View SBE602_4162051.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number : EN8965
SBE602
SANYO Semiconductors
DATA SHEET
SBE602
Applications
*
Schottky Barrier Diode (Twin Type * Cathode Common)
30V, 70mA Rectifier
High frequency rectification (switching regulators, converters, choppers).
Features
* * * * *
Low forward voltage (VF max=0.55V). Fast reverse recovery time (trr max=10ns). Low switching noise. Low leakage current and high reliability due to highly reliable planar structure. Ultrasmall-sized package permitting SBE602-applied sets to be made small and slim.
Absolute Maximum Ratings at Ta=25C (Value per element)
Parameter Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature Symbol VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle Conditions Ratings 30 35 70 2 --55 to +125 --55 to +125 Unit V V mA A C C
Electrical Characteristics at Ta=25C (Value per element)
Parameter Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time Therrmal Resistance Symbol VR VF IR1 IR2 C trr Rth(j-a) IR=20A IF=70mA VR=2V VR=15V VR=10V, f=1MHz IF=IR=10mA, See specified Test Circuit. Mounted in Cu-foiled area of 0.72mm2!0.03mm on glass epoxy board 5.5 10 300 Conditions Ratings min 30 0.55 75 5.0 typ max Unit V V nA A pF ns C / W
Marking : SQ
Any and all SANYO Semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO Semiconductor representative nearest you before usingany SANYO Semiconductor products described or contained herein in such applications. SANYO Semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
O1806SB SY IM TC-00000234 No.8965-1/3
SBE602
Package Dimensions
unit : mm (typ) 7019A-002
2 1
Electrical Connection
2.0 0.25
0.15
3
2.1 1.6 0 to 0.02
3
1 : Anode 2 : Anode 3 : Cathode
Top view
1
0.25 0.65
2
0.3
0.85
0.07
1 : Anode 2 : Anode 3 : Cathode SANYO : MCPH3
trr Test Circuit
Duty10%
10mA
50 10s
100
10
--5V trr
3 2 0.1 7 5 3 2 0.01 7 5 100
10mA
1mA
IF -- VF
1000
IR -- VR
Ta=125C
Reverse Current, IR -- A
Forward Current, IF -- A
100C
10
75C
1.0
50C
25C
5C 100 C 75 C 50C 25C 0C --25 C
3 2 0.001 0
0.1
Ta= 12
0.01 0.2 0.3 0.4 0.5 0.6 0.7 IT11425 0 5 10 15 20 25 30 35 IT11426
0.1
Forward Voltage, VF -- V
Average Forward Power Dissipation, PF(AV) -- W
0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 0
Average Reverse Power Dissipation, PR(AV) -- W
PF(AV) -- IO
Reverse Voltage, VR -- V
4.0E--06 3.5E--06 3.0E--06 2.5E--06 2.0E--06
PR(AV) -- VR
Rectangular wave
360
(1)
(2) (4) (3)
(1)Rectangular wave =300 (2)Rectangular wave =240 (3)Rectangular wave =180 (4)Sine wave =180
Rectangular wave V
360 R 180 VR 360
(1) (2) (3)
Sine wave
180 360
Sine wave
1.5E--06 1.0E--06 5.0E--07 0.0E+00 0 5 10
(1)Rectangular wave =60 (2)Rectangular wave =120 (3)Rectangular wave =180 (4)Sine wave =180
0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08
(4)
15
20
25
30
35 IT11428
Average Output Current, IO -- A
IT11427
Peak Reverse Voltage, VR -- V
No.8965-2/3
SBE602
3
C -- VR
Surge Forward Current, IFSM(Peak) -- A f=1MHz
2.8
IFSM -- t
Current waveform 50Hz sine wave IS 20ms t
Interterminal Capacitance, C -- pF
2
2.4
2.0
10 7 5
1.6
1.2
0.8
3
0.4 0
2 0.1
2
3
5
7 1.0
2
3
5
7 10
2
3
5
7 0.01
2
3
5
7 0.1
2
3
5
7 1.0
2
3
Reverse Voltage, VR -- V
IT11429
Time, t -- s
ID00235
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of October, 2006. Specifications and information herein are subject to change without notice.
PS No.8965-3/3

▲Up To Search▲

Price & Availability of SBE602

	To Download SBE602 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .