 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STGP7NC60HD STGF7NC60HD - STGB7NC60HD N-CHANNEL 14A - 600V - TO-220/TO-220FP/DPAK Very Fast PowerMESHTM IGBT Table 1: General Features TYPE STGP7NC60HD STGF7NC60HD STGB7NC60HD s s s Figure 1: Package IC @100C 14 A 6A 14 A 3 1 2 VCES 600 V 600 V 600 V VCE(sat) (Max) @25C < 2.5 V < 2.5 V < 2.5 V s s s s LOWER ON-VOLTAGE DROP (Vcesat) OFF LOSSES INCLUDE TAIL CURRENT LOSSES INCLUDE DIODE RECOVERY ENERGY LOWER CRES/CIES RATIO HIGH FREQUENCY OPERATION UP TO 70 KHz VERY SOFT ULTRA FAST RECOVERY ANTI PARALLEL DIODE NEW GENERATION PRODUCTS WITH TIGHTER PARAMETER DISTRIBUTION 3 1 2 TO-220 TO-220FP 3 1 D2PAK Figure 2: Internal Schematic Diagram DESCRIPTION Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESHTM IGBTs, with outstanding performances. The suffix "H" identifies a family optimized for high frequency applications in order to achieve very high switching performances (reduced tfall) mantaining a low voltage drop. APPLICATIONS HIGH FREQUENCY INVERTERS s SMPS AND PFC IN BOTH HARD SWITCH AND RESONANT TOPOLOGIES s MOTOR DRIVERS s Table 2: Order Code PART NUMBER STGP7NC60HD STGF7NC60HD STGB7NC60HDT4 MARKING GP7NC60HD GF7NC60HD GB7NC60HD PACKAGE TO-220 TO-220FP D2PAK PACKAGING TUBE TUBE TAPE & REEL Rev.9 June 2005 1/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD Table 3: Absolute Maximum ratings Symbol Parameter Value STGP7NC60HD STGB7NC60HD VCES VECR VGE IC IC ICM ( ) IF PTOT VISO Tstg Tj Collector-Emitter Voltage (VGS = 0) Emitter-Collector Voltage Gate-Emitter Voltage Collector Current (continuous) at TC = 25C (#) Collector Current (continuous) at TC = 100C (#) Collector Current (pulsed) Diode RMS Forward Current at TC = 25C Total Dissipation at TC = 25C Derating Factor Insulation Withstand Voltage A.C.(t = 1 sec; Tc = 25C) Storage Temperature Operating Junction Temperature 80 0.64 -- 55 to 150 25 14 50 20 25 0.20 2500 600 20 20 10 6 STGF7NC60HD V V V A A A A W W/C V C Unit ( ) Pulse width limited by max. junction temperature. Table 4: Thermal Data Min. Rthj-case Thermal Resistance Junction-case TO-220 DPAK TO-220FP Rthj-amb TL Thermal Resistance Junction-ambient Maximum Lead Temperature for Soldering Purpose (1.6 mm from case, for 10 sec.) 300 Typ. Max. 1.56 5.0 62.5 C/W C/W C/W C ELECTRICAL CHARACTERISTICS (TCASE =25C UNLESS OTHERWISE SPECIFIED) Table 5: Main Parameters Symbol VBR(CES) ICES IGES VGE(th) VCE(sat) Parameter Collector-Emitter Breakdown Voltage Collector cut-off Current (VGE = 0) Gate-Emitter Leakage Current (VCE = 0) Gate Threshold Voltage Collector-Emitter Saturation Voltage Test Conditions IC = 1 mA, VGE = 0 VCE = Max Rating, TC = 25 C VCE = Max Rating, TC = 125 C VGE = 20V , VCE = 0 VCE = VGE, IC = 250 A VGE = 15V, IC = 7 A VGE = 15V, IC = 7 A, Tc= 125C 3.75 1.85 1.7 Min. 600 10 1 100 5.75 2.5 Typ. Max. Unit V A mA nA V V V (#) Calculated according to the iterative formula: T -T JMAX C I ( T ) = ------------------------------------------------------------------------------------------------CC R xV (T , I ) THJ - C CESAT ( M AX ) C C 2/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD ELECTRICAL CHARACTERISTICS (CONTINUED) Table 6: Dynamic Symbol gfs (1) Cies Coes Cres Qg Qge Qgc ICL Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Emitter Charge Gate-Collector Charge Turn-Off SOA Minimum Current VCE = 390 V, IC = 7 A, VGE = 15 V (see Figure 22) Vclamp = 480 V , Tj = 150C RG = 10 , VGE = 15 V 50 Test Conditions VCE = 15 V , IC = 7 A VCE = 25 V, f= 1 MHz, VGE = 0 Min. Typ. 4.30 720 81 17 35 7 16 48 Max. Unit S pF pF pF nC nC nC A (1) Pulsed: Pulse duration= 300 s, duty cycle 1.5% Table 7: Switching On Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on Parameter Turn-on Delay Time Current Rise Time Turn-on Current Slope Turn-on Delay Time Current Rise Time Turn-on Current Slope Test Conditions VCC = 390 V, IC = 7 A RG= 10 , VGE= 15V, Tj= 25C (see Figure 19) VCC = 390 V, IC = 7 A RG= 10 , VGE= 15V, Tj= 125C (see Figure 20) Min. Typ. 18.5 8.5 1060 18.5 7 1000 Max. Unit ns ns A/s ns ns A/s Table 8: Switching Off Symbol tr(Voff) td(off) tf tr(Voff) td(off) tf Parameter Off Voltage Rise Time Turn-off Delay Time Current Fall Time Off Voltage Rise Time Turn-off Delay Time Current Fall Time Test Conditions Vcc = 390 V, IC = 7 A, RG = 10 , VGE = 15 V TJ = 25 C (see Figure 20) Vcc = 390 V, IC = 7 A, RG = 10 , VGE = 15 V Tj = 125 C (see Figure 20) Min. Typ. 27 72 60 56 116 105 Max. Unit ns ns ns ns ns ns Table 9: Switching Energy Symbol Eon (2) Eoff (3) Ets Eon (2) Eoff (3) Ets Parameter Turn-on Switching Losses Turn-off Switching Loss Total Switching Loss Turn-on Switching Losses Turn-off Switching Loss Total Switching Loss Test Conditions VCC = 390 V, IC = 7 A RG= 10 , VGE= 15V, Tj= 25C (see Figure 19) VCC = 390 V, IC = 7 A RG= 10 , VGE= 15V, Tj= 125C (see Figure 20) Min. Typ. 95 115 210 140 215 355 Max 125 150 275 Unit J J J J J J (2) Eon is the turn-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a package with a co-pack diode, the co-pack diode is used as external diode. IGBTs & DIODE are at the same temperature (25C and 125C) (3) Turn-off losses include also the tail of the collector current. 3/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD Table 10: Collector-Emitter Diode Symbol Parameter Test Condiction Min. Typ. Max. 1.9 Unit Vf trr ta Qrr Irrm S trr ta Qrr Irrm S Forward On-Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Softness factor of the diode Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Softness factor of the diode If = 3.5 A If = 3.5 A, Tj = 125 C If = 7 A, VR = 40 V, Tj = 25 C, di/dt = 100 A/s 1.3 1.1 37 22 40 2.1 0.68 61 34 98 3.2 0.79 V V ns ns nC A If = 7 A, VR = 40 V, Tj = 125 C, di/dt = 100 A/s ns ns nC A 4/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD Figure 3: Output Characteristics Figure 6: Transfer Characteristics Figure 4: Transconductance Figure 7: Collector-Emitter On Voltage vs Temperature Figure 5: Collector-Emitter On Voltage vs Collector Current Figure 8: Normalized Gate Threshold vs Temperature 5/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD Figure 9: Normalized Breakdown Voltage vs Temperature Figure 12: Gate Charge vs Gate-Emitter Voltage Figure 10: Capacitance Variations Figure 13: Total Switching Losses vs Temperature Figure 11: Total Switching Losses vs Gate Resistance Figure 14: Total Switching Losses vs Collector Current 6/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD Figure 15: Thermal Impedance For TO-220/ DPAK Figure 17: Turn-Off SOA Figure 16: Thermal Impedance For TO-220FP Figure 18: Characteristics Emitter-Collector Diode 7/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD Figure 19: Ic vs Frequency For a fast IGBT suitable for high frequency applications, the typical collector current vs. maximum operating frequency curve is reported. That frequency is defined as follows: fMAX = (PD - PC) / (EON + EOFF) 1) The maximum power dissipation is limited by maximum junction to case thermal resistance: PD = T / RTHJ-C considering T = TJ - TC = 125 C- 75 C = 50C 2) The conduction losses are: PC = IC * VCE(SAT) * with 50% of duty cycle, VCESAT typical value @125C. 3) Power dissipation during ON & OFF commutations is due to the switching frequency: PSW = (EON + EOFF) * freq. 4) Typical values @ 125C for switching losses are used (test conditions: VCE = 390V, VGE = 15V, RG = 3.3 Ohm). Furthermore, diode recovery energy is included in the EON (see note 2), while the tail of the collector current is included in the EOFF measurements (see note 3). 8/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD Figure 20: Test Circuit for Inductive Load Switching Figure 22: Gate Charge Test Circuit Figure 21: Switching Waveforms Figure 23: Diode Recovery Time Waveforms 9/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 10/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 D F G1 H F2 L2 L5 E 123 L4 G 11/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD TO-263 (D 2PAK) MECHANICAL DATA mm. DIM. MIN. A A1 b b2 c c2 D D1 E e H L L1 L2 L4 V2 13.10 1.30 1.15 1.27 2.70 0 4.32 0.00 0.71 1.15 0.46 1.22 8.89 8.01 10.04 2.54 13.70 1.70 1.39 1.77 3.10 8 0.515 0.051 0.045 0.050 0.106 0 10.28 9.02 TYP MAX. 4.57 0.25 0.91 1.40 0.61 1.40 9.40 MIN. 0.178 0.00 0.028 0.045 0.018 0.048 0.350 0.315 0.395 0.010 0.540 0.067 0.054 0.069 0.122 8 0.404 0.355 TYP. MAX. 0.180 0.009 0.350 0.055 0.024 0.055 0.370 inch 12/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0795 0.960 3.937 1.197 BULK QTY 1000 1.039 0.520 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 0.35 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. 0.413 0.618 0.059 0.062 0.065 0.449 0.189 0.153 0.468 0.075 1.574 0.0098 0.0137 0.933 0.956 MAX. 0.421 0.626 0.063 0.063 0.073 0.456 0.197 0.161 0.476 0.082 BASE QTY 1000 * on sales type 13/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD Table 11: Revision History Date 07-Jun-2004 19-Aug-2004 17-Sep-2004 09-Nov-2004 19-Jan-2005 09-Jun-2005 Revision 4 5 6 7 8 9 9 Description of Changes Stylesheet update. No content change Complete Version Figure 18 has been added Final datasheet Datasheet updated Modified title 14/15 STGP7NC60HD - STGF7NC60HD - STGB7NC60HD Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners (c) 2005 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 15/15 |
Price & Availability of STGP7NC60HD
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |