 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 3.5x2.8 mm SMD CHIP LED LAMP KA-3528SURC HYPER RED Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. AVAILABLE ON TAPE AND REEL. IDEAL FOR BACKLIGHTING. PACKAGE : 1500PCS / REEL. RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAA7666 APPROVED: J. Lu REV NO: V.9 CHECKED: Allen Liu DATE: MAR/16/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. KA-3528SURC HYPER RED (InGaAlP) WATER CLEAR 110 Typ. 230 Viewing Angle 21/2 120 Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol peak D 1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 640 628 27 45 1.9 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 125 50 185 5 -40C To +85C Units mW mA mA V SPEC NO: DSAA7666 APPROVED: J. Lu REV NO: V.9 CHECKED: Allen Liu DATE: MAR/16/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 Hyper Red KA-3528SURC SPEC NO: DSAA7666 APPROVED: J. Lu REV NO: V.9 CHECKED: Allen Liu DATE: MAR/16/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 KA-3528SURC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA7666 APPROVED: J. Lu REV NO: V.9 CHECKED: Allen Liu DATE: MAR/16/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 |
Price & Availability of KA-3528SURC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |