 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HWS426 GaAs DC-6 GHz SPDT Switch September 2006 V2 Features * Low Insertion Loss: 0.5 dB @ 2.5 GHz SOT-363 0.9 dB @ 5.8 GHz * Isolation: 26 dB @ 2.5 GHz 17 dB @ 5.8 GHz * Low DC Power Consumption * Low Cost SOT-363 Plastic Lead (Pb) Free Package, RoHS Compliant Description The HWS426 is a GaAs SPDT switch operating at DC-6 GHz in a low cost SOT-363 plastic lead (Pb) free package. The HWS426 features low insertion loss with very low DC power consumption. This switch can be used in IEEE 802.11a/b/g WLAN systems for transmit/receive selection or antenna diversity function. Electrical Specifications at 25 with 0, +3V Control Voltages C Parameter Insertion Loss Test Conditions 0.1-6.0 GHz 2.4-2.5 GHz 4.9-5.8 GHz 0.1-6.0 GHz 2.4-2.5 GHz 4.9-5.8 GHz 0.1-6.0 GHz 2.4-2.5 GHz 4.9-5.8 GHz 0.1-6.0 GHz 2.0-6.0 GHz 2.0-6.0 GHz 21 15 21 14 Min. Typ. 1.0 0.5 0.9 17 26 18 16 26 17 20 30 33 20 1 100 Max. Unit dB dB dB dB dB dB dB dB dB dB dBm dBm ns uA 0.7 1.1 Isolation 1 (RF1-RF2) Isolation 2 (RFC-RF1, RFC-RF2) Return Loss Input Power for 0.1 dB Compression Input Power for One dB Compression Switching Time Control Current Note: All measurements made in a 50 ohm system with 0/+3V control voltages, unless otherwise specified. Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. HWS426 GaAs DC-6 GHz SPDT Switch September 2006 V2 Typical Performance Data @ +25 C Insertion Loss vs Frequency -0.2 Insertion Loss(dB) Absolute Maximum Ratings Parameter RF Input Power 0.5-2.5 GHz Control Voltage Operating Temperature Storage Temperature Absolute Maximum +34 dBm +6V -40 to +85C C -65 to +150 C C -0.4 -0.6 -0.8 -1.0 Pin Out (Top View) -1.2 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency(GHz) CB RF2 GND 1 2 3 6 5 CA VC2 RFC CB VC1 CA Isolation vs Frequency -10 -15 Isolation(dB) RF1 to RF2 RFC to RF1 or RF2 RF1 CB 4 -20 -25 -30 -35 -40 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency(GHz) DC blocking capacitors CB = 8pF and by-pass capacitors CA=8pF are required on all RF ports and control lines. Logic Table for Switch On-Path VC1 1 0 VC2 0 1 RFC-RF1 Insertion Loss Isolation RFC-RF2 Isolation Insertion Loss Return Loss vs Frequency -10 Return Loss(dB) -15 -20 -25 -30 -35 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Frequency(GHz) `1' = +3V to +5V `0' = 0V to +0.2V Hexawave Inc. 2 Prosperity Road II, Science Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. |
Price & Availability of HWS426
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |