![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
9.5-12.0 GHZ, 4W Power Amplifier MAAPGM0062 -DIE RO-P-DS-3095 -Preliminary Datasheet Features 4 Watt Saturated Output Power Level MSAGTM Process Proven Manufacturability and Reliability No Airbridges Polyimide Scratch Protection No Hydrogen Poisoning Susceptibility Description The MAAPGM0062-DIE is a 3-stage power amplifier with onchip bias networks. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications. Fabricated using M/A-COM's repeatable, high performance and highly reliable GaAs Multifunction Self-Aligned Gate MESFET Process, each device is 100% RF tested on wafer to ensure performance compliance. M/A-COM's MSAGTM process features robust silicon-like manufacturing processes, planar processing of ion implanted transistors, multiple implant capability enabling power, low-noise, switch and digital FETs on a single chip, and polyimide scratch protection for ease of use with automated manufacturing processes. The use of refractory metals and the absence of platinum in the gate metal formulation prevents hydrogen poisoning when employed in hermetic packaging. Primary Applications Point-to-Point Radar Electrical Characteristics: TB = 40C1, Z0 = 50, VDD = 10V, IDQ = 0.9 A, Pin = 18 dBm Parameter Bandwidth Output Power Power Added Efficiency 1-dB Compression Point Small Signal Gain Input VSWR Output VSWR Gate Supply Current Drain Supply Current 1. 1 TB = MMIC Base Temperature Symbol f POUT PAE P1dB G VSWR VSWR IGG IDD Typical 9.5-12.0 36 33 35 23 1.6:1 1.8:1 < 20 < 1.5 mA A Units GHz dBm % dBm dB M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. 9.5-12.0 GHZ, 4W Power Amplifier MAAPGM0062 -DIE RO-P-DS-3095 -Preliminary Datasheet Maximum Operating Conditions 2 Parameter Input Power Drain Supply Voltage Gate Supply Voltage Quiescent Drain Current (No RF, 40% Idss) Quiescent DC Power Dissipation (No RF) Junction Temperature Storage Temperature Die Attach Temperature Symbol PIN VDD VGG IDQ PDISS TJ TSTG Absolute Maximum 24.0 +12.0 -3.5 1.62 8.5 180 -55 to +150 310 Units dBm V V A W C C C 2. Operation outside of these ranges may reduce product reliability. Operation at other than the typical values may result in performance outside the guaranteed limits. Recommended Operating Conditions Characteristic Drain Supply Voltage Gate Supply Voltage Input Power Junction Temperature Thermal Resistance MMIC Base Temperature Symbol VDD VGG PIN TJ JC TB 9.4 Note 3 Min 8.0 -2.4 Typ 10.0 -2.0 18.0 Max 11.0 -1.5 21.0 150 Unit V V dBm C C/W C 3. Maximum MMIC Base Temperature = 150C -- JC* VDD * IDQ Operating Instructions This device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. Apply VGG = -2 V, VDD= 0 V. 2. Ramp VDD to desired voltage, typically 10 V. 3. Adjust VGG to set IDQ. 4. Set RF input. 5. Power down sequence in reverse. Turn VGG off last. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. 9.5-12.0 GHZ, 4W Power Amplifier MAAPGM0062 -DIE RO-P-DS-3095 -Preliminary Datasheet 40 Gain 9 Input VSWR Output VSWR 50 45 40 35 30 25 8 7 Output Power (dBm) 6 35 30 25 20 15 10 0 2 4 6 8 10 12 14 16 18 20 F=9.5 F=10.0 F=10.5 F=11.0 F=11.5 F=12.0 Gain (dB) 20 15 10 5 0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 5 4 3 2 1 13.0 Frequency (GHz) Figure 1. Small Signal Gain and VSWR vs. Frequency at VDD = 10V. VSWR Input Power (dBm) Figure 2. Output Power vs. Input Power at VDD = 10V. 2.0 1.8 50 45 F=9.5 F=10.0 F=10.5 Power Added Efficiency (%) 1.6 1.4 40 35 30 25 20 15 10 5 0 Drain Current (A) F=11.0 F=11.5 F=12.0 1.2 1.0 F=9.5 0.8 0.6 0.4 0.2 0.0 0 2 4 6 8 10 12 14 16 F=10.0 F=10.5 F=11.0 F=11.5 F=12.0 18 20 0 2 4 6 8 10 12 14 16 18 20 Input Power (dBm) Figure 3. Drain Current vs. Input Power at VDD = 10V. Power In (dBm) Figure 4. PAE vs. Input Power at VDD = 10V. 40 39 38 Po PAE 60 55 28 27 26 Output Power (dBm) 37 36 35 34 33 32 31 30 9.0 9.5 10.0 10.5 11.0 11.5 12.0 45 40 35 30 25 20 15 10 12.5 Power Added Efficiency (%) 50 25 24 Gain (dB) 23 22 21 20 19 18 17 16 15 20 22 24 26 28 30 32 34 36 38 40 F=9.5 F=10.0 F=10.5 F=11.0 F=11.5 F=12.0 Frequency (GHz) Figure 5. Output Power and Power Added Efficiency vs. Frequency at VDD = 10V and Pin = 18 dBm. Output Power (dBm) Figure 6. Compression Curves, Gain vs. Output Power at VDD = 10V. 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. 9.5-12.0 GHZ, 4W Power Amplifier Mechanical Information Chip Size: 4.428 x 4.302 x 0.075 mm 1.343mm. 0.496mm. 0.315mm. 0.184mm. 4.146mm. VGB_T GND :G G DN G : G DN G : GND:G GN D: G MAAPGM0062 -DIE RO-P-DS-3095 -Preliminary Datasheet (174 2.898mm. VGE_T GND:G x 169 x 3 mils) 4.267mm. 4.428mm. 3.800mm. 4.302mm. VD2 G ND :G GN D:G GND:G GN D:G G ND: G G ND :G GND:G VGA_T GN D:G G ND:G G ND:G G ND:G GND :G GND :G GN D:G G ND: G G ND: G GND: G G ND:G G ND: G GND :G GND :G G ND: G G ND: G G ND: G GND:G GND:G GN D:G G ND:G G ND:G G ND: G GND:G G ND:G GND :G GND: G G ND:G GND :G GND :G GND:G GN D: G GN D:G G ND:G GN D:G G ND: G G ND:G G ND:G GN D:G GN D: G G ND: G GN D: G GND:G G ND: G G ND:G GND:G G ND: G GND:G GND: G GND :G GN D:G GND :G GND:G G ND: G GN D:G GND:G GN D:G GN D:G 0.164mm. 0 0 Figure 7. Bond Pad Dimensions Pad RF In and Out DC Drain Supply Voltage VDD DC Gate Supply Voltage VGG 4 Size (m) 200 x 150 150 x 500 150 x 100 Size (mils) 8 x6 6 x 20 6x4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. G DN G : G DN G : G DN G G DN G : : G DN G : G DN G : G DNG : G DNG : G DNG : G DN G : G DN G : 2.152mm. G ND:G G ND:G G ND:G GND :G GND :G G DN G : G DN G : G DN G : G DN G : G DN G : G DNG : G DN G : VGC_T GND: G GND :G VD1 G ND: G G ND:G GND:G G ND: G G ND:G G ND: G G ND:G G ND:G G ND:G GND :G G ND:G G ND: G G ND :G GND :G GND :G GND :G GN D:G G ND: G GND:G GND:G GND:G G ND: G G ND: G 2.152mm. GND :G OUT IN GND:G G DN G : G DN G : G DN G : GND :G GND: G G ND: G G ND:G GND :G GND:G GND:G G ND: G GND: G GND :G G ND: G GND :G GND :G GND :G GND: G GN D:G GND:G GND :G GN D:G GND :G GN D:G GND:G G ND:G GND:G GN D: G GND :G G ND :G GND :G GN D:G GND :G G ND:G G ND:G GN D: G GND :G VGB_B VGC_B VGA_B VD1 GND:G GND:G 0.161mm. GND: G G ND:G VGE_B VD2 GND:G G ND: G .0.315mm. 0.184mm. 2.894mm. 3.822mm. 0.496mm. 1.348mm. 9.5-12.0 GHZ, 4W Power Amplifier MAAPGM0062 -DIE RO-P-DS-3095 -Preliminary Datasheet Figure 8. Recommended bonding diagram for pedestal mount. Assembly Instructions: Die attach: Use AuSn (80/20) 1-2 mil. preform solder. Limit time @ 300 C to less than 5 minutes. Wirebonding: Bond @ 160 C using standard ball or thermal compression wedge bond techniques. For DC pad connections, use either ball or wedge bonds. For best RF performance, use wedge bonds of shortest length, although ball bonds are also acceptable. Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent damage to amplifier. 5 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MAAPGM0062-DIE
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |