 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PMP 5 Rectifier Module Description The Power-One PMP 5 rectifier module provides a cost-effective power solution in a high density footprint. Built on the latest advances in the resonance switch mode approach (soft-switching), the PMP 5 is the next evolution in our small convection cooled rectifier series. Optimized for telecom applications, the module is designed to work in a multitude of different subrack/shelf configurations incorporating the PowerOne PCU controller and various distribution options. Features * 115/230 VAC input * 24V, or 48VDC output * Power factor correction * Active load sharing * Hot-swappable PPR 5/7 System Shown * Low weight * Natural convection cooling * International standards compliance www.power-one.com PMP 5 Rectifier Module Input Model Input Voltage Current (max.) Soft Start PMP 5.24 PMP 5.48 PMP 5.24-110 PMP 5.48-110 Mechanical Dimensions Weight Cooling <2.9A <8A peak max. 5ms <5.8A Insulation <16A peak max. 5ms Enclosure Mounting EN 61000-4-5 T 3,15A IEC-320/C14 EN 61000-6-2, EN 61000-6-3, FCC Part 15 Class B T 6A 62 x 129 x 232mm (2.4 x 5.1 x 9.1in.) 1.5kg (3.3lbs.) Natural convection Reinforced insulation tested at: 4.25 kV DC primary-secondary, 2.12 kV DC primary-ground, 2.12 kV DC secondary ground IP20 In 19" subrack up to 6 modules 195-276V AC single phase, (44-66Hz) 93,5-148,5V AC single phase, (44-66Hz) Harmonics Surge Immunity Fuse Connection EMC EN 610555 Power Factor >0.99 at 50-100% load Other Technical Data Safety EN 60950 Short circuit proof, automatic current limiting, selective shutdown of modules at excessive output voltage. Green LED Red LED Indications Red LED Audible Noise Operating Temperature Storage Temperature Radiated EMC Power ON High output voltage/ shutdown Low voltage/ module failure Protection Output Model Output Voltage Power (max.) Current (max.) Efficiency Tolerance Transient Response Load Sharing Ripple Psophometric Connection EMC PMP 5.24 22.5-28 VDC 448W 16A >87% Vout +/- 1% +/- 5% at load variation 10-90% or 90-10%, recovery time 10ms <5% of nominal current <100mV p-p (BW. 30MHz) Environment <2mV, according to CCITT norms DIN 41612F EN 61000-6-2, EN 61000-6-4 PMP 5.48 45-56 VDC 448W 8A >89% PMP 5.24-110 22.5-28 VDC 448W 16A >85% PMP 5.48-110 45-56 VDC 448W 8A >87% <35dBA -25 to +55C -40 to +85C EN 61000-6-2, EN 61000-6-3, FCC Part 15, Class B Storage: Transport: Operation: ETS 300 019-2-1 ETS 300 019-2-2 ETS 300 019-2-3 Note: All specifications are subject to change without notification. 11V0005-066 PMP 5 V3.0 RevD www.power-one.com |
Price & Availability of PMP524
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |