View M61314SP_1270248.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MITSUBISHI ICs (MONITOR)
M61314SP
I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY
2
DESCRIPTION
M61314SP is Semiconductor Integrated Circuit for CRT Display Monitor. It includes OSD Blanking,OSD Mixing,Retrace Blanking,Video detector,Sync Sepa ,Wide band Amplifer. Brightness Control, Main/Sub Contrast,OSD level, 4ch D/A OUT,Video response adjust can be controlled by I2C Bus.
PIN CONFIGURATION (TOP VIEW)
GND R IN Vcc 1(12V) G IN SonG IN GND1 B IN GND2 Sync Sepa.OUT Video det.OUT Vcc3(5V) OSD BLK IN OSD R IN OSD G IN OSD B IN GND3 1 2 3 4 5 6 7 8 9
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17
NC(GND) ABL IN R OUT Vcc 2(12V) G OUT GND4 B OUT NC(GND) D/A OUT 4 D/A OUT 3 D/A OUT 2 D/A OUT 1 SCL SDA Clamp pulse IN Ret.BLK IN
FEATURES
Frequency Band Width RGB: 180MHz (3Vp-p at -3dB) OSD: 80MHz Input RGB: 0.7Vp-p(typical) OSD: 3.5V~5V(positive) OSD BLK: 3.5V~5V(positive) Retrace BLK: 2.5V~5V(positive) Clamp Pulse: 2.5V~5V(positive) Output RGB: OSD: Sync OUT: 5Vp-p (at Brightness less than 2V DC) 4Vp-p (at Brightness less than 2V DC) 5Vp-p
10 11 12 13 14 15 16
Package:32P4B
32 pin plastic SDIP
RECOMMENDED OPERATING CONDITIONS
Supply Voltage Range Rated Supply Voltage 11.50V ~ 12.50V (V3,V29) 4.75V ~ 5.25V (V11) 12.00V (V3,V29) 5.00V (V11)
APPLICATION EXAMPLE
CRT Display Monitor
MITSUBISHI ELECTRIC
1
MITSUBISHI ICs (MONITOR)
M61314SP
I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY
2
ABSOLUTE M AXIMUM RATINGS(Ambient temperature 25C)
Parameter Supply voltage(Pin3,29) Supply voltage(Pin11) Power dissipation Ambient temperature Storage temperature Recommend supply 12 Recommend supply 5 Voltage range 12 Voltage range 5 Symbol Vcc12 Vcc5 Pd Topr Tstg Vopr12 Vopr5 Vopr'12 Vopr'5 Rating 13.0 6.0 2358 -20 ~ +75 -40 ~ +150 12.0 5.0 11.5 ~ 12.5 4.75 ~ 5.25 Unit V V mW C C V V V V
THERM AL DERATING
2800 2400 2358 2000 1600 1415 1200 800 400
-25
0
25
50
75
100
125
150
Ambient Temperature Ta (C)
MITSUBISHI ELECTRIC
2
MITSUBISHI ICs (MONITOR)
M61314SP
I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY
2
BLOCK DIAGRAM
MITSUBISHI ELECTRIC
3
MITSUBISHI ICs (MONITOR)
M61314SP
I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY
2
BUS CONTROL TABLE
(1)Slave address:
D7 D6 D5 D4 D3 D2 D1 R/W
1
0
0
0
1
0
0
0
=88H
(2) Slave receiver format: normal mode
8bit
8bit
8bit
S
SLAVE ADDRESS
A
SUB ADDRESS
A
DATA BY TE
A
P
auto increment mode
8bit 8bit
S
SLAVE ADDRESS
A
SUB ADDRESS (0XH)+10H
A
8bit DATA (SUB ADD.=0XH)
A
8bit DATA (SUB ADD.=0(X+1)H)
A
8bit DATA (SUB ADD.=0(X+2)H)
A
S : Start condition A : Acknowledge P : Stop condition
MITSUBISHI ELECTRIC
4
MITSUBISHI ICs (MONITOR)
M61314SP
I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY
2
SDA, SCL CHARACTERISTIC
parameter
min. input LOW voltage max. input HIGH voltage SCL clock frequency. Time the bus must be free before a new transmission can start. Hold time start condition.After this period the first clock pulse is generated.
sy m bol
MIN -0.5 3.0 0 1.3 0.6
MAX 1.5 5.5 400 -
unit V V KHz s s
VIL VIH fSCL tBUF tHD:STA tLOW tHIGH tSU:STA tHD:DAT tSU:DAT tR tF tSU:STO tR, tF
The LOW period of the clock The HIGH period of the clock Set -up time for start condition.(Only relevant for a repeated Start condition.
1.3 0.6 0.6 0 100 20+ 0.1Cb 20+ 0.1Cb 0.6
0.9 300 300 -
s s s s ns ns ns s
Hold time DATA. Set-up time DATA Rise time both SDA and SCL lines. Fall time both SDA and SCL lines. Set-up time for stop condition
tBUF VIH
SDA
VIL
tHD:STA VIH
SCL
tSU:DAT
tHD:DAT
tSU:STA
tSU:STO
VIL tLOW
S
tHIGH
S
P
S
MITSUBISHI ELECTRIC
5
MITSUBISHI ICs (MONITOR)
M61314SP
I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY
2
(3) Pre - Amp Block sub address byte and data byte format
sub add. 00H f unction Main contrast bit 8 8 8 8 8 7 8 8 8 8 4 1 1 2
Data Byte (top:byte format under:start condition)
D7 A07 0 A17 0 A27 0 A37 0
D6 A06 0 A16 0 A26 0 A36 0
D5 A05 0 A15 0 A25 0 A35 0 A45 0
D4 A04 0 A14 0 A24 0 A34 0 A44 0
D3 A03 0 A13 0 A23 0 A33 0 A43 0 A53 0 A63 0 A73 0 A83 0 A93
D2 A02 0 A12 0 A22 0 A32 0 A42 0 A52 0 A62 0 A72 0 A82 0 A92
D1 A01 0 A11 0 A21 0 A31 0 A41 0 A51 0 A61 0 A71 0 A81 0 A91
D0 A00 1 A10 1 A20 1 A30 1 A40 1 A50 1 A60 1 A70 1 A80 1 A90
Brightness 01H control 02H 03H 04H Sub contrast R Sub contrast G Sub contrast B
A47 A46 0 0 A67 0 A77 0 A87 0 A97 0 A56 0 A66 0 A76 0 A86 0 A96 0 -
05H OSD lev el 06H D/A OUT1 07H D/A OUT2 08H D/A OUT3 09H D/A OUT4 Sharpness 0AH control Sy nc Sepa SW Video Det SW Test mode
A55 A54 0 0 A65 0 A75 0 A85 0 A95 0 AA5 0 A64 0 A74 0 A84 0 A94 0 AA4 0 -
0 0 0 1 AA3 AA2 AA1 AA0 0 0 0 1 -
AA7 AA6 0 0
*)pre-data *)subadd. 0AH Sync Sepa SW AA4 0:Sync Sepa ON 1:Sync Sepa OFF Video Det SW AA5 0:Video Det ON 1:Video Det OFF Always set up as AA6 and AA7 in 0 For IIC Data, please transfer in the period of Vertical.
MITSUBISHI ELECTRIC
6
MITSUBISHI ICs (MONITOR)
M61314SP
I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY
2
ELECTRICAL CHARACTERISTICS
Main Contrast Control Characteristics
6 6
Sub Contrast Control Characteristics
4
4
2
2
Sub Contrast : Max ABL : 5V 0 00H 6 Main Contrast Control Data FFH 0 00H 6
Main Contrast : Max ABL : 5V Sub Contrast Control Data FFH
Brightness Control Characteristics
ABL Characteristics
4
4
2
2
Main Contrast:Max Sub Contrast :Max 0 00H Brightness Control Data 0 FFH 0 ABL Control Voltage (VDC) 5
6
OSD Adjust Control Characteristics
6
D/A OUT Control Characteristics
4
4
2
2
0 00H OSD Adjust Control Data 7FH
0 00H
D/A OUT Control Data
FFH
MITSUBISHI ELECTRIC
7
MITSUBISHI ICs (MONITOR)
M61314SP
I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY
2
APPLICATION EXAMPLE
110V
CRT
Cut Off Adj
12V
DAC OUT x4 3K
0.01
3K
3K
ABL IN 0~5VDC
32
SCL
47
100
0.01
0.01
0.01
0.01
0.01
SDA
20
100H 30 29 28 27 26 25 24 23 22 21 19 18 17
31
ClampPulse IN
M61314SP
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 15
1 50K 75 0.01 + 75 47 0.01 + 47 75 1K
BLK IN (for retrace)
OSD (B) OSD OSD (G) OSD (R) BLK
INPUT 12V INPUT (G) (R)
SonG IN
INPUT (B)
Sync Video 5V Sepa. Det. OUT OUT
"Purchase of Mitsubishi electric corporation's I 2C components conv ey s a licence under the Philips I 2C Patent Rights to use these components in an I 2C sy stem, prov ided that the sy stem conf orms the I 2C Standard Specif ication as def ined by Philips"
MITSUBISHI ELECTRIC
8
32P4B
Plastic 32pin 400mil SDIP
Weight(g) 2.2 Lead Material Alloy 42/Cu Alloy
2
EIAJ Package Code SDIP32-P-400-1.78
JEDEC Code -
32
17
E
1
16
D
Symbol
e1
c
DETAILED DIAGRAM OF PACKAGE OUTLINE
A
L
e b1
b
b2
I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY
MITSUBISHI ICs (MONITOR)
M61314SP
SEATING PLANE
A1
A2
MITSUBISHI ELECTRIC
A A1 A2 b b1 b2 c D E e e1 L
Dimension in Millimeters Min Nom Max - - 5.08 0.51 - - - 3.8 - 0.35 0.45 0.55 0.9 1.0 1.3 0.63 0.73 1.03 0.22 0.27 0.34 27.8 28.0 28.2 8.75 8.9 9.05 - 1.778 - - 10.16 - 3.0 - - 0 - 15
9
MITSUBISHI ICs (MONITOR)
M61314SP
I C BUS CONTROLLED VIDEO PRE-AMP FOR HIGH RESOLUTION COLOR DISPLAY Keep safety first in your circuit designs! lMitsubishi Electric Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
2
Notes regarding these materials lThese materials are intended as a reference to assist our customers in the selection of the Mitsubishi semiconductor product best suited to the customers application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party. lMitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-partys rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. lAll information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Mitsubishi Electric Corporation by various means, including the Mitsubishi Semiconductor home page (http://www.mitsubishichips.com). lWhen using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. lMitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. lThe prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in part these materials. lIf these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. lPlease contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for further details on these materials or the products contained therein.
MITSUBISHI ELECTRIC
10

▲Up To Search▲

Price & Availability of M61314SP

	To Download M61314SP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .