View MR27V802FTP_1283303.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

OKI Semiconductor MR27V802F
524,288-Word x 16-Bit or 1,048,576-Word x 8-Bit One Time PROM
FEDR27V802F-01-03
Issue Date: Dec. 8, 2004
GENERAL DESCRIPTION
The MR27V802F is a 8Mbit electrically One Time Programmable Read-Only Memory that can be electrically switched between 524,288-word x 16-bit and 1,048,576-word x 8-bit by the state of the BYTE# pin. The MR27V802F supports high speed asynchronous read operation using a single 3.3V power supply.
FEATURES
* 524,288-word x 16-bit/1,048,576-word x 8-bit electrically switchable configuration * +3.3 V power supply * Access time 70 nS MAX * Operating current 18 mA MAX (5MHz) * Standby current 5 A MAX * Input/Output TTL compatible * Tri-state output * Packages: 44-pin plastic SOP (SOP44-P-600-1.27-K) (Product Name : MR27V802FMA) 48-pin plastic TSOP (TSOP(1)48-P-1220-0.50-1K) (Product Name : MR27V802FTN) 44-pin plastic TSOP (TSOP II 44-P-400-0.80-K) (Product Name : MR27V802FTP)
1/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
PIN CONFIGURATION (TOP VIEW)
A15 A14 NC A18 A17 A7 A6 A5 A4 A3 A2 A1 A0 CE# VSS OE# D0 D8 D1 D9 D2 D10 D3 D11
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25
A16 BYTE#/VPP VSS D15/A-1 D7 D14 D6 D13 D5 D12 D4 VCC D11 D3 D10 D2 D9 D1 D8 D0 OE# VSS CE# A0
NC NC A8 A9 A10 A11 A12 A13 A14 A15 A16 BYTE#/VPP VSS D15/A-1 D7 D14 D6 D13 D5 D12 D4 VCC
A13 A12 A11 A10 A9 A8 NC NC NC NC NC NC NC A18 A17 A7 A6 A5 A4 A3 A2 A1
44-pin SOP 44-pin TSOP(II) Pin name D15/A-1 A0 to A18 D0 to D14 CE# OE# BYTE#/VPP VCC VSS NC
48-pin TSOP(I)
Functions Data output/Address input Address input Data output Chip enable Output enable Mode switch/Program power supply voltage Power supply voltage GND Non connection
2/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
BLOCK DIAGRAM
A-1 x 8/x 16 Switch CE# CE OE# OE BYTE#/VPP PGM
Column Decoder
A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18
Row Decoder
Memory Cell Matrix 524,288 x 16-Bit or 1,048,576x 8-Bit
Address Buffer
Multiplexer
Output Buffer
D0 D1
D2 D3
D4 D5
D6 D7
D8 D9
D10
D12
D14 D15
D11
D13
In 8-bit output mode, these pins are placed in a high-Z state and pin D15 functions as the A-1 address pin.
FUNCTION TABLE
Mode Read (16-Bit) Read (8-Bit) Output disable Standby Program Program inhibit Program verify CE# L L L H L H H OE# L L H H H L BYTE#/VPP H L H L H L 8.0 V VCC D0 to D7 DOUT 3.3 V D8 to D14 DOUT Hi-Z Hi-Z Hi-Z DIN Hi-Z DOUT Hi-Z Hi-Z Hi-Z D15/A-1 L/H L/H L/H L/H
4.0 V
: Don't Care (H or L)
3/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
ABSOLUTE MAXIMUM RATINGS
Parameter Operating temperature under bias Storage temperature Input voltage Output voltage Power supply voltage Program power supply voltage Power dissipation per package Output short circuit current Symbol Ta Tstg VI VO VCC VPP PD IOS Condition -- Value 0 to 70 -55 to 125 -0.5 to VCC+0.5 -0.5 to VCC+0.5 -0.5 to 5 -0.5 to 9.0 1.0 10 Unit C C V V V V W mA
relative to VSS
Ta = 25C --
RECOMMENDED OPERATING CONDITIONS
Parameter VCC power supply voltage VPP power supply voltage Input "H" level Input "L" level Symbol VCC VPP VIH VIL VCC = 3.0 to 3.6 V Condition Min. 3.0 -0.5 2.2 -0.5 Typ. -- -- -- -- Max. 3.6 VCC+0.5 VCC+0.5 0.6 (Ta = 0 to 70C) Unit V V V V
Voltage is relative to VSS. : Vcc+1.5V(Max.) when pulse width of overshoot is less than 10ns. : -1.5V(Min.) when pulse width of undershoot is less than 10ns.
4/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
ELECTRICAL CHARACTERISTICS
DC Characteristics
(VCC = 3.3 V 0.3 V, Ta = 0 to 70C) Typ. Max. Unit -- 5 A -- 5 A -- 5 A -- 1 m -- -- -- -- -- -- 18 10 VCC+0.5 0.6 -- 0.4 mA A V V V V
parameter Input leakage current Output leakage current VCC power supply current (Standby) VCC power supply current (Read) VPP power supply current Input "H" level Input "L" level Output "H" level Output "L" level
Symbol ILI ILO ICCSC ICCST ICCA IPP VIH VIL VOH VOL
Condition VI = 0 to VCC VO = 0 to VCC CE# = VCC CE# = VIH CE# = VIL, OE# = VIH f=5MHz VPP = VCC -- -- IOH = -1 mA IOL = 2 mA
Min. -- -- -- -- -- -- 2.2 -0.5 2.4 --
Voltage is relative to VSS. : Vcc+1.5V(Max.) when pulse width of overshoot is less than 10ns. : -1.5V(Min.) when pulse width of undershoot is less than 10ns.
AC Characteristics
(VCC = 3.3 V 0.3 V, Ta = 0 to 70C) Min. Max. Unit 70 -- ns -- 70 ns -- 70 ns -- 25 ns 0 20 ns 0 20 ns 0 -- ns
Parameter Address cycle time Address access time CE# access time OE# access time Output disable time Output hold time
Symbol tC tACC tCE tOE tCHZ tOHZ tOH
Condition -- CE# = OE# = VIL OE# = VIL CE# = VIL OE# = VIL CE# = VIL CE# = OE# = VIL
Measurement conditions Input signal level ----------------------------------------Input timing reference level---------------------------Output load -----------------------------------------------Output timing reference level -------------------------
0 V/3 V 1/2Vcc 50 pF 1/2Vcc
Output 50 pF (Including scope and jig)
5/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
TIMING CHART (READ CYCLE)
16-Bit Read Mode (BYTE# = VIH)
tC
Address
tC tOH
tCE
CE#
tACC tCHZ
tOE
OE# tACC D0 to D15 Hi-Z
tOH
tOHZ
Valid Data Valid Data Hi-Z
8-Bit Read Mode (BYTE# = VIL)
tC
Address
tC tOH
tCE
CE#
tACC tCHZ
tOE
OE#
tOH
tACC
D0 to D7 Hi-Z Valid Data
tOHZ
Valid Data Hi-Z
6/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
ELECTRICAL CHARACTERISTICS (PROGRAMMING OPERATION)
DC Characteristics
(Ta = 25C 5C) Max. Unit 10 A 50 mA 50 mA VCC+0.5 V 0.8 V -- V 0.45 V 8.25 V 4.1 V
Parameter Input leakage current VPP power supply current (Program) VCC power supply current Input "H" level Input "L" level Output "H" level Output "L" level Program voltage VCC power supply voltage
Symbol ILI IPP2 ICC VIH VIL VOH VOL VPP VCC
Condition VI = VCC+0.5 V CE# = VIL -- -- -- IOH = -400 A IOL = 2.1 mA -- --
Min. -- -- -- 3.0 -0.5 2.4 -- 7.75 3.9
Typ. -- -- -- -- -- -- -- 8.0 4.0
Voltage is relative to VSS. AC Characteristics
(VCC = 4.0 V 0.1 V, BYTE#/VPP = 8.0 V 0.25 V, Ta = 25C 5C) Symbol Condition Min. Typ. Max. Unit tAS -- 100 -- -- ns tOES -- 2 -- -- s tDS -- 100 -- -- ns tAH -- 2 -- -- s tDH -- 100 -- -- ns tOHZ -- 0 -- 100 ns tVS -- 2 -- -- s tPW -- 9 10 11 s tOE -- -- -- 100 ns tAOH -- 0 -- -- ns
Parameter Address set-up time OE# set-up time Data set-up time Address hold time Data hold time Output float delay time from OE# VPP voltage set-up time Program pulse width Data valid from OE# Address hold from OE# high
Pin Check Function Pin Check Function is to check contact between each device-pin and each socket-lead with EPROM programmer. Setting up address as following condition call the preprogrammed codes on device outputs.
(VCC = 3.3 V 0.1 V, CE# = VIL, OE# = VIL, BYTE#/VPP = VIH, Ta = 25C 5C) A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 DATA 0 1 0 VH 0 1 0 1 0 1 0 0 1 00FF 1 0 1 VH 1 0 1 0 1 0 1 1 0 FF00 Other conditions FFFF
A0 0 1
A1 1 0
A2 0 1
A3 1 0
A4 0 1
A5 1 0
: VH = 7.0V 0.25 V
7/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
Consecutive Programming Waveforms
A0 to A18 tAS CE# tPW High OE# tDS D0 to D15 tVS BYTE#/Vpp Din tDH Din tAH
Consecutive Program Verify Waveforms
A0 to A18
CE# tACC OE#
High
tAHO
tOE D0 to D15
tOHZ Dout Dout
BYTE#/Vpp
8.0 V
8/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
Program And Program Verify Cycle Waveforms
A0 to A18 tAS CE# tPW tOES OE# tOHZ D0 to D15 tDS Din tDH tOE tOHZ Dout tAHO
BYTE#/Vpp
8.0 V
Pin Capacitance
(VCC = 3.3 V, Ta = 25C, f = 1 MHz) Typ. Max. Unit -- 8 pF -- 100 -- 10
Parameter Input BYTE#/VPP Output
Symbol CIN1 CIN2 COUT
Condition VI = 0 V VO = 0 V
Min. -- -- --
9/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
Programming/Verify Flow Chart
Programming Start NG Bad Insertion Pin Check PASS Address = First Location Pin Check PASS Address = First Location
Verify Start NG Bad Insertion
VCC = 4.0 V
VCC = 3.0 V/VPP = 3.0 V
VPP = 8.0 V Program 10 s
Verify PASS VCC = 3.6 V/VPP = 3.6 V
NG
Increment Address
NO
Last Address? YES Verify PASS Device Passed X=0 Device Failed NG
Address = First Location
Verify(One Word) PASS Increment Address NO
NG
X = X+1
YES Last Address? YES X = 2? NO Program 10 s
VCC = 3.0 V/VPP = 3.0 V NG
Verify PASS Device Passed
Device Failed
10/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
PACKAGE DIMENSIONS
(Unit: mm)
SOP44-P-600-1.27-K
Mirror finish
5
Notes for Mounting the Surface Mount Type Package
Package material Lead frame material Pin treatment Package weight (g) Rev. No./Last Revised
Epoxy resin 42 alloy Solder plating (5m) 2.10 TYP. 4/Dec. 5, 1996
The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times).
11/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
(Unit: mm)
TSOP(1)48-P-1220-0.50-1K
Mirror finish
5
Notes for Mounting the Surface Mount Type Package
Package material Lead frame material Pin treatment Package weight (g) Rev. No./Last Revised
Epoxy resin 42 alloy Solder plating (5m) 0.55 TYP. 1/Dec. 2, 1999
The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times).
12/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
(Unit: mm)
TSOP(2)44-P-400-0.80-K
Mirror finish
5
Notes for Mounting the Surface Mount Type Package
Package material Lead frame material Pin treatment Package weight (g) Rev. No./Last Revised
Epoxy resin 42 alloy Solder plating (5m) 0.54 TYP. 3/Dec. 10, 1996
The surface mount type packages are very susceptible to heat in reflow mounting and humidity absorbed in storage. Therefore, before you perform reflow mounting, contact Oki's responsible sales person for the product name, package name, pin number, package code and desired mounting conditions (reflow method, temperature and times).
13/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
REVISION HISTORY
Document No. FEDR27V802F-01-01 Date Page Previous Current Edition Edition - 1, 2 4 1, 2 - 1, 2, 11 4 1, 2, 13 Final edition 1 Add MR27V802FMA Add PD condition and IOS = 10mA Add MR27V802FTP Description
Jan. 15, 2004
FEDR27V802F-01-02
Jul. 9, 2004
FEDR27V802F-01-03
Dec. 8, 2004
14/15
FEDR27V802F-01-03
OKI Semiconductor
MR27V802F / OTP
NOTICE 1. The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up-to-date. 2. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the actual circuit, assembly, and program designs. 3. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. 4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. 5. Neither indemnity against nor license of a third party's industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. 6. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not, unless specifically authorized by Oki, authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. 7. Certain products in this document may need government approval before they can be exported to particular countries. The purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and necessary steps at their own expense for these. 8. No part of the contents contained herein may be reprinted or reproduced without our prior permission. Copyright 2004 Oki Electric Industry Co., Ltd.
15/15

▲Up To Search▲

Price & Availability of MR27V802FTP

	To Download MR27V802FTP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .