mA) 0.02 0.1 0.3 0.5 1 10 20 100 R -55 C () 9.92 3.9 2.32 1.91 1.54 0.95 0.86 0.72 R -40 C () 9.68 3.86 2.33 1.93 1.55 0.96 0.87 0.73 R -15 C () 9.3 3.79 2.3 1.9 1.52 0.91 0.82 0.7 R 25 C () 8.95 3.8 2.33 1.92 1.53 0.9 0.81 0.68 R 65 C () 8.95 3.85 2.35 1.92 1.5 0.82 0.73 0.59 R 85 C () 9.01 3.94 2.43 1.99 1.56 0.85 0.75 0.62 R 100 C () 9.12 4.03 2.49 2.05 1.61 0.89 0.79 0.65 Recommended Solder Reflow Profiles Refer to the "Recommended Solder Reflow Profile" Application Note. Tape and Reel Information Refer to the "Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation" Application Note. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200051 Rev. A * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * February 23, 2006 3 DATA SHEET * SMP1340 SERIES SOT-23 0.110 (2.80 mm) Min. 0.120 (3.04 mm) Max. 3 SOD-323 0.012 (0.30 mm) Min. 0.020 (0.50 mm) Max. 0.047 (1.20 mm) Min. 0.055 (1.40 mm) Max. 1 2 0.090 (2.30 mm) Min. 0.108 (2.74 mm) Max. 0.010 (0.25 mm) Min. 0.016 (0.40 mm) Max. 0.063 (1.60 mm) Min. 0.071 (1.80 mm) Max. 0.083 (2.10 mm) Min. 0.104 (2.64 mm) Max. 0.045 (1.15 mm) Min. 0.053 (1.35 mm) Max. 1 2 0.037 (0.95 mm) Ref. 0.020 (0.51 mm) Ref. 0.076 (1.92 mm) Ref. 0.003 (0.080 mm) Min. 0.008 (0.20 mm) Max. 8 Max. 0.035 (0.89 mm) Min. 0.044 (1.12 mm) Max. Cathode Indicator 0.008 (0.20 mm) Nom. 0.006 (0.15 mm) Typ. 0.050 (1.25 mm) Max. 0.022 (0.55 mm) Ref. 0.0005 (0.01 mm) Min. 0.004 (0.10 mm) Max. 0.004 (0.10 mm) Max. 0.010 (0.25 mm) Min. SC-79 Cathode Indicator 0.010 (0.25 mm) Min. 0.014 (0.35 mm) Max. 1 SC-70 0.006 (0.15 mm) Min. 0.028 (0.70 mm) Min. 0.035 (0.90 mm) Max. 0.010 (0.25 mm) Min. 0.016 (0.40 mm) Max. 0.071 (1.80 mm) Min. 0.094 (2.40 mm) Max. 1 0.060 (1.50 mm) Min. 0.067 (1.70 mm) Max. 0.043 (1.10 mm) Min. 0.051 (1.30 mm) Max. 0.020 (0.50 mm) Min. 0.028 (0.70 mm) Max. 0.004 (0.10 mm) Min. 0.012 (0.30 mm) Max. 10 Max. 0.014 (0.35 mm) Ref. 0.026 (0.65 mm) Ref. 0.051 (1.30 mm) Ref. 0.004 (0.10 mm) Min. 0.007 (0.18 mm) Max. 0.031 (0.80 mm) Min. 0.039 (1.00 mm) Max. 2 0.071 (1.80 mm) Min. 0.087 (2.20 mm) Max. 2 3 0.045 (1.15 mm) Min. 0.053 (1.35 mm) Max. 10 Max. 0.003 (0.07 mm) Min. 0.008 (0.20 mm) Max. 0.000 (0.00 mm) Min. 0.004 (0.10 mm) Max. LGA 0.058 (1.47 mm) 0.054 (1.39 mm) Pin 3 0.048 (1.23 mm) 0.044 (1.13 mm) Pin 4 Top View (0.00) (0.40) (0.87) (1.27) Pin 1 Side View Pin 2 0.028 (0.70 mm) 0.023 (0.58 mm) (1.03) (0.73) (0.30) (0.00) Pin 4 (0.138 x 45) Pin 3 Pin 1 Pin 2 (0.076) All Around Bottom View Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 February 23, 2006 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200051 Rev. A DATA SHEET * SMP1340 SERIES Copyright (c) 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, "Breakthrough Simplicity" and "Innovation to Go" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Thirdparty brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200051 Rev. A * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * February 23, 2006 5 |
Price & Availability of SMP1340
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |