|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
OM1320SMM OM1320NMM OM1320NKM OM1320NTM OM1320STM OM1320N2M 1.5 AMP POSITIVE ADJUSTABLE VOLTAGE REGULATOR APPROVED TO DESC DRAWING 7703401 Three Terminal, Precision Adjustable Positive Voltage Regulator In Hermetic Style Packages (LM117) Please see mechanical outlines herein FEATURES * * * * * Similar To Industry Standard LM117 Approved To DESC Standardized Military Drawing Number 7703401 Built In Thermal Overload Protection Short Circuit Current Limiting Available In Six Package Styles DESCRIPTION These three terminal positive regulators are supplied in hermetically sealed packages. All protective features are designed into the circuit, including thermal shutdown, current-limiting, and safe-area control. With heat sinking, these devices can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5 amps. The unit also features output voltages that can be fixed from 1.2 volts to 37 volts using external resistors. ABSOLUTE MAXIMUM RATINGS Tc @ 25C Power Dissipation Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55C to + 150C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to + 150C Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300C Thermal Resistance, Junction to Case: Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17C/W Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2C/W Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5C/W Case Y, TO-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0C/W Maximum Output Current: Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 A Recommended Operating Conditions: Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2 to 37 VDC Ambient Operating Temperature Range (TA). . . . . . . . . . . . . . . . - 55C to + 125C Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.25 to 41.25 VDC 3.5 4 11 R2 Supersedes 1 07 R1 3.5 - 1 OM1320NTM, OM1320STM, OM1320NKM, OM1320SMM, OM1320NMM, OM1320N2M ELECTRICAL CHARACTERISTICS -55C TA 125C, IL = 8mA (unless otherwise specified) OM1320NTM, OM1320STM, OM1320NKM, OM1320SMM, OM1320NMM Parameter Reference Voltage Symbol VREF Test Conditions VDIFF = 3.0V, TA = 25C VDIFF = 3.3V VDIFF = 40V Line Regulation (Note 1) Load Regulation (Note 1) RLOAD RLINE 3.0V VDIFF 40V, Vout = Vref, TA = 25C 3.3V VDIFF 40V, Vout = Vref VDIFF = 3.0V, 10mA IL 1.5A, TA = 25C VDIFF = 3.3V, 10mA IL 1.5A VDIFF = 40V, 10mA IL 300mA, TA = 25C VDIFF = 40V, 10mA IL 195mA Thermal Regulation VRTH Vin = 14.6V, IL = 1.5A Pd = 20 Watts, t = 20 ms, TA =25C Ripple Rejection (Note 2) Adjustment Pin Current IAdj RN f = 120 Hz, Vout = Vref CAdj = 10 F VDIFF = 3.0V, TA = 25C VDIFF = 3.3V VDIFF = 40V Adjustment Pin Current Change IAdj VDIFF = 3.0V, 10mA IL 1.5A, TA = 25C VDIFF = 3.3V, 10mA IL 1.5A VDIFF = 40V, 10mA IL 300mA, TA = 25C VDIFF = 40V, 10mA IL 195mA 3.0V VDIFF 40V, TA = 25C 3.3V VDIFF 40V Miminum Load Current ILmin VDIFF = 3.0V, VOUT = 1.4V (forced) VDIFF = 3.3V, VOUT = 1.4V (forced) VDIFF = 40V, VOUT = 1.4V (forced) Current Limit (Note 2) ICL VDIFF = 15V VDIFF = 40V, TA = 25C 100 Min. 1.20 Max. 1.30 1.30 1.30 9 23 15 15 15 15 16 mV mV mV V Unit * * * * * 1.20 1.20 -9 -23 -15 -15 -15 -15 -16 * 66 dB * * -5 100 100 5 5 5 5 5 5 5.0 A * * * * * * * -5 -5 -5 -5 -5 A 5.0 5.0 1.5 0.18 3.5 1.5 mA A Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The * denotes the specifications which apply over the full operating temperature range. 3.5 7703401M 7703401U 7703401T 7703401Y 7703401N 77034012 PART NUMBER DESIGNATOR Standard Military Drawing Number Omnirel Part Number OM1320SMM OM1320STM OM1320NTM OM1320 NKM OM1320NMM OM1320N2M Omnirel Package Designation SMD-3 TO-257 (Isolated) TO-257 (non-Isolated) TO-3 SMD-1 LCC-20 3.5 - 2 OM1320NTM, OM1320STM, OM1320NKM, OM1320SMM, OM1320NMM, OM1320N2M ELECTRICAL CHARACTERISTICS OM1320N2M Parameter Reference Voltage Symbol VREF -55C TA 125C, IL = 8mA (unless otherwise specified) Test Conditions VDIFF = 3.0V, TA = 25C VDIFF = 3.3V VDIFF = 40V Min. 1.20 Max. 1.30 1.30 1.30 9 23 15 15 15 15 16 mV mV mV V Unit * * * * * 1.20 1.20 -9 -23 -15 -15 -15 -15 -16 Line Regulation (Note 1) Load Regulation (Note 1) RLINE 3.0V VDIFF 40V, Vout = Vref, TA = 25C 3.3V VDIFF 40V, Vout = Vref RLOAD VDIFF = 3.0V, 10mA IL .5A, TA = 25C VDIFF = 3.3V, 10mA IL .5A VDIFF = 40V, 10mA IL 150mA, TA = 25C VDIFF = 40V, 10mA IL 100mA Thermal Regulation VRTH Vin = 14.6V, IL = 300mA Pd = 4 Watts, t = 20 ms, TA =25C Ripple Rejection (Note 2) Adjustment Pin Current RN f = 120 Hz, Vout = Vref CAdj = 10 F * 66 dB IAdj VDIFF = 3.0V, TA = 25C VDIFF = 3.3V VDIFF = 40V 100 * * -5 100 100 5 5 5 5 5 5 5.0 A Adjustment Pin Current Change IAdj VDIFF = 3.0V, 10mA IL .5A, TA = 25C VDIFF = 3.3V, 10mA IL .5A VDIFF = 40V, 10mA IL 150mA, TA = 25C VDIFF = 40V, 10mA IL 100mA 3.0V VDIFF 40V, TA = 25C 3.3V VDIFF 40V * * * * * * * -5 -5 -5 -5 -5 A Miminum Load Current ILmin VDIFF = 3.0V, VOUT = 1.4V (forced) VDIFF = 3.3V, VOUT = 1.4V (forced) VDIFF = 40V, VOUT = 1.4V (forced) 5.0 5.0 .5 0.15 1.65 .065 mA Current Limit (Note 2) ICL VDIFF = 15V VDIFF = 40V, TA = 25C A Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The * denotes the specifications which apply over the full operating temperature range. STANDARD APPLICATION Vin Vout OM1320STM R1 240 IAdj Cin* 0.1 F R2 Adjust Co** 1.0 F * Cin is required if regulator is located an appreciable distance from power supply filter. ** Co is not needed for stability, however it does improve transient response. R Vout = 1.25 V (1 + 2 )+ IAd j R2 R1 Since IAdj is controlled to less than 100 A, the error associated with this term is negligible in most applications. 3.5 3.5 - 3 OM1320NTM, OM1320STM, OM1320NKM, OM1320SMM, OM1320NMM, OM1320N2M MECHANICAL OUTLINE .425 .420 .410 .200 .190 .045 .035 .665 .645 .537 .527 1 .100 .200 3 2 .035 WIDE FLAT 3 PLCS. .425 .150 .140 .350 MIN. 123 .430 .410 .020 .020 .115 .160 .080 .038 MAX. OM1320SMM .750 .500 .005 Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Case - Isolated .035 .025 .100 TYP. .120 TYP. .140 .015 .075 .157 .140 .140 .075 1 2 OM1320STM Isolated Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Tab - Isolated OM1320NTM Non-Isolated Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Tab - Output .415 .030 MIN. 3 .062 .375 OM1320NMM Pin 1 - Adjust Pin 2 - Input Pin 3 - Output 1.53 REF. 0.875 MAX. 0.135 MAX. 0.450 0.250 0.312 MIN. SEATING PLANE 0.043 0.038 2 PLCS. 0.225 0.205 0.161 0.151 0.525 R. MAX. 1.197 1.177 0.675 0.655 0.440 0.420 .065 .020 X45 REF. (.003) .009 R. 20 PLCS. .040 4 .010 0.188 R. MAX. .075 (.010) TYP. 9 .025 TYP. 3 1 19 2 1 .003 .085 .025 SQ. TYP. 18 14 .160 SQ. REF. 13 .050 TYP. .040 X45 REF (3 PL) .050 (.005) TYP. OM1320N2M Pin 1 VOUT(Sense) Pin 2 NC Pin 3 NC Pin 4 NC Pin 5 VIN Pin 6 NC Pin 7 NC Pin 8 NC Pin 9 NC Pin 10 ADJUST Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 NC NC NC NC NC NC NC NC NC VOUT OM1320NKM 3.5 Pin 1 - Adjust Pin 2 - Input Case - Output For additional information please see the mechanical outline section. |
Price & Availability of OM1320STM |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |