 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LOW POWER CONSUMPTION SILICON MMIC AMPLIFIER FEATURES * LOW POWER CONSUMPTION: 15 mW (VCC = 3.4 V, ICC = 4.5 mA) * HIGH POWER GAIN: 20 dB (UPC2715T) * WIDE FREQUENCY RESPONSE: 2 GHz (UPC2714T) * INTERNAL CURRENT REGULATION MINIMIZES GAIN CHANGE OVER TEMPERATURE * SUPER SMALL PACKAGE * TAPE AND REEL PACKAGING OPTION AVAILABLE 0 0 0.5 1.0 15 UPC2714T UPC2715T GAIN vs. FREQUENCY 20 UPC2715 Gain, GS (dB) 10 UPC2714 5 1.5 2.0 Frequency, f (GHz) DESCRIPTION The UPC2714T and UPC2715T are Silicon Monolithic integrated circuits manufactured using the NESAT III process. These devices are suitable for applications which require low power consumption and wide frequency operation. They are designed for low cost, low power consumption gain stages in cellular radios, GPS receivers, and PCN applications. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. ELECTRICAL CHARACTERISTICS (TA = 25C, f = 0.5 GHz, VCC = 3.4 V) PART NUMBER PACKAGE OUTLINE SYMBOLS ICC GS fU GS PSAT NF RLIN RLOUT ISOL GT RTH PARAMETERS AND CONDITIONS Circuit Current Small Signal Gain Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 0.1 GHz) Gain Flatness, f = 0.1~ 0.6 GHz Saturated Output Power Noise Figure Input Return Loss Output Return Loss Isolation Gain-Temperature Coefficient Thermal Resistance (Junction to Ambient) UNITS mA dB GHz dB dBm dB dB dB dB dB/C C/W 10 5 22 -10 MIN 3.3 8.5 1.4 UPC2714T T06 TYP 4.5 11.5 1.8 1.0 -7 5.0 13 8 27 +0.006 200 6.5 12 5 28 -9 MAX 5.7 15.5 MIN 3.3 16 0.9 UPC2715T T06 TYP 4.5 19 1.2 1.0 -6 4.5 17 8 33 +0.006 200 6.0 MAX 5.7 23 California Eastern Laboratories UPC2714T, UPC2715T ABSOLUTE MAXIMUM RATINGS1 (TA = 25C) SYMBOLS VCC PIN PT TOP TSTG PARAMETERS Supply Voltage Input Power Total Power Dissipation2 Operating Temperature Storage Temperature UNITS V dBm mW C C RATINGS 4.0 -5 200 -40 to +85 -55 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOL VCC PARAMETER Supply Voltage UNITS V MIN 3.06 TYP MAX 3.4 3.74 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on 50 x 50 x 1.6 mm epoxy glass PWB (TA = 85C). TYPICAL PERFORMANCE CURVES (TA = 25C) UPC2714T/UPC2715T CIRCUIT CURRENT vs. VOLTAGE 10 9 UPC2714T/UPC2715T CIRCUIT CURRENT vs. TEMPERATURE 10 VCC = 3.4V Circuit Current, ICC (mA) Circuit Current, ICC (mA) 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 8 6 4 2 -40 0 40 80 Supply Voltage, VCC (V) Temperature, TOP (C) UPC2714T GAIN AND NOISE FIGURE vs. FREQUENCY 30 UPC2715T GAIN AND NOISE FIGURE vs. FREQUENCY 25 VCC = 3.74 V 20 6 VCC = 3.4 V 15 VCC = 3.06 V VCC = 3.06 V 10 5 Gain, GS (dB) Gp 10 VCC = 3.06V 9 7 5 VCC = 3.4V VCC = 3.06V 3 1 VCC = 3.74V NF 0 Gain, GS (dB) VCC = 3.74V 5 VCC = 3.74 V VCC = 3.4 V 0 0.1 0.3 1.0 2.0 4 -10 0.1 0.3 1.0 2.0 Frequency, f (GHz) Frequency, f (GHz) Noise Figure, NF (dB) VCC = 3.4V Noise Figure, NF (dB) 20 UPC2714T, UPC2715T TYPICAL PERFORMANCE CURVES (TA = 25C, VCC = 3.4 V) UPC2714T INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB) Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB) 0 UPC2715T INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY 10 RLout -10 0 RLin -10 -20 RLin -20 RLout -30 -30 -40 0.1 0.3 1.0 2.0 -40 0.1 0.3 1.0 2.0 Frequency, f (GHz) Frequency, f (GHz) UPC2714T ISOLATION vs. FREQUENCY -10 UPC2715T ISOLATION vs. FREQUENCY 0 Isolation, ISOL (dB) -20 Isolation, ISOL (dB) 0.1 0.3 1.0 2.0 -10 -20 -30 -30 -40 -40 0.1 0.3 1.0 2.0 Frequency, f (GHz) Frequency, f (GHz) UPC2714T POWER vs. FREQUENCY 5 5 UPC2715T POWER vs. FREQUENCY 0 X 0 Power (dBm) -5 Power (dBm) X X -5 PSAT -10 X -10 P1dB -15 PSAT -15 P1dB -20 0 0.5 1.0 1.5 2.0 -20 0 0.5 1.0 1.5 2.0 Frequency, f (GHz) X: Typical SSB Third Order Intercept Point Frequency, f (GHz) X: Typical SSB Third Order Intercept Point UPC2714T, UPC2715T TYPICAL PERFORMANCE CURVES (TA = 25C) UPC2714T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 10 VCC = 3.4 V f = 0.5 GHZ UPC2715T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 10 VCC = 3.4 V f = 0.5 GHz Output Power, POUT (dBm) 0 85 C -10 TA = 25C Output Power, POUT (dBm) 0 TA = 85C TA = 25C TA = 40C -10 TA = 40C TA = 85C -20 -20 C -20 -40 C -30 -40 -50 -40 -30 -20 -10 -30 -50 -40 -30 -20 -10 0 Input Power, PIN (dBm) Input Power, PIN (dBm) UPC2714T OUTPUT POWER vs. INPUT POWER AND VOLTAGE 10 f = 0.5 GHZ UPC2715T OUTPUT POWER vs. INPUT POWER AND VOLTAGE f = 0.5 GHZ Output Power, POUT (dBm) 0 3.74 V Output Power, POUT (dBm) 10 3.74 V VCC = 3.4 V 0 -10 VCC = 3.4 V -20 3.06 V -10 3.06 V -20 -30 -40 -50 -40 -30 -20 -10 -30 -50 -40 -30 -20 -10 0 Input Power, PIN (dBm) Input Power, PIN (dBm) NOISE FIGURE vs. FREQUENCY 7 TEST CIRCUIT Noise Figure, NF (dB) 6 VCC 1000 pF UPC2714T 5 UPC2715T 50 C1 1 1000 pF 2, 3, 5 4 1000 pF C3 6 C2 50 OUT IN 4 3 0 0.5 1.0 1.5 2.0 Frequency, f (GHz) UPC2714T, UPC2715T TYPICAL SCATTERING PARAMETERS (TA = UPC2714T VCC = 3.4 V, ICC = 4.5 mA FREQUENCY (GHz) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 2.50 S11 MAG 0.123 0.133 0.139 0.151 0.165 0.176 0.187 0.197 0.205 0.215 0.219 0.225 0.228 0.231 0.231 0.232 0.231 0.229 0.226 0.223 0.216 0.212 0.208 0.204 0.201 ANG -169.9 167.3 150.5 135.1 120.6 105.6 91.5 77.8 64.6 51.9 39.2 28.3 17.3 6.6 -2.8 -12.7 -21.3 -29.4 -38.0 -44.8 -51.3 -57.8 -63.4 -68.2 -72.9 MAG 3.6 3.7 3.7 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.7 2.6 2.5 2.4 2.2 2.1 2.0 1.9 1.8 S21 ANG -6.4 -19.2 -30.6 -41.8 -53.2 -64.7 -76.3 -87.9 -99.5 -111.1 -122.5 -133.8 -145.0 -156.1 -166.8 -177.4 172.2 162.0 151.9 142.3 132.3 122.8 113.7 104.6 95.6 MAG 0.069 0.061 0.056 0.048 0.040 0.035 0.031 0.025 0.024 0.022 0.023 0.024 0.025 0.026 0.028 0.029 0.030 0.032 0.033 0.035 0.036 0.037 0.039 0.040 0.041 S12 ANG -12.0 -24.5 -32.7 -42.9 -48.8 -53.4 -52.7 -51.7 -47.1 -43.5 -38.2 -32.0 -31.8 -31.7 -31.4 -34.1 -36.7 -37.1 -40.2 -41.0 -47.1 -49.4 -52.7 -58.2 -58.7 MAG 0.190 0.266 0.326 0.366 0.394 0.414 0.429 0.436 0.439 0.439 0.432 0.422 0.412 0.400 0.387 0.374 0.359 0.348 0.335 0.322 0.311 0.298 0.287 0.276 0.270 S22 ANG 13.3 8.7 2.9 -4.0 -11.1 -19.4 -27.3 -35.3 -43.2 -50.6 -58.0 -64.8 -71.4 -77.8 -83.4 -88.9 -94.1 -98.5 -103.2 -107.4 -111.5 -115.3 -118.9 -122.2 -125.7 K1 2.04 2.17 2.25 2.49 2.86 3.19 3.55 4.36 4.60 5.08 5.00 4.96 4.97 5.01 4.90 4.97 5.11 5.08 5.20 5.21 5.39 5.57 5.61 5.81 5.97 S21 (dB) 11.2 11.3 11.4 11.5 11.5 11.4 11.4 11.3 11.1 11.0 10.8 10.5 10.2 9.8 9.5 9.1 8.7 8.3 7.9 7.5 7.0 6.6 6.2 5.7 5.3 25C) UPC2715T VCC = 3.4 V, ICC = 4.5 mA FREQUENCY (GHz) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 MAG 0.052 0.087 0.121 0.141 0.159 0.175 0.181 0.184 0.187 0.187 0.186 0.182 0.178 0.173 0.167 0.163 0.157 0.152 0.148 0.142 S11 ANG 33.7 21.3 9.5 -2.1 -12.4 -27.8 -40.7 -52.3 -66.1 -78.4 -89.3 -101.5 -113.8 -125.4 -137.1 -148.4 -160.0 -171.6 176.8 164.7 MAG 7.7 7.8 7.9 7.9 7.9 7.7 7.4 7.2 6.9 6.6 6.3 6.1 5.7 5.3 4.9 4.6 4.2 3.9 3.7 3.4 S21 ANG -8.4 -25.7 -40.9 -55.9 -69.5 -84.9 -98.4 -112.0 -125.6 -138.9 -150.8 -162.7 -174.5 174.3 163.7 153.2 143.1 133.2 123.5 114.5 MAG 0.031 0.028 0.025 0.022 0.020 0.019 0.019 0.019 0.020 0.021 0.022 0.023 0.024 0.025 0.026 0.027 0.028 0.029 0.030 0.031 S12 ANG -7.8 -12.6 -17.8 -20.3 -21.2 -19.7 -15.7 -13.3 -12.3 -11.2 -11.6 -12.1 -14.5 -16.3 -18.3 -20.6 -22.2 -23.9 -25.6 -27.1 MAG 0.254 0.279 0.311 0.351 0.383 0.409 0.426 0.432 0.432 0.426 0.412 0.394 0.377 0.359 0.343 0.328 0.315 0.306 0.296 0.286 S22 ANG 8.1 3.6 -1.0 -6.4 -13.0 -21.3 -30.2 -39.1 -48.1 -56.3 -64.2 -71.2 -77.5 -83.4 -88.3 -93.1 -97.2 -100.8 -104.7 -108.9 2.07 2.20 2.35 2.54 2.68 2.79 2.82 2.87 2.83 2.85 2.87 2.93 3.06 3.22 3.35 3.53 3.72 3.90 4.07 4.28 K1 S21 (dB) 17.7 17.8 17.9 18.0 18.0 17.7 17.4 17.2 16.8 16.4 16.0 15.6 15.0 14.4 13.9 13.2 12.5 11.9 11.3 10.6 Note: 1. K factor calculations: 2 2 2 K = 1 + | | - |S11| - |S22| , = S11 S22 - S21 S12 2 |S12 S21| UPC2714T, UPC2715T EQUIVALENT CIRCUIT VCC LEAD CONNECTIONS (Top View) (Bottom View) OUT C1K 3 4 4 3 2 IN 5 5 2 * 1. 2. 3. 4. 5. 6. 1 6 6 1 GND INPUT GND GND OUTPUT GND VCC Note: Package Markings: C1K - UPC2714T C1L - UPC2715T *Used in UPC2714T only OUTLINE DIMENSIONS (Units in mm) UPC2714T/UPC2715T PACKAGE OUTLINE T06 +0.2 2.8 -0.3 +0.2 1.5 -0.1 RECOMMENDED P.C.B. LAYOUT (Units in mm) 3.10 3 4 0.95 2 5 2.90.2 3 0.95 4 1 1.90.2 2 0.95 6 0.5 MIN 5 1 6 -0.05 0.3 +0.10 1.0 MIN 1.0 MIN +0.2 1.1 -0.1 0.8 0 to 0.1 0.130.1 Note: All dimensions are typical unless otherwise noted. ORDERING INFORMATION PART NUMBER UPC2714T-E3 UPC2715T-E3 Embossed Tape, 8 mm wide. Pins 1, 2, 3 are in tape pull-out direction. QTY 3K/Reel 3K/Reel EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) * Internet: http://WWW.CEL.COM PRINTED IN USA ON RECYCLED PAPER -11/97 DATA SUBJECT TO CHANGE WITHOUT NOTICE |
Price & Availability of UPC2714T-E3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |