View RT9817C-12PH_4120485.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RT9817
Micro-Power Voltage Detectors with Manual Reset
General Description
The RT9817 is a micro-power voltage detector with deglitched manual reset input supervising the power supply voltage level for microprocessors (P) or digital systems. It provides internally fixed threshold levels with 0.1V per step ranging from 1.2V to 5V, which covers most digital applications. It features low supply current of 3A. The RT9817 performs supervisory function by sending out a reset signal whenever the VDD voltage falls below a preset threshold level. This reset signal will last the whole period before VDD recovering. Once VDD recovered upcrossing the threshold level, the reset signal will be released after a certain delay time. To pull reset signal low manually, just pull the manual reset input (MR) below the specified VIL level. RT9817 is provided in SC-82 and SOT-143 packages.
Features
Internally Fixed Threshold 1.2V to 5V in 0.1V Step High Accuracy 1.5% Low Supply Current 3A No External Components Required Quick Reset within 20s Built-in Recovery Delay Include 0ms, 55ms, 220ms, 450ms Options 800ns Glitch Immunity of Manual Reset Input Low Functional Supply Voltage 0.9V CMOS Push-Pull Output Small SC-82 and SOT-143 Packages RoHS Compliant and 100% Lead (Pb)-Free
Applications
Computers Controllers Intelligent Instruments Critical P and C Power Monitoring Portable/Battery-Powered Equipment
Ordering Information
RT9817 Package Type H : SOT-143 Y : SC-82 Operating Temperature Range P : Pb Free with Commercial Standard G : Green (Halogen Free with Commercial Standard) Threshold Voltage 12 : 1.2V 13 : 1.3V : 49 : 4.9V 50 : 5.0V Reset Active Timeout Period A = 0ms (RESET) B = 55ms (RESET) C = 220ms (RESET) D = 450ms (RESET) E = 0ms (RESET) F = 55ms (RESET) G = 220ms (RESET) H = 450ms (RESET)
Pin Configurations
(TOP VIEW)
VDD 4 1 GND MR 3 2 RESET/ RESET
VDD 4 1 GND
MR 3 2 RESET/ RESET
SOT-143
SC-82
Note : There is no pin1 indicator on top mark for SC-82 and SOT-143 types, and pin 1 will be lower left pin when reading top mark from left to right. Pin2 of SC-82 and Pin1 of SOT143 is wider than other pins in each package.
Note : RichTek Pb-free and Green products are : RoHS compliant and compatible with the current requirements of IPC/JEDEC J-STD-020. Suitable for use in SnPb or Pb-free soldering processes. 100%matte tin (Sn) plating. DS9817-07 August 2007 www.richtek.com 1
Marking Information
For marking information, contact our sales representative directly or through a RichTek distributor located in your area, otherwise visit our website for detail.
RT9817
Typical Application Circuit
VDD up RESET/ RESET RT9817 GND RESET/ RESET VDD MR
Functional Pin Description
Pin Name GND RESET RESET
MR
Pin Function Ground Pin Active Low Push-Pull Reset Output Active High Push-Pull Reset Output Manual Reset Power Pin
VDD
Function Block Diagram
VDD MR VDD
P MOS VSET Threshold Voltage Setting POR Power On Reset CMP Timer N MOS
RESET/ RESET
www.richtek.com 2
DS9817-07 August 2007
RT9817
Absolute Maximum Ratings
(Note 1) Terminal Voltage (with Respect to GND) VDD ------------------------------------------------------------------------------------------------------------------------ -0.3V to 6.0V All Other Inputs -------------------------------------------------------------------------------------------------------- -0.3V to VDD+0.3V Input Current, IVDD ----------------------------------------------------------------------------------------------------- 20mA Power Dissipation, PD @ TA = 25C SC-82 -------------------------------------------------------------------------------------------------------------------- 0.25W SOT-143 ----------------------------------------------------------------------------------------------------------------- 0.285W Package Thermal Resistance (Note 4) SC-82, JA --------------------------------------------------------------------------------------------------------------- 400C SOT-143, JA ------------------------------------------------------------------------------------------------------------ 350C Lead Temperature (Soldering, 10sec.) ---------------------------------------------------------------------------- 260C Storage Temperature Range ---------------------------------------------------------------------------------------- -65C to 125C ESD Susceptibility (Note 2) HBM (Human Body Mode) ------------------------------------------------------------------------------------------ 2kV MM (Machine Mode) -------------------------------------------------------------------------------------------------- 200V
Recommended Operating Conditions
(Note 3)
Junction Temperature Range ---------------------------------------------------------------------------------------- -40C to 125C Ambient Temperature Range ---------------------------------------------------------------------------------------- -40C to 85C
Electrical Characteristics
(VDD = 3V, TA = 25C, unless otherwise specified)
Parameter Operating V DD (VOUT) Range Supply Current Reset Threshold Threshold Voltage Accuracy Threshold Voltage Hysteresis V DD Drop to Reset Delay RT9817A/E Reset Active Time Out Period RT9817B/F RT9817C/G RT9817D/H
Symbol V DD IDD V TH V TH V HYS tRD
Test Conditions RT9817A/B/C/D RT9817E/F/G/H V TH = 3V , VDD = 4.5V
Min 0.9 1.1 ---1.5 --
Typ --3 1.2 to 5.0 -0.01 VTH 20 0 55 220 450 ----
Max 6 6 8 -+1.5 ---75 297 608 0.4 0.3 0.3
Units V A V % V s ms ms ms ms
Drop = V TH -125mV
---
tRP
VDD 1.02 x V TH
35 143 292
V DD < V TH(MIN) ,ISINK = 3.5mA, V TH 3V RESET Output Voltage Low V OL V DD < V TH(MIN) ,ISINK = 1.2mA, V TH 1.8V V TH(MIN) > V DD > 1V, ISINK = 0.5mA
----
V
To be continued
DS9817-07 August 2007 www.richtek.com 3
RT9817
Parameter Symbol Test Conditions V DD > VTH(MAX) , IS OURCE = 800A, VTH 3V RESET Output Voltage High V OH V DD > VTH(MAX) , IS OURCE = 500A, VTH 1.8V V DD > VTH(MAX) , IS OURCE = 200A, VTH 1.1V V DD > VTH(MAX) ,ISINK = 3.5mA, V TH 3V RESET Output Voltage Low V OL V DD > VTH(MAX) ,ISINK = 1.2mA, V TH 1.8V V DD > VTH(MAX) ,ISINK = 0.5mA, V TH 1.2V 1.1V < V DD < VTH(MIN) , IS OURCE = 200A RESET Output Voltage High V OH 1.8V < V DD < VTH(MIN) , IS OURCE = 500A 3V < VDD < V TH(MIN) , IS OURCE = 800A Min VDD -1.5 0.8 VDD 0.8 VDD ---0.8 VDD 0.8 VDD VDD -1.5 Typ ---------Max ---0.4 0.3 0.3 ---V V V Units
Note 1. Stresses listed as the above "Absolute Maximum Ratings" may cause permanent damage to the device. These are for stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may remain possibility to affect device reliability. Note 2. Devices are ESD sensitive. Handling precaution recommended. Note 3. The device is not guaranteed to function outside its operating conditions. Note 4. JA is measured in the natural convection at T A = 25C on a low effective thermal conductivity test board of JEDEC 51-3 thermal measurement standard.
www.richtek.com 4
DS9817-07 August 2007
RT9817
Typical Operating Characteristics
Nch Driver Output Current vs. VDS
2.4 2
Nch Driver Output Current vs. VDS
60
RT9817A-12 VDD = 1.1V
RT9817C-30 VDD = 2.8V VDD = 2.5V
50
Output Current (mA)
1.6 1.2
Output Current (mA)
40 30
VDD = 2.0V
20 10 0
VDD = 1.0V
0.8 0.4 0 0 0.3 0.6 0.9 1.2 1.5
VDD = 1.5V
0
0.5
1
1.5
2
2.5
3
3.5
VDS (V)
VDS (V)
Nch Driver Output Current vs. VDS
120 100
Output Voltage vs. Input Voltage
7 6
RT9817A-45
RT9817A
Output Current (mA)
Output Voltage (V)
80 60 40 20 0 0 1 2 3 4 5
5 4
VDD = 4.4V = 4.0V = 3.5V = 3.0V = 2.5V = 2.0V = 1.5V
5.0V
3 2 1 0 0 1 2 3 4 5 6
2.9V
3.0V
VDS (V)
Input Voltage (V)
Supply Current vs. Input Voltage
6 5
Supply Current vs. Input Voltage
4
RT9817A-12
RT9817C-30 80C 25C
Supply Current IDD (uA)
Supply Current (uA)
80C
3
4
25C
3 2 1 0 0 1 2 3 4 5 6
2
-30C
1
-30C
0 0 1 2 3 4 5 6
Input Voltage (V)
Input Voltage (V)
DS9817-07 August 2007
www.richtek.com 5
RT9817
Supply Current vs. Input Voltage
4
Power-Down Reset Delay vs. Temperature
15
RT9817A-45 80C
RT9817A-12
Power-Down Reset Delay (us)
Supply Current (uA)
3
12
25C -30C
9
2
VDROP = 200mV VDROP = 150mV
6
1
VDROP = 250mV
3
0 0 1 2 3 4 5 6
0 -50 -25 0 25 50 75 100 125
Input Voltage (V)
Temperature (C)
Power-Down Reset Delay vs. Temperature
45
Power-Down Reset Delay vs. Temperature
45
RT9817C-30
RT9817A-45
Power-Down Reset Delay (us)
35 30 25 20 15 10 5 0 -50 -25 0 25 50 75 100 125
Power-Down Reset Delay (us)
40
40 35 30 25 20 15
VDROP = 200mV VDROP = 150mV
VDROP = 200mV
VDROP = 150mV
VDROP = 250mV
VDROP = 250mV
10 5 0 -50 -25 0 25 50 75 100 125
Temperature (C)
Temperature (C)
Nch Driver Sink Current vs. Input Voltage
40
Nch Driver Sink Current vs. Input Voltage
50
RT9817C-30, VDS = 0.5V
RT9817A-45, VDS = 0.5V -30C
Sink Current I SINK (mA)
30
Sink Current I SINK (mA)
-30C 25C
40
25C
30
20
80C
20
80C
10
10
0 0 0.5 1 1.5 2 2.5 3 3.5
0 0 1 2 3 4 5
Input Voltage (V)
Input Voltage (V)
www.richtek.com 6
DS9817-07 August 2007
RT9817
Reset Threshold Deviation vs. Temperature
6.00
Pch Driver Output Current vs. Input Voltage
25
RT9817 5.0V
RT9817C-30 VDS = 2.1V
Reset Threshold Deviation (V)
5.00
20
Output Current (mA)
4.5V
4.00
4.2V
VDS = 1.5V
15
VDS = 1.0V
10
3.00
2.2V
2.00
5
VDS = 0.5V
1.2V
1.00 -50 -25 0 25 50 75 100 125
0 0 1 2 3 4 5 6
Temperature (C)
Input Voltage (V)
Power-Up Reset Time-Out vs. Temperature
500
Power-Up Reset Time-Out vs. Temperature
100
RT9817C
RT9817A
Power-Up Reset Time-Out (ms)
400
Power-Up Reset Time-Out (ms)
75
300
VTH = 2.9V
50
VTH = 5.0V VTH = 4.5V
200
VTH = 3.0V
25
100
0 -50 -25 0 25 50 75 100 125
0 -50 -25 0 25 50 75 100 125
Temperature (C)
Temperature (C)
Output Delay Time vs. Load Capacitance
1000
Nch Driver Output Current vs. VDS
160
RT9817G-31
Nch Driver Output Current (mA)
140 120 100 80 60 40 20 0
Output Delay Time (ms)
100
10
VTH = 3.0V
1
VDD = 6.0V = 5.5V = 5.0V = 4.5V = 4.0V = 3.5V
0.1
VTH = 2.9V VTH = 5.0V
0.01 0.0001
0.0010
0.0100
0.1000
1.0000
0
1
2
3
4
5
6
Load Capacitance (uF)
VDS (V)
DS9817-07 August 2007
www.richtek.com 7
RT9817
Nch Driver Output Current vs. Input Voltage
Nch Driver Output Current (mA)1
RT9817G-31 VDS = 0.5V
Power Down Reset Time-Out vs. Temperature
Power Down Reset Time-Out (ms)
500
60 50 40 30 20 10 0
RT9817G-31
400
-30C 25C
300
80C
200
100
0
0
1
2
3
4
5
6
-50
-25
0
25
50
75
100
125
Input Voltage (V)
Temperature (C)
Output Voltage vs. Input Voltage
RT9817G-31
Power-Down Reset Time-Out vs. Temperature
Power-Down Reset Time-Out (us)
30 25 20
7 6
RT9817G-31
Output Voltage (V)
5 4 3 2 1 0 0 1 2 3 4 5 6
VDROP = 200mV
15 10 5 0 -50 -25 0 25 50 75 100 125
VDROP = 150mV
VDROP = 250mV
Input Voltage (V)
Temperature (C)
www.richtek.com 8
DS9817-07 August 2007
RT9817
Application Information
Benefits of Highly Accurate Reset Threshold Most P supervisor ICs have reset threshold voltages between 1% and 1.5% below the value of nominal supply voltages. This ensures a reset will not occur within 1% of the nominal supply, but will occur when the supply is 1.5% below nominal.
DS9817-07 August 2007
www.richtek.com 9
RT9817
Outline Dimension
D e
H L
C
B
b1
b
A e A1
Symbol A A1 B b b1 C D e H L
Dimensions In Millimeters Min 0.800 0.050 1.200 0.300 0.760 2.100 2.800 1.900 0.080 0.210 0.150 0.410 Max 1.200 0.150 1.400 0.520 0.920 2.640 3.040
Dimensions In Inches Min 0.031 0.002 0.047 0.012 0.030 0.083 0.110 0.075 0.003 0.008 0.006 0.016 Max 0.047 0.006 0.055 0.020 0.036 0.104 0.120
SOT-143 Surface Mount Package
www.richtek.com 10
DS9817-07 August 2007
RT9817
D e H L C B
b
b1
A e A1
Symbol A A1 B b b1 C D e H L
Dimensions In Millimeters Min 0.800 0.000 1.150 0.150 0.350 1.800 1.800 1.300 0.080 0.200 0.260 0.460 Max 1.100 0.100 1.350 0.400 0.500 2.450 2.200
Dimensions In Inches Min 0.031 0.000 0.045 0.006 0.014 0.071 0.071 0.051 0.003 0.008 0.010 0.018 Max 0.043 0.004 0.053 0.016 0.020 0.096 0.087
SC-82 Surface Mount Package
Richtek Technology Corporation
Headquarter 5F, No. 20, Taiyuen Street, Chupei City Hsinchu, Taiwan, R.O.C. Tel: (8863)5526789 Fax: (8863)5526611
Richtek Technology Corporation
Taipei Office (Marketing) 8F, No. 137, Lane 235, Paochiao Road, Hsintien City Taipei County, Taiwan, R.O.C. Tel: (8862)89191466 Fax: (8862)89191465 Email: marketing@richtek.com
DS9817-07 August 2007
www.richtek.com 11

▲Up To Search▲

Price & Availability of RT9817C-12PH

	To Download RT9817C-12PH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .