![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
OM7629NM OM7630NM OM7631NM HERMETIC SURFACE MOUNT FIXED VOLTAGE POSITIVE REGULATORS Three Terminal, Fixed Voltage, 1.5 Amp Precision Positive Regulators In Hermetic Surface Mount Package FEATURES * * * * * * Hermetic Surface Mount Package Output Voltages: +5V, +12V, +15V Output Voltages Set Internally To 1% Built-In Thermal Overload Protection Short Circuit Current Limiting Product Is Available Hi-Rel Screened DESCRIPTION These three terminal positive regulators are supplied in a hermetically sealed surface mount package. All protective features are designed into the circuit including thermal shutdown, current limiting and safe-area control. With heat sinking, they can deliver over 1.5 amps of output current. These units feature internally trimmed output voltages to 1% of nominal voltage. Standard voltages are +5V, +12V, and +15V. These units are ideally suited for Military applications where a hermetic surface mount package is required. ABSOLUTE MAXIMUM RATINGS Input to Output Voltage Differential. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +35 V Operating Junction Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . - 55C to + 150C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55C to + 150C Typical Power/Thermal Characteristics: Rated Power @ 25C TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.5W TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3W Thermal Resistance: JC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5C/W JA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42C/W Lead Temperature at Case (5 sec). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225C 3.5 4 11 R1 Supersedes 1 05 R0 3.5 - 119 OM7629NM - OM7631NM ELECTRICAL CHARACTERISTICS 5 Volt Parameter Output Voltage Symbol VOUT VRLINE VIN = 10V, Io = 500mA, -55C TA 125C (unless otherwise specified) Min. 4.92 Max. 5.08 5.15 5 Unit V V mV mV mV mV mV mV mV mV mA mA mA Test Conditions TA = 25C VIN = 7.5V to 20V * * 4.85 Line Regulation (Note 1) VIN = 7.5V to 20V VIN = 8.0V to 12V 12 4 * Load Regulation (Note 1) IO = 250mA to 750 mA VRLOAD IO = 5mA to 1.5 Amp 10 12 * * 25 6 15 6 Standby Current Drain ISCD ISCD (Line) ISCD (Load) VDO IO (pk) IDS VIN VOUT NO VOUT t TA = 25C, VOUT = 100mV, IO = 1.0A TA = 25C VIN = 35V 1.5 IO = 5mA to 1000mA VIN = 7.5V to 20V Standby Current Drain Change With Line Standby Current Drain Change With Load Dropout Voltage Peak Output Current Short Circuit Current (Note 2) Ripple Rejection * * * 6.5 0.8 0.5 mA 2.5 3.3 1.2 V A A A dB dB * f =120 Hz, VIN = 10V (Note 3) TA = 25C, f =10 Hz to 100KHz TA = 25C, t = 1000 hrs. 66 2.8 * 60 40 Output Noise Voltage (Note 3) Long Term Stability (Note 3) V/V RMS 75 mV ELECTRICAL CHARACTERISTICS 12 Volt Parameter Output Voltage Symbol VOUT VRLINE VIN = 19V, Io = 500mA, -55C TA 125C (unless otherwise specified) Min. 11.88 Max. 12.12 12.36 18 Unit V V mV mV mV mV mV mV mV mV mA mA mA Test Conditions TA = 25C VIN = 14.5V to 27V * * 11.64 Line Regulation (Note 1) VIN = 14.5V to 27V VIN = 16V to 22V 50 9 * Load Regulation (Note 1) IO = 250mA to 750 mA VRLOAD IO = 5mA to 1.5 Amp 30 32 * * 60 20 40 6.0 Standby Current Drain ISCD ISCD (Line) ISCD (Load) VDO IO (pk) IDS VIN VOUT NO VOUT t VOUT = 100mV, IO = 1.0A TA = 25C VIN = 35V IO = 5mA to 1000mA VIN = 15V to 30V Standby Current Drain Change With Line Standby Current Drain Change With Load Dropout Voltage Peak Output Current Short Circuit Current (Note 2) Ripple Rejection * * * * 1.5 6.5 0.8 0.5 mA 2.5 3.3 1.2 V A A A dB dB * f =120 Hz, VIN = 10V (Note 3) TA = 25C, f =10 Hz to 100KHz TA = 25C, t = 1000 hrs. 61 2.8 * 54 40 Output Noise Voltage (Note 3) Long Term Stability V/V RMS 120 mV 3.5 (Note 3) Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. Short Circuit protection is only assured up to VIN = 35V. 3. If not tested, shall be guaranteed to the specified limits. The * denotes the specifications which apply over the full operating temperature range. 3.5 - 120 OM7629NM - OM7631NM ELECTRICAL CHARACTERISTICS 15 Volt Parameter Output Voltage Symbol VOUT VRLINE VIN = 23V, Io = 500mA, -55C TA 125C (unless otherwise specified) Min. 14.8 Max. 15.2 15.4 20 Unit V V mV mV mV mV mV mV mV mV mA mA mA Test Conditions TA = 25C VIN = 18.5V to 30V * * 14.6 Line Regulation (Note 1) VIN = 17.5V to 30V VIN = 20V to 26V 50 15 * Load Regulation (Note 1) VRLOAD IO = 5mA to 1.5 Amp IO = 5mA to 1.0 Amp IO = 250mA to 750 mA 25 35 * * 75 21 45 6.0 Standby Current Drain ISCD ISCD (Line) ISCD (Load) VDO IO (pk) IDS VIN VOUT NO VOUT t TA = 25C, VOUT = 100mV, IO = 1.0A TA = 25C VIN = 35V 1.5 IO = 5mA to 1000mA VIN = 18.5V to 30V Standby Current Drain Change With Line Standby Current Drain Change With Load Dropout Voltage Peak Output Current Short Circuit Current (Note 2) Ripple Rejection * * * 6.5 0.8 0.5 mA 2.5 3.3 1.2 V A A A dB dB * f =120 Hz, VIN = 10V (Note 3) TA = 25C, f =10 Hz to 100KHz TA = 25C, t = 1000 hrs. 54 2.8 * 52 40 Output Noise Voltage (Note 3) Long Term Stability (Note 3) V/V RMS 150 mV Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. Short Circuit protection is only assured up to VIN = 35V. 3. If not tested, shall be guaranteed to the specified limits. The * denotes the specifications which apply over the full operating temperature range. TYPICAL PERFORMANCE CHARACTERISTICS PEAK OUTPUT CURRENT 3.5 3 Tj = -55C DROPOUT VOLTAGE 2.5 100 IOUT = 1A RIPPLE REJECTION Input To Output Differential (V) 2 2.5 2 1.5 1 0.5 VOUT = 100mV Tj = 150C 1.5 IOUT = 500mA Ripple Rejection (dB) 80 VOUT = 5V Output Current (A) 60 Tj = 25C 3.5 VIN - V = 8VDC +3.5Vrms IOUT = 1A Tj = 25C 1 IOUT = 0A 40 0.5 VOUT = 100MV 20 0 0 5 10 15 20 25 30 35 0 0 -75-50 -25 0 2 5 5 0 7 5 100 125150 10 100 1k 10k Input To Output Differential (V) Junction Temperature (C) Frequency (Hz) 3.5 - 121 OM7629NM - OM7631NM TYPICAL APPLICATIONS FIXED OUTPUT REGULATOR CIRCUIT FOR INCREASING OUTPUT VOLTAGE INPUT 1 OM7629NM 2 OUTPUT INPUT 1 OM7629NM 2 OUTPUT R1 0.1 F 0.33 Ft 3 0.1 F* Vxx 0.33 F 3 IQ R2 * Increasing value of output capacitor improves system transient response t Required only if regulator is located an appreciable distance from power supply filter. VO = Vxx (1 +R2) + IQR2 R1 HIGH OUTPUT CURRENT, SHORT CIRCUIT PROTECTED RSC 2N4398 ADJUSTABLE OUTPUT REGULATOR, 7 TO 30 VOLTS INPUT 1 2 OUTPUT INPUT OM7629NM 3 R1 3 2N6124 1 OM7629NM 2 OUTPUT 0.33 F LM741 + 1K 10K 0.1 F 0.33 F 3 0.1 F PIN CONNECTION 1 2 MECHANICAL OUTLINE .140 .140 .015 .075 .140 .075 .500 .157 .030 MIN. .625 3 .415 Pin 1: In Pin 2: Out Pin 3: Ground .062 .375 TOP VIEW SIDE VIEW BOTTOM VIEW |
Price & Availability of OM7631NM
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |