 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Intelligent 5 X 7 LED Dot Matrix Display Controller Featuring Toshiba's exclusive Constant Current technology. The TB62713F is an intelligent, Constant Current, 5 X 7 LED dot matrix display decoder and driver. The stand alone device includes all of the decode, multiplex and driver circuitry necessary to control a 5 X 7 LED matrix. An internal character set includes 128 characters to simplify programming and refresh functions are handled automatically. All display data, including a 16 step brightness control is input via the serial data port. TB62713N SDIP24-P-300-1.78 Weight: 1.62g (Typ.) TB62713F Features * Constant Current row drivers for consistent display SSOP24-P-300-1.00 brightness. * Single device saves labor and board space. * 128 character internal character set simplifies design efforts. * Automatically handles multiplex and display refresh tasks. * 16 step programmable brightness control. * Available in thru hole and surface mount packages. * Data out cascade connection port. Performance Characteristics VDD = 4.5V~5.5V Column source output: -17V / 350mA Row select output: 17V / 0-50mA Max transition frequency: 15MHz Weight: 0.32g (Typ.) Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Block Diagram Maximum Ratings: CHARACTERISTICS Supply Voltage LED Supply Voltage Source Output Current Columns 0~4 Row Drive Current Rows 0~6 Output Current Input Voltage Clock Frequency Total Output Current Power Dissipation TB62713N SYMBOL VDD VCC ICO IRO IOH/IOL VIN FCLK IVDD RATING 7.0 17.0 -420.0 60.0 +/-5.0 -0.3 ~ VDD ~+0.3 15.0 420.0 1.78 UNIT volts volts mA mA mA volts MHz mA Pd TB62713F Topr Tstg 0.62 -40 ~ +85 -55 ~+150 W Operation Temperature Storage Temperature C C Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Recommended Operating Condition: CHARACTERISTICS SYMBOL TEST CIRCUIT CONDITION MIN. TYP. MAX. UNIT Output Stage Set normal operation mode Rext=590, Out R0~R6, all on VCC = 5V, Ta=25C Set normal operation mode Rext=590, Out R0~R6, all on VCC = 12V, Ta=25C Normal operation mode VDD=4.5 - 5.5V All off mode, VCC=17V All off mode, VCE=17V Normal operation, VCE=.7V, Rext=590, Normal operation mode IOUT-cn = -350mA ICC1 Supply Current ICC2 Column C0~C4 Frequency Scanning 1 -- 370 -- mA 1 -- 390 -- mA fOSC ILEAK1 ILEAK2 IRO VOUT 2 4 4 3 5 300 -- -- 36.5 3.0 600 -- -- 43 -- 1200 -20 20 49.4 -- Hz A mA A V Col. C0~C4 Leakage Current Row R0~R6 Leakage Current Row R0~R6 Sink Current Col. C0~C4 Leakage Voltage Logic IDD1 Supply Current IDD2 Operating Supply Current High Level Input Current Low Level Output Current High Level Output Voltage VOH2 VOL1 Low Level Output Voltage VOL2 Clock Frequency FCLK IDD3 IIH IIL VOH1 6 6 6 -- -- 6 6 6 6 6 Standby Mode, Ta=25C Blank Mode, Ta=25C Normal operating mode fCLK=10MHz, Ta=25C Data-in:Rows R0~R6 on Data-in, Load&Clock VIN=5V Data-in, Load&Clock VIN=0V Data out, IOH=-1mA Data-out, IOH=-1A Data out, IOL=-1mA Data-out, IOL=-1A Cascade connected -- -- -- -- -- 4.6 -- -- -- 10 -- -- -- -- -- -- VDD -- 0.1 -- 200 12.5 20.5 1 -1 -- -- 0.4 -- -- A mA mA A A V V V V MHz Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Switching Characteristics: CHARACTERISTICS Data Hold Time (D-IN Clock) Data Set-up Time (D-IN Clock) Serial Output Delay High Level Pulse Width Of Clock Low Level Pulse Width Of Clock Pulse Width Of Load Setup Time (Clock-Load) Setup Time (Load-Clock) Col. C0~C6 Propagation Delay (Load-Outn) Col. C0~C6 Rise Time (OUTn) Col. C0~C6 Fall Time (OUTn) Row R0 ~ R4 Propagation Delay (Load-Rn) Row R0~R4 Rise Time (Rn) Row R0~R4 Fall Time (Rn) SYMBOL tDHO tDST tPDSO tCLKH tCLKL tw LD tCLK-LD tLD-CLK tPDCO tr CO tf CO tPDRO tr RO tf RO CL=10pf CL=10pf CL=10pf CL=10pf CL=10pf CL=10pf CL=10pf CONDITION MIN. -- -- -- -- -- -- -- -- -- 0.2 0.2 -- 0.4 0.4 TYP. 10 20 25 30 30 100 50 50 -- 1.0 1.0 -- 2.0 2.0 MAX. -- -- -- -- -- -- -- -- 5.0 -- -- 10.0 -- -- UNIT ns ns ns ns ns ns ns ns s s s s s s Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Recommended Operating Conditions: CHARACTERISTICS SYMBOL CONDITION MIN. TYP. MAX. UNIT Output Stage Supply Voltage Column C0~C6 Output Current Row R0~R4 Output Current Logic Supply Voltage High Level Input Current Low Level Input Current High Level Input Voltage Low Level Input Voltage Switching Condition Data Hold Time (D-IN Clock) Data Setup Time (D-IN Clock) Propagation Delay (Clock D-Out) High Level Pulse Width Of Clock Low Level Pulse Width Of Clock Pulse Width Of Load Setup Time (Clock-Load) Setup Time (Load-Clock) tDHO tDST tPDSO tCLKH tCLKL twLD tCLKLD tLDCLK CL=10pf 30 50 50 30 30 150 100 100 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ns ns ns ns ns ns ns ns VDD IIH IIL VIH VIL Data-In, Load&Clock,VIN=VDD Data-In, Load&Clock,VIN=0V 4.5 -- -- 0.7 VDD -- -- -- -- -- -- 5.5 1 -1 -- 0.3 VDD V A A V V VCC ICO IRO VCE=0.7V VOUT=3.0V 4.0 -- -- -- -- -- 15.0 50 -280 V mA mA Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Terminal Description: PIN No. 1 2 3 4 5-11 12 13 14 5-17,19,2 18 21 22 23 24 NAME VDD Data IN Clock (CLK) Load (LD) Row R0~R6 P-GND Test In 2 Test In 1 Column C0-C4 VCC Test OUT Rext Data Out (DO) L-GND Logic Supply Voltage Serial Data Input To Shift Register Clock Input Terminal Load Input Terminal Output Terminal to Row Cathodes GND for Row Out Test Terminal - Grounded During Normal Operation Test Terminal - Grounded During Normal Operation Output Terminal to Column Anodes Supply Voltage For LEDs During Normal Operation Leave open Constant Current Programming Terminal Cascade Connection To Next Display Stage Logic & Analog Ground Terminal FUNCTION Timing Diagram: Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Data Input Data is input on the SERIAL-IN terminal. Each 16 bit serial word includes an address (D8 - D15) and data (D0 - D7). A low to high transition load command on the LOAD terminal loads the data into the appropriate registers following the 16th clock pulse. Operation Serial data is input on the DATA-IN terminal beginning with the most significant bit (MSB). Data is clocked through the 16 bit shift register on the rising edge of the clock. A Low to High transition on the LOAD input following the 16th (LSB) bit latches the 16 bit word into the 16 bit D-type latch. Each 16 bit word typically includes 8 address bits and 8 data bits. The first four data bits, beginning with D15 (MSB) ~ D12 select the Action mode (see figure 1). These global commands determine the overall function the device is to perform and includes Blank, Normal Operation, Load Register, All On and Stand-by. Data bits D11~D8 select the particular register to be loaded (see figure 2) should the load register function be selected. Data bits D7~D0 (LSB) define the specific commands required to program the display and define the brightness setting (duty cycle). Figure 1. Action Mode REGISTER DATA FUNCTION Blank (Rows & Columns All Off) Normal Operation Load Register (Duty, Character Data) All On (Col. C0~C4 All On) Stand-By D15 0 0 0 0 0 D14 0 0 0 0 1 D13 0 0 1 1 0 D12 0 1 X 1 0 D11~D8 -- -- X -- -- D7~D4 -- -- X -- -- D3~D0 -- -- X -- X Hex Code 0--- H 1--- H 2 xxx H 3 --- H 4--- H INITIAL STATE "x" indicates that data is required in this field to execute the function. "-" indicates that data in this field is not required and not recognized. California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Action Mode 1. Blank - Constant current segment drivers are off resulting in an all segments off condition. Data D15 ~ D12 are 0. D11~D0 are not relevant in blank mode. (Note: the device draws < 12.5ma in Blank mode.) 2. Normal (Operation) - Instructs device to display data loaded during previous steps. D11~ D0 are not relevant in the Normal Operation mode. 3. Load Register - Directs the device to recognize and load D11~ D0. In this mode D11 ~ D8 determines the specific register to be loaded (see figure 2) and D7 ~ D0 serves as the actual data to be loaded for programming the brightness (duty cycle) or the particular digit. 4. All On - All constant current row drivers are on resulting in an all dots illuminated condition. D11 ~ D0 are not relevant in this mode. 5. Stand By - All display drivers off condition. The Stand-By command turns off all internal bias currents and serves as a low power consumption mode (<.2ma). Used with Stand-By set up commands "All Data Clear" or "Data Not Cleared" (table 7). The initial state, upon power up, is the BLANK state. Application Note: Stand-By and Blank perform similar functions in that the display is totally blank when either command is input. Stand-By provides a low power consumption (<.2ma current draw on VDD) mode by turning off all internal bias currents in the internal driver circuits. The Stand-By command also cuts off the Rext bias current used to regulate the programmed constant current within the device. Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F LOAD REGISTER Mode Figure 2. LOAD REGISTER Mode REGISTER DATA FUNCTION Load Duty Register Load Character Data Register D15~D12 2H 2H D11 0 0 D10 0 0 D9 0 0 D8 0 1 D7~D4 X X D3~D0 X X Hex Code 20XXH 21XXH "x" indicates that data is required in this field to execute the function. "-" indicates that data in this field is not required and not recognized. Selects the specific register to be loaded. The LOAD REGISTER mode is enabled by the Load Register Action mode command (see Figure 1 - Action mode). 1. Duty Register - Enables the device to accept duty cycle (brightness) setting. (see table 3 Duty Cycle control register). Sixteen brightness steps (0/16 to 15/16) are available. 2. Character Data Register - Enables the device to accept the data to program the 5 X 7 matrix character as encoded in D7~D0. Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Brightness Control Brightness is controlled by controlling the "on time" duty cycle. The device allows for 16 brightness as illustrated in list 3 with 0/16 as the dimmest setting (not illuminated) to 15/16 as the brightest setting. The duty cycle control register is addressed with a 20 Hex command at D15~D8 and the appropriate data per list 3 at D3~D0. D7~D4 are not recognized by the duty cycle register. The initial state, upon power up is 15/16, or full brightness. REGISTER DATA DUTY CYCLE 0/16 1/16 2/16 3/16 4/16 5/16 6/16 7/16 8/16 9/16 10/16 11/16 12/16 13/16 14/16 15/16 D15~D8 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H 20H D7~D4 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- D3 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D2 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 Hex Code 20X0H 20X1H 20X2H 20X3H 20X4H 20X5H 20X6H 20X7H 20X8H 20X9H 20XAH 20XBH 20XCH 20XDH 20XEH 20XFH INITIAL STATE "x" indicates that data is required in this field to execute the function. "-" indicates that data in this field is not required and not recognized. California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F STAND-BY Commands Two STAND-BY commands are available as illustrated in Table 7. STAND-BY / NO DATA CLEAR places the device in a power save mode (see application note - ACTION Mode section) while leaving data intact in the various registers. This mode is enabled by a 4 Hex command at D15~D12 and 0 Hex at D3~D0. D11~D4 are not relevant in the STAND-BY / NO DATA CLEAR Mode. STAND-BY / DATA CLEAR also places the device in a power save mode and clears data in the various registers leaving registers in their initial state. This mode is enabled by a 4 Hex command at D15~D12 and 1 Hex at D3~D0. D11~D4 are not relevant in the STAND-BY / NO DATA CLEAR Mode. REGISTER DATA D15~D8 Stand-By (No Data Clear) Stand-By (Clear Data) 4-H 4-H D7~D4 -- -- D3 0 0 D2 0 0 D1 0 0 D0 0 1 Hex Code 4XX0H 4XX1H " x" indicates that data is required in this field to execute the function. "-" indicates that data in this field is not required and not recognized. Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Operation example. The following example begins with a blank display. Step 1 sets the brightness setting to maximum brightness (15/16 duty cycle). The next step instructs the device to display the character A. Step 4 instructs the device to display the character B. The next four steps (steps 5 - 8) display the characters C,D,E and F in sequence, all at full brightness. Step 9 blanks but does not clear the display and step 10 reprograms the brightness to half (8/16 duty cycle) brightness. Step 11 again displays the character F at half brightness. Step 12 again blanks the device and step 13 programs the character G. Step 14 instructs the device to display the character G (still at the half brightness setting) and step 15 clears and blanks the display. STEP 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 D15~D12 -- 0010 0010 0001 0010 0010 0010 0010 0010 0000 0010 0001 0000 0010 0001 0100 D11~D8 -- 0000 0001 XXXX 0001 0001 0001 0001 0000 XXXX 0000 XXXX XXXX 0000 XXXX XXXX D7~D4 -- XXXX 0100 XXXX 0100 0100 0100 0100 0100 XXXX XXXX XXXX XXXX 0100 XXXX XXXX D3~D0 -- 1111 0011 XXXX 0010 0011 0100 0101 0110 XXXX 1000 XXXX XXXX 0111 XXXX 0000 OUTPUT R0~R6 Off Off Off Off On On On On On Off Off On Off Off On Off OUTPUT C0~C4 Off Off Off On On On On On On Off Off On Off Off On Off MODE Initial State (Clear Mode) Duty=15/16 Character Data = A Normal Character Data = B Character Data = C Character Data = D Character Data = E Character Data = F Blank Duty=8/16 Normal Blank Character Data = G Normal Stand-By (Shut Down) DISPLAY INDICATION All Blank All Blank All Blank A B C D E F All Blank All Blank F - Half Brightness All Blank All Blank G - Half Brightness All Blank Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F State Movement Diagram Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Character Generator List Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Character Generator List Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Test Circuit: Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Test Circuit: Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Test Circuit: Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Graphs: Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB62713N/F Outline Drawings: Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 California Sales Office: 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Web: www.marktechopto.com | Email: info@marktechopto.com Fax: 714.850.9314 All specifications subject to change. For up-to-date product info visit our web site at www.marktechopto.com |
Price & Availability of TB62713N
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |