 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ALUMINUM ELECTROLYTIC CAPACITORS MF 5mmL, Low Impedance series Low impedance over wide temperature range of - 55 ~ +105C, with 5mm height. Suited for DC-DC converters where smaller case size and lower impedance are required. Adapted to the RoHS directive (2002/95/EC). MF Low Impedance MT Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Rated Capacitance Tolerance Leakage Current tan Performance Characteristics - 55 ~ +105C 6.3 ~ 35V 1 ~ 100F 20% at 120Hz, 20C After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (A), whichever is greater. Measurement frequency : 120Hz, Temperature : 20C Rated voltage (V) tan (MAX.) 6.3 0.22 10 0.20 6.3 2 4 10 2 4 16 0.18 16 2 3 25 0.14 25 2 3 35 0.12 35 2 3 Measurement frequency : 120Hz Stability at Low Temperature Rated voltage (V) Z- 25C / Z+20C Impedance ratio ZT / Z20 (MAX.) Z- 55C / Z+20C Endurance After 1000 hours' application of rated voltage at 105C capacitors meet the characteristic requirements listed at right. Capacitance change tan Leakage current Within 20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Marking After storig the capacitors under no load at 105C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the specified value for endurance characteristics listed above. Printed with white color letter on dark brown sleeve. Radial Lead Type Sleeve (P.E.T.) d Type numbering system (Example : 25V 10F) 1 2 3 4 5 6 7 8 9 10 11 UMF 1 E 1 0 0 M DD Configuration D+0.5 MAX P 0.5 Capacitance tolerance ( 20%) Rated capacitance (10F) (mm) Rated voltage (25V) Series name Type Configuration D 4 ~ 6.3 Pb-free leadwire Pb-free PET sleeve L+1MAX 15 MIN 4 MIN D P d 4 1.5 0.45 5 2.0 0.45 6.3 2.5 0.45 DD Dimensions Cap.(F) V Code 6.3 0J 10 1A 16 1C 25 1E 4x5 4x5 4x5 4x5 4x5 5x5 5x5 6.3 x 5 6.3 x 5 1 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 010 1R5 2R2 3R3 4R7 6R8 100 150 220 330 470 680 101 4x5 5x5 5x5 6.3 x 5 6.3 x 5 5.0 2.6 2.6 1.3 1.3 50 80 80 115 115 5x5 5x5 6.3 x 5 2.6 2.6 1.3 80 80 115 4x5 5x5 5x5 6.3 x 5 6.3 x 5 5.0 2.6 2.6 1.3 1.3 50 80 80 115 115 4x5 4x5 5x5 6.3 x 5 6.3 x 5 6.3 x 5 5.0 5.0 2.6 1.3 1.3 1.3 50 50 80 115 115 115 35 1V 5.0 5.0 5.0 5.0 5.0 2.6 2.6 1.3 1.3 50 50 50 50 50 80 80 115 115 Case size Impedance Rated ripple DxL (mm) Max. Impedance () at 20C 100kHz Rated Ripple (mArms) at 105C 100kHz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.35 120 Hz 0.50 300 Hz 0.64 1 kHz 0.83 10 kHz ~ 1.00 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V |
Price & Availability of UMF1E010MDD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |