View SGC-2363Z_1308138.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Preliminary Information Product Description
Sirenza Microdevices' SGC-2363Z is a high performance SiGe HBT MMIC amplifier utilizing a Darlington configuration with a patented active-bias network. The active bias network provides stable current over temperature and process Beta variations. Designed to run directly from a 3V supply, the SGC-2363Z does not require a dropping resistor as compared to typical Darlington amplifiers. The SGC-2363Z is designed for high linearity 3V gain block applications that require small size and minimal external components. It is internally matched to 50 ohms. The matte tin finish on Sirenza's lead-free "Z" package is applied using a post annealing process to mitigate tin whisker formation and is RoHS compliant per EU Directive 2002/95. The package body is manufactured with green molding compounds that contain no antimony trioxide or halogenated fire retardants.
Gain & Return Loss
20 S21 15
SGC-2363Z
Pb
RoHS Compliant & Green Package
50-4000 MHz Silicon Germanium Cascadable Gain Block
VD = 3V, ID = 26mA (Typ.)
0
S22
10 S11 5 Bias Tee Data, ZS = ZL = 50 Ohms, TL = 25C 0 0 1 2 3 4
-20
Return Loss (dB)
-10
Gain (dB)
Product Features * Single Fixed 3V Supply * Supply Dropping Resistor not required * Patented Self-Bias Circuitry * P1dB = 9.8 dBm at 1950 MHz * IP3 = 23.5 dBm at 1950 MHz * Robust 1000V ESD, Class 1C HBM Applications * PA Driver Amplifier * Cellular, PCS, GSM, UMTS * IF Amplifier * Wireless Data, Satellite
Frequency 850 MHz 1950 MHz 2400 MHz 850 MHz 1950 MHz 2400 MHz 850 MHz 1950 MHz 2400 MHz 1950 MHz 1950 MHz 1930 MHz Min. Typ. 17.4 13.6 12.3 10.4 9.8 9.6 22.9 23.5 23.8 17.9 14.3 3.7 3 22
OIP3 Tone Spacing = 1MHz Pout per tone = -5 dBm
-30
-40
Frequency (GHz)
Symbol G
Parameters Small Signal Gain
Units dB
Max.
P1dB
Output Power at 1dB Compression
dBm
OIP3 IRL ORL NF VD ID Rth, j-l
Output Third Order Intercept Point Input Return Loss Output Return Loss Noise Figure Device Operating Voltage Device Operating Current Thermal Resistance (junction to lead)
VD = 3.0V Bias Tee Data ID = 26mA Typ. TL = 25C
dBm dB dB dB V mA C/W
ZS = ZL = 50 Ohms
26 255
30
Test Conditions:
The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2005 Sirenza Microdevices, Inc.. All worldwide rights reserved.
303 S. Technology Ct. Broomfield, CO 80021
Phone: (800) SMI-MMIC 1
http://www.sirenza.com
EDS-104973 Rev A
Preliminary Information SGC-2363Z 0.05-4.0 GHz Cascadeable MMIC Amplifier
Typical RF Performance at Key Operating Frequencies (Bias Tee)
Symbol G OIP3 P1dB IRL ORL S12 NF Parameter Small Signal Gain Output Third Order Intercept Point Output Power at 1dB Compression Input Return Loss Output Return Loss Reverse Isolation Noise Figure
VD = 3V TL = 25C ID = 26mA Typ. ZS = ZL = 50 Ohms
Unit dB dBm dBm dB dB dB dB 23.6 22.4 20.5 2.9 100 18.4 500 18.1 23.3 11.0 19.0 18.4 21.6 3.0
Frequency (MHz) 850 17.4 22.9 10.4 18.0 16.7 22.2 3.3 1950 13.6 23.5 9.8 17.9 14.3 20.5 3.7 2400 12.3 23.8 9.6 16.3 13.0 19.9 3.9 3500 9.8 22.1 8.3 14.2 12.5 18.9 4.7
Test Conditions:
OIP3 Tone Spacing = 1MHz, Pout per tone = -5 dBm
Typical Performance with Bias Tee, VD = 3V, ID = 26mA (Typ.)
OIP3 vs. Frequency (25C)
28
15
P1dB vs. Frequency (25C)
26
13
OIP3 (dBm)
P1dB (dBm)
24
11
22
9
20
7
18 500
1000
1500
2000
2500
3000
3500
5 500
1000
1500
2000
2500
3000
3500
Frequency (MHz)
Frequency (MHz)
Absolute Maximum Ratings
Parameter Max Device Current (ICE) Max Device Voltage (VCE) Max. RF Input Power* (See Note) Max. Junction Temp. (TJ) Operating Temp. Range (TL) Max. Storage Temp. *Note: Load condition, ZL = 50 Ohms Absolute Limit 55 mA 4.5 V +18 dBm +150C -40C to +85C +150C
Reliability & Qualification Information Parameter ESD Rating - Human Body Model (HBM) Moisture Sensitivity Level www.sirenza.com Rating Class 1C MSL 1
This product qualification report can be downloaded at
Caution: ESD sensitive
Appropriate precautions in handling, packaging and testing devices must be observed.
Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: TL=TLEAD IDVD < (TJ - TL) / RTH, j-l
303 S. Technology Ct. Broomfield, CO 80021 Phone: (800) SMI-MMIC 2 http://www.sirenza.com
EDS-104973 Rev A
Preliminary Information SGC-2363Z 0.05-4.0 GHz Cascadeable MMIC Amplifier
Typical Performance with Bias Tee, VD = 3V, ID = 26mA (Typ.)
Noise Figure vs. Frequency (25C)
5
35 40
DCIV vs. Temperature
+25C -40C
4
30 25
+85C
Id (mA)
0 500 1000 1500 2000 2500 3000 3500
3
NF (dB)
20 15 10
2
1
5
0
0 0 0.5 1 1.5 2 2.5 3 3.5 4
Frequency (GHz)
Vd (V)
|S11| vs. Frequency 0 -5 S11 (dB) -10 -15 -20 -25 -30 0 1 2 Frequency (GHz) 3 4
S11_25C
|S21| vs. Frequency
20 16 12
Gain (dB)
8
S21_25C
4 0 0 1 2 3 4
Frequency (GHz)
|S22| vs. Frequency
|S12| vs. Frequency
0 -5 -10 -15 -20 -25 -30 0 1 2 3 4
S12_25C
0 -5 -10 S22 (dB) -15 -20
S12 (dB)
S22_25C
-25 -30 0 1
Frequency (GHz)
2 Frequency (GHz)
3
4
303 S. Technology Ct. Broomfield, CO 80021
Phone: (800) SMI-MMIC 3
http://www.sirenza.com
EDS-104973 Rev A
Preliminary Information SGC-2363Z 0.05-4.0 GHz Cascadeable MMIC Amplifier Basic Application Circuit
Vs
Application Circuit Schematic
Application Circuit Element Values
Reference Designator 100-2000MHz 2000-4000MHz
1uF
1000pF
C3 L1
C1 C2 C3
1000pF 100pF 100pF 150nH
2.7pF 6.8pF 6.8pF 39nH
1,2 RF IN C1 3
SGC-2363Z
L1
6 C2
RF OUT
Mounting Instructions
1. Use a large ground pad area under device pins 1, 2, 4 and 5 with many plated through-holes as shown. 2. We recommend 1 or 2 ounce copper. Measurements for this data sheet were made on a 31 mil thick FR-4 board with 1 ounce copper on both sides.
4,5
1uF 1000pF C3 L1 C1 C2
Part Identification Marking & Pinout
6
5
4
C23
1 2 3
Pin #
Function
Description
3
RF IN
RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation Connection to ground. Use via holes as close to the device ground leads as possible to reduce ground inductance and achieve optimum RF performance
Part Number SGC-2363Z Package / Lead Composition Lead Free, RoHs Compliant Reel Size 7" Devices / Reel 3000
1,2,4,5
GND
6
RF output and bias pin. This pin requires the use of an RF OUT / external DC blocking capacitor chosen for the frequency of DC BIAS operation.
Phone: (800) SMI-MMIC 4 http://www.sirenza.com
EDS-104973 Rev A
303 S. Technology Ct. Broomfield, CO 80021
Preliminary Information SGC-2363Z 0.05-4.0 GHz Cascadeable MMIC Amplifier
SOT-363 PCB Pad Layout
Dimensions in inches [millimeters]
RF OUT RF IN
Notes: 1. Provide a large ground pad area under device pins 1, 2, 4, & 5 with many plated via holes as shown. 2. Dimensions given for 50 Ohm RF I/O lines are for 31 mil thick Getek. Scale accordingly for different board thicknesses and dielectric contants. 3. We recommend 1 or 2 ounce copper. Measurements for this data sheet were made on a 31 mil thick Getek with 1 ounce copper on both sides.
SOT-363 Nominal Package Dimensions
Dimensions in inches [millimeters] A link to the SOT-363 package outline drawing with full dimensions and tolerances may be found on the product web page at www.sirenza.com.
303 S. Technology Ct. Broomfield, CO 80021
Phone: (800) SMI-MMIC 5
http://www.sirenza.com
EDS-104973 Rev A

▲Up To Search▲

Price & Availability of SGC-2363Z

	To Download SGC-2363Z Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .