 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| P-CHANNEL 30V - 0.14 - 3A SOT23-6L STripFETTM II POWER MOSFET TYPE STT3PF30L s s STT3PF30L VDSS 30 V RDS(on) <0.165 ID 3A s TYPICAL RDS(on) = 0.14 STANDARD OUTLINE FOR EASY AUTOMATED SURFACE MOUNT ASSEMBLY LOW THRESHOLD DRIVE DESCRIPTION This Power MOSFET is the latest development of STMicroelectronis unique "Single Feature SizeTM" strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. APPLICATIONS s DC MOTOR DRIVE s DC-DC CONVERTERS s BATTERY MANAGEMENT IN NOMADIC EQUIPMENT s POWER MANAGEMENT IN PORTABLE/DESKTOP PCs s CELLULAR SOT23-6L INTERNAL SCHEMATIC DIAGRAM MARKING s STA3 ABSOLUTE MAXIMUM RATINGS Symbol VDS VDGR VGS ID ID IDM(*) Parameter Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 k) Gate- source Voltage Drain Current (continuous) at TC = 25C Drain Current (continuous) at TC = 100C Drain Current (pulsed) Value 30 30 16 2.4 1.5 10 1.6 Unit V V V A A A W Total Dissipation at TC = 25C Ptot (*) Pulse width limited by safe operating area. September 2002 . Note: P-CHANNEL MOSFET actual polarity of voltages and current has to be reversed 1/8 STT3PF30L THERMAL DATA Rthj-amb Rthj-amb Tj Tstg (*)Thermal Resistance Junction-ambient (**)Thermal Resistance Junction-ambient Max. Operating Junction Temperature Storage Temperature Max Max 78 156 -55 to 150 -55 to 150 C/W C/W C C (*) Mounted on a 1 inch pad of 2 oz. Cu in FR-4 board (**) Mounted on a minimum pad of 2 oz. Cu in FR-4 board ELECTRICAL CHARACTERISTICS (Tcase = 25 C unless otherwise specified) OFF Symbol V(BR)DSS IDSS IGSS Parameter Drain-source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Test Conditions ID = 250 A, VGS = 0 VDS = Max Rating VDS = Max Rating TC = 125C VGS = 16 V Min. 30 1 10 100 Typ. Max. Unit V A A nA ON (*) Symbol VGS(th) RDS(on) Parameter Gate Threshold Voltage Static Drain-source On Resistance Test Conditions VDS = VGS VGS = 10 V VGS = 4.5 V ID = 250 A ID = 1.5 A ID = 1.5 A Min. 1 Typ. 1.6 0.14 0.16 Max. 2.5 0.165 0.2 Unit V DYNAMIC Symbol gfs (*) Ciss Coss Crss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions VDS=25 V ID = 1.5 A Min. Typ. 4 420 95 30 Max. Unit S pF pF pF VDS = 25V f = 1 MHz, VGS = 0 2/8 STT3PF30L ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol td(on) tr Qg Qgs Qgd Parameter Turn-on Delay Time Rise Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions ID = 1.5 A VDD = 15 V RG = 4.7 VGS = 4.5 V (Resistive Load, Figure 1) VDD= 24V ID= 3A VGS=4.5V (see test circuit, Figure 2) Min. Typ. 14.5 37 4.8 1.7 2 7 Max. Unit ns ns nC nC nC SWITCHING OFF Symbol td(off) tf Parameter Turn-off Delay Time Fall Time Test Conditions ID = 1.5 A VDD = 15 V RG = 4.7, VGS = 4.5 V (Resistive Load, Figure 1) Min. Typ. 90 23 Max. Unit ns ns SOURCE DRAIN DIODE Symbol ISD ISDM (*) VSD (*) trr Qrr IRRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 3 A VGS = 0 35 25 1.5 Test Conditions Min. Typ. Max. 3 12 1.2 Unit A A V ns nC A di/dt = 100A/s ISD = 3 A VDD = 15 V Tj = 150C (see test circuit, Figure 3) (*)Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. (*)Pulse width limited by safe operating area. Safe Operating Area Thermal Impedance 3/8 STT3PF30L Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations 4/8 STT3PF30L Normalized Gate Threshold Voltage vs Temperature Normalized on Resistance vs Temperature Source-drain Diode Forward Characteristics 5/8 STT3PF30L Fig. 1: Switching Times Test Circuits For Resistive Load Fig. 2: Gate Charge test Circuit Fig. 3: Test Circuit For Diode Recovery Behaviour 6/8 STT3PF30L SOT23-6L MECHANICAL DATA mm MIN. A A1 A2 b C D E E1 L e e1 0.90 0.00 0.90 0.25 0.09 2.80 2.60 1.50 0.35 0.95 1.90 TYP. MAX. 1.45 0.15 1.30 0.50 0.20 3.10 3.00 1.75 0.55 MIN. 0.035 0.000 0.035 0.010 0.004 0.110 0.102 0.059 0.014 0.037 0.075 mils TYP. MAX. 0.057 0.006 0.051 0.020 0.008 0.122 0.118 0.069 0.022 DIM. A A2 A1 b e1 e c L E D E1 7/8 STT3PF30L Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is registered trademark of STMicroelectronics (R) 2002 STMicroelectronics - All Rights Reserved All other names are the property of their respective owners. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 8/8 |
Price & Availability of STT3PF30L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |