View OVSRWACR6_4149719.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

White Surface Mount LED Lamp
OVSRWACR6
* * *
Side-view white LED Surface mount lead frame package with two pins Wide viewing angles
Product Photo Here
The OVSRWACR6 is ideal for backlighting LCD screens and for coupling with light guides. This design combines high optical efficiency with wide viewing angles (x = 120 y = 110 and low power consumption. , ) Applications * LCD backlight * Hand-held appliances * Indicators * Switch and message illumination Part Number OVSRWACR6 Material GaN Emitted Color White Intensity Typ. mcd 1000 Lens Color Water Clear
DIMENSIONS ARE IN: RoHS Moisture
[MILLIMETERS] INCHES
DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Issue A.3 03/07 Page 1 of 7
White Surface Mount LED Lamp
OVSRWACR6 Absolute Maximum Ratings
Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Forward Current Reduction Peak Forward Current (10% Duty Cycle, 1 KHz) Power Dissipation
TA = 25o C (on metal core PCB1) unless otherwise noted
-40 ~ +100 C -30 ~ +85 C 5V 30 mA -0.50 mA/ C 80 mA 120 mW
Electrical Characteristics
SYMBOL IV VF IR 2 1/2 x y
TA = 25o C (on metal core PCB1) unless otherwise noted
PARAMETER Luminous Intensity Forward Voltage Reverse Current 50% Power Angle Chromaticity Coordinates
1
MIN ---2.8 -------
TYP 1000 3.4 ---x=120 y=110
MAX ---3.9 5.0 ----
UNITS mcd V A deg -------
CONDITIONS IF = 20 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA
Ranking Table Applies (see below)
Standard Bins (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown. Orders for OVSPWFCR6 may be filled with any or all bins contained as below.
Luminous Intensity (mcd)
AA 1000-1100 930-1000 860-930
AB
AC
AD
BE
BF
BG
BH
BJ
BK 8 7 6
Chromaticity Coordinates (x, y)
x y x y x y AA 0.263 0.255 0.266 0.273 0.245 0.254 0.268 0.259 AD 0.279 0.273 0.282 0.287 0.249 0.259 0.274 0.263 BG 0.287 0.298 0.300 0.290 0.291 0.302 0.292 0.281 Rank Chromaticity Coordinates x y
Luminous Intensity is at 6 bin or above.
Rank Chromaticity Coordinates Rank Chromaticity Coordinates Rank Chromaticity Coordinates
AB AC 0.271 0.263 0.273 0.279 0.273 0.266 0.278 0.282 0.235 0.245 0.259 0.249 0.259 0.268 0.282 0.274 BE BF 0.278 0.287 0.290 0.282 0.282 0.290 0.293 0.287 0.282 0.291 0.281 0.274 0.274 0.281 0.270 0.263 BH BJ 0.290 0.300 0.302 0.293 0.300 0.298 0.307 0.308 0.281 0.292 0.281 0.270 0.292 0.302 0.311 0.300 BK 0.302 0.300 0.308 0.309 0.281 0.292 0.300 0.289
Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content <1000 PPM. 3. To designate luminous intensity ranks, please contact OPTEK.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 03/07 Page 2 of 7 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Phone: (972) 323-2200 or (800) 341-4747
White Surface Mount LED Lamp
OVSRWACR6 CIE Chromaticity Diagram
0.35
BJ
0.30
BG BE BK BH AA BF AD AB
Y
AC
0.25
0.20 0.20 0.25 0.30 0.35
X
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.3 03/07 Page 3 of 7
White Surface Mount LED Lamp
OVSRWACR6 Typical Electro-Optical Characteristics Curves
mA
%
V
C
Forward Current vs Forward Voltage
Relative Luminous Intensity vs Ambient Temperature
100 80 60
%
40 20 0 350 400 450 500 550 600 650 700 750 nm
mA
Relative Luminous Intensity vs Forward Current
Relative Emission Intensity
X
Y
Relative Luminous Intensity
Relative Luminous Intensity
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 03/07 Page 4 of 7 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Phone: (972) 323-2200 or (800) 341-4747
White Surface Mount LED Lamp
OVSRWACR6 Packing Information: 7-inch reel
Carrier Tape Dimensions: Loaded quantity 3000 pieces per reel
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.3 03/07 Page 5 of 7
White Surface Mount LED Lamp
OVSRWACR6 Moisture Resistant Reel Packaging
Label
Aluminum Moisture-proof Bag
Desiccant
Bar Code Label
Recommended Soldering Pattern
(Unit: mm)
1.4
1.0
1.4
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A.3 03/07 Page 6 of 7 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Phone: (972) 323-2200 or (800) 341-4747
0.9
White Surface Mount LED Lamp
OVSRWACR6
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.3 03/07 Page 7 of 7

▲Up To Search▲

Price & Availability of OVSRWACR6

	To Download OVSRWACR6 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .