|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
om .c U t4 ee Sh a at .D w w w July 20, '99 No. 3284LTD-1295-2 (NOTE) 1. This document may, w holly or partially, be subject to change w ithout notice. 2. All rights are reserved ; No one is permitted to reproduce or duplicate, in any from, the w hole or part of this document w ithout Hitachi's permission. 3. No one is permitted to explain contents of this document to third parties w ithout Hitachi's permission. 4. Hitachi w ill not be held responsible for any damage to the user that may result from accidents or any other reasons during operation of the user's unit according to this document, any previous reports or oral discussions. 5. Circuitry and other examples described herein are meant merely to indicate the characteristics and performance of Hitachi's products. Hitachi assumes no responsibility for any intellectual property claims or other problems that may result from applications based on the examples described herein. 6. No license is granted by implication or otherw ise under any patents or other rights of any third party or Hitachi, Ltd. 7. LIFE SUPPORT APPLICATIONS : Hitachi's products are not authorized for use in LIFE SUPPORT SYSTEMS. m o .c U t4 e e h S ta a .D w w w SA09Q001-BZA LIQUID CRYSTAL DISPLAY MODULE TECHNICAL DATA om .c U t4 ee Sh a at .D w w w RECORD OF REVISION Date July 20, '99 Sheet No. 3284LTD-1295-2 Page 2-1/1 Summary 2. MECHANICAL DATA (5)Number of Dots : 640 x 3 (R,G,B)(W) x 240 (H) dots 320 x 3 (R,G,B)(W) x 240 (H) dots Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 1-1/1 2. MECHANICAL DATA (1) Part Name (2) Module Size SA09Q001-BZA 104.5(W) mm x 75.4(H) mm x 7.5 max (D) mm (w ith Frontlight and Touch Panel) 0.057(W) mm x 0.211(H) mm 0.077(W) mm x 0.231(H) mm 320 x 3 (R,G,B)(W) x 240 (H) dots 1/242 Reflective Color LCD (negative type) The upper polarizer is glare type 6 O'clock Cold Cathode Fluorescent Lamp (CFL) x 1 ( 35mW) : Frontlight turned off (410mW) : Frontlight turned on (20%) (65g) 3.3V only Resistance type The surface is glare type (3) Dot Size (4) Dot Pitch (5) Number of Dots (6) Duty (7) LCD (8) View ing Direction (9) Frontlight (10) Pow er Consumption (11) Reflectance (12) Weight (13) Pow er Supply Voltage (14) Touch panel (15) Recommended Controller Type No. HD64461 HD64463 SED1354 SED1355 SED1374 Supplier Hitachi Hitachi Epson Epson Epson portrait mode operation Soft w ise Soft w ise Soft w ise Hard w ise Hard w ise Availability Available Available Available Available Available Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 2-1/1 3. ABSOLUTE MAXIMUM RATINGS 3. 1 ELECTRICAL ABSOLUTE MAXIMUM RATINGS OF LCD ITEM Pow er Supply for Logic Contrast Adjustment Voltage Input Voltage Input Current Static Electricity SYMBOL VDD VCON Vi Ii MIN 0 0 -0.3 0 MAX 4.0 VDD VDD+0.3 1 (8) VSS=0V UNIT V V V A kV Note 2 Note 1 COMMENT Note 1 DISP*OFF, FLM, CL1, CL2, D0D8 Note 2 200pF-250, 25C-70%RH, The Surface of metal bezel and LCD panel are subjected. 3. 2 ELECTRICAL ABSOLUTE MAXIMUM RATINGS OF TOUCH PANEL ITEM Input Voltage Input Current SYMBOL VTi ITi MIN MAX 7 25 UNIT V mA COMMENT 3. 3 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS OPERATING ITEM MIN Ambient Temperature Humidity Vibration 5C MAX 40C Note 1 2.45 m/s 2 (0.25G) 29.4 m/s 2 (3G) MIN -20C MAX 60C Note 1 Note 2, 3 Without condensation STORAGE COMMENT Shock Corrosive Gas Note 1 Note 2 Note 3 Note 4 Note 5 Note 6 - - 11.76 m/s 2 Note 4 (1.2G) Note 5 490 m/s 2 XYZ directions (50G) Note 5 Not Acceptable Not Acceptable Ta<40C : 85%RH max. Ta>40C : Absolute humidity must be low er than the humidity of 85%RH at 40C. Ta at -20C ---------- <48h, at 60C ---------- <168h Background color changes slightly depending on ambient temperature. This phenomenon is reversible. 5Hz100Hz (Except resonance frequency) This module should be operated normally after finishing the test. The response time w ill be slow er at 5C. Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 3-1/1 4. ELECTRICAL CHARACTERISTICS 4. 1 ELECTRICAL CHARACTERISTICS OF LCD ITEM Pow er Supply Voltage Contrast Adjustment Voltage (Note 1) Input Voltage for Logic Circuits (Note 2) Pow er Supply Current (Note 3) Input Leak Current Iin (Note2) Contrast Adjustment Voltage (Note 5) Frame Frequency (Note 6) (Note 1) (Note 2) (Note 3) (Note 4) (Note 5) Vin=VDDorVSS Ta= 5C, =0 Vcon Ta=25C, =0 Ta=40C, =0 fFLM (1.4) 70 (2.1) 100 SYMBOL VDD VCON Vi "L" level IDD Icon(Note4) VDD-VSS=3.3V Vcon=1VDD 0 10 0.2VDD (20) 10 5.0 (2.8) 120 Hz V mA A CONDITION VDD-VSS=3.3V "H" level MIN 3.15 1 0.8VDD VSS=0V TYP 3.30 MAX 3.45 VDD VDD V UNIT V V In proportion as the VCON voltage increase the brightness w ill increase. DISP OFF, FLM, CL1, CL2, D0D8 fFLM=100Hz, Ta=25C, Display pattern:Checker pattern. VCON fFLM=100Hz, Duty=1/242 The Contrast Adjustment Voltage is specified as (2.10.4)V under the condition w hen an optimum contrast is obtained by peak contrast. (Note 6) Need to make sure of flickering and rippling of display w hen setting the Frame Frequency in your set. Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 4-1/3 4. 2 ELECTRICAL CHARACTERISTICS OF FRONTLIGHT ITEM Lamp Voltage Frequency Lamp Curren (Note 7) Starting discharge Voltage SYMBOL VL fL IL VS (Note 2) MIN (50) (0.7) (1000) TYP (380) (60) (1) MAX (2.5) UNIT Vrms kHz mA Vrms Ta=25C Ta=5C NOTE Ta=25C (Note 1) Please design your lamp driving circuit (inverter) according to the above specifications, and inform Hitachi of it. (Note 2) Starting discharge voltage is increased w hen LCM is operating at low er temperature. Please check the characteristics of your inverter before applying to your set. (Note 3) Average life time of CFL w ill be decreased w hen LCM is operating at low er temperature. (Note 4) Under low er driving frequency of an inverter, a certain backlight system (CFL & CFL reflection sheet) may generate a sound noise. Before designing the inverter, please consider the driving frequency and the noise. (Note 5) When ICFL is used over 5.0mA, it may cause uneven contrast near CFL location, due to heat dispersion from CFL. (Note 6) Under low er temperature, please check CFL characteristics on your inverter. (Note 7) H.V A INV GND Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 4-2/3 4.3 ELECTRICAL CHARACTERISTICS OF TOUCH PANEL 4.3.1 OPERATING CONDITION ITEM Operating Voltage Operating Current SPECIFICATION 7VDC 1025mA 4.3.2 ELECTRICAL CHARACTERISTICS ITEM Resistance betw een terminal Insulance Resistance Linearity Y Chattering 1.5% max 10msec max X1-X2 Y1-Y2 X-Y X SPECIFICATION 0.41k 0.20.6k 20M min 1.5% max Operating Voltage 25VDC Measuring every 10mm NOTE (Note 1) MECHANICAL CHARACTERISTICS ITEM Pen input pressure Surface hardness SPECIFICATION 80g max 2H min NOTE R0.8, Stylus pen JIS K 5400 Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 4-3/3 5. OPTICAL CHARACTERISTICS 5.1 OPTICAL CHARACTERISTICS OF LCD ITEM Reflectance View ing angle SYMBOL R 2-1 CONDITION =0, =0 =0, K>2.0 =90, K>2.0 =0, =0 (F/L:turned off) =0, =0 (F/L:turned on) =0, =0 MIN Ta=25C (Frontlight On) TYP (20) (60) (60) (5.0) (4.0) (350) MAX deg ms 1),4),6), 7) 5) UNIT % NOTE 1) 2),3) Contrast ratio Response time (rise+fall) K tr+tf (Measurement condition : Hitachi standard) Note 2)7) : See next page. Note 1. Definition of Reflectance R Light source LCM or SWB BLCM BSWB R= BLCM : Brightness of LCM at optimum voltage. (displaying w hite pattern) BSWB : Brightness of SWB. SWB : Standard w hite board. Sensor Circular hole Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 5-1/3 Note 2. Definition of and (Normal) View ing direction Z 1 y (=180) Note 4. Definition of contrast "K" K= 2 B1 Brightness on selected area (B1) Brightness on non-selected area (B2) (B1) (Di="H") =0 (B2) (Di="L") B2 Operation voltage X y' (=0) Note 3. Definition of view ing angle 1 and 2 K 1<0<2 X' Light source LCM 2.0 Sensor 1 2 Circular hole Sensor : BM-5 or correspondence equipment Note 5. Definition of optical response time Contrast ratio K vs view ing angle Non-selective state selective state Non-selective state 10% 90% tr Rise time Fall time tf Note 6. Hitachi w ill not do 100% inspection for minimum value. Minimum value is for reference. Note 7. Hitachi w ill do sampling inspection for minimum value. Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 5-2/3 5.2 OPTICAL CHARACTERISTICS OF FRONTLIGHT WITH TOUCH PANEL ITEM Brightness Rise Time MIN (10) TYP (15) 5 MAX UNIT cd/m2 Minute NOTE IL=1.0mA Note 1),2) IL=1.0mA Note 1) Brightness 80% (Measurement condition : Hitachi standard) (Note 1) Ta=25C Display data should be all "ON" The LCD driving voltage should be adjusted at the voltage w here the optimum contrast is obtained, w hen set pattern is all "Q". (Note 2) Measurement after 10 minutes from CFL operating. Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 5-3/3 6. BLOCK DIAGRAM CN1 FLM CL1 CL2 DISP*OFF Buffer Timing Circuit Timing Circuit M DISP*OFF Column driv ing circuit Buffer D7~D0 X1 LCD PANEL X240 VDD VSS VCON Pow er Supply Circuit CN2 DIG Y1 DIG X1 DIG Y2 DIG X2 TOUCH PANEL CN3 VCFL VSS CFL Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 6-1/1 7. INTERFACE TIMING CHART 7.1 TIMING CHART T CL1 CL2 Dummy data X1 X2 D7 R Y1 B Y9 G Y953 D6 G R B Y954 Y 2 Y10 D1 R B G Y959 Y 7 Y15 D0 G R B Y960 Y 8 Y16 FLM (Reduction) CL1 (240+n) x T FLM Note(1) D0~D7 X1 X2 X239 X240 Dummy data Note(1) The interval of CL1 pulse must be same including the vertical blanking period. Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 7-1/5 7.2 INTERFACE TIMING SPECIFICATION ITEM CL1 pulse w idth "H" Clock cycle time CL2 pulse w idth Clock set up time Clock hold time Clock rise fall time Data set up time Data hold time "FLM" set up time "FLM" hold time VDD=3.30.15V, VSS=0V, Vcon=1.0~VDD, Ta=+5C~+40C SYMBOL TYP MAX MIN UNIT tWHCL1 tCYC tWCL2 tSCL1 tHCL1 tr, tf tDSU tDH tFS tFH 20 20 100 50 100 60 30 40 80 30 ns ns ns ns ns ns ns ns ns ns tFH tFS FLM tWHCL1 tr CL1 tWHCL2 tSCL1 tf tHCL1 tWCL2 tr CL2 tDSU tf tCYC tDH DO~D7 0.9VDD 0.1VDD 0.8VDD 0.2VDD MEASUREMENT POINT 0.8VDD 0.2VDD 0.9VDD 0.1VDD Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 7-2/5 7.3 POWER ON / OFF SEQUENCE tDLD 0.95xVDD VDD tCH 0.8xVDD CL1 tDLCr VCON tDLCs 0.8xVDD 0.2xVDD tLDH tLOr tLOr tDLCs 0.8xVDD 0.2xVDD tLDH tDLCf tCH 0.8xVDD tDLD DISP*OFF SYMBOL tDLD tCH tLDH tDOr tDOf tDLCr tDLCf tDLCs MIN 200 0 0 MAX UNIT ms ms ms COMMENT (Note 1) 100 100 0 0 20 ns ns ms ms ms (Note 2) (Note 1) Please keep the specified sequence because w rong sequence may cause permanent damage to the LCD panel. (Note 2) Hitachi recommends you to use DISP*OFF function. Display quality may deteriorate if you don't use DISP*OFF function. Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 7-3/5 7.4 POWER SUPPLY FOR LCM R1 Stabilized +3.3V + C1 R2 VSS VR VCON VCFL CFL LCM + VDD C2 - +3.3V VSS Note 1 : R1+VR+R2 < 10k Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 7-4/5 7.5 INPUT DATA ALLOCATION TABLE Data Signal DDDDDDDD 76543210 1 2 34 5 67 8 D 7 DDD 654 ----- DDDD 4321 9 5 6 G G G G G 99 55 78 B B B B B R R R R R 9 5 9 G G G G G D 0 9 6 0 B B B B B Y X 1 2 3 4 5 9 10 11 12 ----- R R R R R G G G G G B B B B B R R R R R G G G G G B B B B B R R R R R G G G G G B B B B B R R R R R G G G G G B B B B B --------------------- 138 139 140 141 142 143 144 145 R R R R R R R R G G G G G G G G B B B B B B B B R R R R R R R R G G G G G G G G B B B B B B B B R R R R R R R R G G G G G G G G B B B B B B B B R R R R R R R R G G G G G G G G B B B B B B B B --------------------------------- G G G G G G G G B B B B B B B B R R R R R R R R G G G G G G G G B B B B B B B B 238 239 240 RGB RGB RGB R R R GB GB GB RGB RGB RGB RG RG RG B B B ----- G ----- G ----- G BR BR BR GB GB GB R : RED G : GREEN B : BLUE Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 7-5/5 8. INTERNAL PIN CONNECTION CN1 JAE : FA3S026H5 (Suitable FPC t0.30.05mm, 0.5mm pitch) PIN No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 SIGNAL N.C N.C Y1 X1 Y2 X2 VSS VCON VDD DISP*OFF D7 D6 D5 D4 VSS D3 D2 D1 D0 VSS VDD CL2 VSS CL1 VSS FLM H H H L L GND Pow er Supply for Logic Data Shift GND Data Latch GND First Line Marker H/ L Display Data GND LEVEL H/ L Frontlight Frontlight Analog Signal Touch Panel Analog Signal Touch Panel Analog Signal Touch Panel Analog Signal Touch Panel GND Contrast Adjust Pow er Supply for Logic H : ON / L : OFF FUNCTION H/ L Display Data CN3 JST : housing : BHSR-02VS-1 (Suitable Connector : JST SM02B-BHSS-1) contact pin : SBHS-002T-P0.5 SIGNAL VCFL VSS LEVEL FUNCTION Pow er Supply for CFL GND for CFL PIN No. 1 2 Displays, Date July 20, '99 Hitachi, Ltd. Sh. No. 3284LTD - 1295 - 2 Page 8-1/1 |
Price & Availability of SA09Q001BZA |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |