View IRHYB597Z30CM_1256701.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD-95841A
RADIATION HARDENED POWER MOSFET THRU-HOLE (Low-Ohmic TO-257AA)
Product Summary
Part Number Radiation Level RDS(on) IRHYB67130CM 100K Rads (Si) 0.042 IRHYB63130CM 300K Rads (Si) 0.042 ID 20A* 20A*
IRHYB67130CM 100V, N-CHANNEL
TECHNOLOGY
Low-Ohmic TO-257AA Tabless
International Rectifier's R6 TM technology provides superior power MOSFETs for space applications. These devices have improved immunity to Single Event Effect (SEE) and have been characterized for useful performance with Linear Energy Transfer (LET) up to 90MeV/(mg/cm2). Their combination of very low RDS(on) and faster switching times reduces power loss and increases power density in today's high speed switching applications such as DC-DC converters and motor controllers. These devices retain all of the well established advantages of MOSFETs such as voltage control, ease of paralleling and temperature stability of electrical parameters.
Features:
n n n n n n n n n n
Low RDS(on) Fast Switching Single Event Effect (SEE) Hardened Low Total Gate Charge Simple Drive Requirements Ease of Paralleling Hermetically Sealed Ceramic Eyelets Electrically Isolated Light Weight
Absolute Maximum Ratings
Parameter
ID @ VGS = 12V, TC = 25C ID @ VGS = 12V, TC = 100C IDM PD @ TC = 25C VGS EAS IAR EAR dv/dt TJ T STG Continuous Drain Current Continuous Drain Current Pulsed Drain Current A Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy A Avalanche Current A Repetitive Avalanche Energy A Peak Diode Recovery dv/dt A Operating Junction Storage Temperature Range Lead Temperature Weight * Current is limited by package For footnotes refer to the last page 20* 19 80 75 0.6 20 107 20 7.5 5.5 -55 to 150
Pre-Irradiation
Units A
W
W/C
V mJ A mJ V/ns
o
C
g
300 (0.063 in. /1.6 mm from case for 10s) 3.7 (Typical)
www.irf.com
1
11/18/04
IRHYB67130CM
Pre-Irradiation
Electrical Characteristics @ Tj = 25C (Unless Otherwise Specified)
Parameter
BVDSS Drain-to-Source Breakdown Voltage BV DSS /T J Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage g fs Forward Transconductance IDSS Zero Gate Voltage Drain Current
Min
100 -- -- 2.0 14 -- -- -- -- -- -- -- -- -- -- -- --
Typ Max Units
-- 0.12 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 6.8 -- -- 0.042 4.0 -- 10 25 100 -100 50 15 12 20 50 35 15 -- V V/C V S( ) A
Test Conditions
VGS = 0V, ID = 1.0mA Reference to 25C, ID = 1.0mA VGS = 12V, ID = 19A A VDS = VGS, ID = 1.0mA VDS = 15V, IDS = 19A A VDS = 80V ,VGS=0V VDS = 80V, VGS = 0V, TJ = 125C VGS = 20V VGS = -20V VGS =12V, ID = 20A VDS = 50V VDD = 50V, ID = 20A VGS =12V, RG = 7.5
IGSS IGSS Qg Q gs Q gd td(on) tr td(off) tf LS + LD
Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (`Miller') Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Inductance
nA nC
ns
nH
Ciss Coss Crss Rg
Input Capacitance Output Capacitance Reverse Transfer Capacitance Internal Gate Resistance
-- -- -- --
1710 343 6.5 1.1
-- -- -- --
pF
Measured from Drain lead (6mm / 0.25in. from package) to Source lead (6mm /0.25in. from package) VGS = 0V, VDS = 25V f = 1.0MHz f = 1.0MHz, open drain
Source-Drain Diode Ratings and Characteristics
Parameter
IS ISM VSD trr Q RR ton Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) A Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time
Min Typ Max Units
-- -- -- -- -- -- 20* -- 80 -- 1.2 -- 250 -- 2.7
Test Conditions
A
V ns C Tj = 25C, IS = 20A, VGS = 0V A Tj = 25C, IF = 20A, di/dt 100A/s VDD 25V A
Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
* Current is limited by package
Thermal Resistance
Parameter
RthJC RthJA Junction-to-Case Junction-to-Ambient
Min Typ Max Units
-- -- -- -- 1.67 80
C/W
Test Conditions
Typical Socket Mount
Note: Corresponding Spice and Saber models are available on International Rectifier Web site. For footnotes refer to the last page
2
www.irf.com
Radiation Characteristics Pre-Irradiation
IRHYB67130CM
International Rectifier Radiation Hardened MOSFETs are tested to verify their radiation hardness capability. The hardness assurance program at International Rectifier is comprised of two radiation environments. Every manufacturing lot is tested for total ionizing dose (per notes 5 and 6) using the TO-3 package. Both pre- and post-irradiation performance are tested and specified using the same drive circuitry and test conditions in order to provide a direct comparison.
Table 1. Electrical Characteristics @ Tj = 25C, Post Total Dose Irradiation AA
Parameter
BVDSS VGS(th) IGSS IGSS IDSS RDS(on) RDS(on) VSD Drain-to-Source Breakdown Voltage Gate Threshold Voltage Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Zero Gate Voltage Drain Current Static Drain-to-Source On-State Resistance (TO-3) Static Drain-to-Source On-State Resistance (Low Ohmic TO-257) Diode Forward Voltage Up to 300K Rads (Si)
Min
100 2.0 -- -- -- -- -- --
Max
Units
V nA A V
Test Conditions
VGS = 0V, ID = 1.0mA VGS = VDS , ID = 1.0mA VGS = 20V VGS = -20V VDS= 80V, VGS=0V VGS = 12V, ID = 19A VGS = 12V, ID = 19A VGS = 0V, ID = 20A
-- 4.0 100 -100 10 0.044 0.042 1.2
Part numbers IRHYB67130CM and IRHYB63130CM
International Rectifier radiation hardened MOSFETs have been characterized in heavy ion environment for Single Event Effects (SEE). Single Event Effects characterization is illustrated in Fig. a and Table 2.
Table 2. Single Event Effect Safe Operating Area
Ion LET
(MeV/(mg/cm2)) Br I Au 36.7 59.8 82.3
Energy
(MeV) 309 341 350
Range
(m) 39.5 32.5 28.4
@VGS= @VGS= @VGS= @VGS=
VDS (V)
@VGS= @VGS= @VGS=
0V 100 100 100
-5V 100 100 100
-10V 100 100 -
-15V 100 30 -
-17V 100 -
-19V 100 -
-20V 40 -
120 100 80 60 40 20 0 0 -5 -10 VGS -15 -20
Br I Au
For footnotes refer to the last page
www.irf.com
VDS
Fig a. Single Event Effect, Safe Operating Area
3
IRHYB67130CM
Pre-Irradiation
1000
ID, Drain-to-Source Current (A)
100
10
ID, Drain-to-Source Current (A)
VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP
1000
VGS 15V 12V 10V 9.0V 8.0V 7.0V 6.0V BOTTOM 5.0V TOP
100
1
5.0V 60s PULSE WIDTH Tj = 25C
10 5.0V 60s PULSE WIDTH Tj = 150C 1 0.1 1 10 100
0.1 0.1 1 10 100 VDS, Drain-to-Source Voltage (V)
VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
Fig 2. Typical Output Characteristics
100
RDS(on) , Drain-to-Source On Resistance (Normalized)
2.5
ID = 20A
2.0
ID, Drain-to-Source Current (A)
T J = 150C
T J = 25C 10
1.5
1.0
VDS = 50V 15 60s PULSE WIDTH 1 5 6 7 8 9 10 VGS , Gate-to-Source Voltage (V)
0.5
VGS = 12V
0.0 -60 -40 -20 0 20 40 60 80 100 120 140 160
T J , Junction Temperature (C)
Fig 3. Typical Transfer Characteristics
Fig 4. Normalized On-Resistance Vs. Temperature
4
www.irf.com
Pre-Irradiation
IRHYB67130CM
3000
VGS , Gate-to-Source Voltage (V)
2500
100KHz VGS = 0V, f = 1 MHz Ciss = C gs + Cgd, C ds SHORTED Crss = Cgd
20 ID = 20A 16 VDS = 80V 6 VDS = 50V VDS = 20V
Coss = Cds + Cgd
C, Capacitance (pF)
2000
Ciss
12
1500
Coss
1000
8
500
4 FOR TEST CIRCUIT SEE FIGURE 13 0 0 10 20 30 40 50 60
Crss
1 10 100
0
VDS, Drain-to-Source Voltage (V)
Q G, Total Gate Charge (nC)
Fig 5. Typical Capacitance Vs. Drain-to-Source Voltage
Fig 6. Typical Gate Charge Vs. Gate-to-Source Voltage
100
1000 OPERATION IN THIS AREA LIMITED BY R DS(on)
10
T J = 150C
ID, Drain-to-Source Current (A)
ISD, Reverse Drain Current (A)
100
T J = 25C
10
100s 1ms
1
1 Tc = 25C Tj = 150C Single Pulse 1 10
10ms
VGS = 0V 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 VSD , Source-to-Drain Voltage (V)
0.1
100
1000
VDS , Drain-to-Source Voltage (V)
Fig 7. Typical Source-Drain Diode Forward Voltage
Fig 8. Maximum Safe Operating Area
www.irf.com
5
IRHYB67130CM
Pre-Irradiation
35
LIMITED BY PACKAGE
30
VDS VGS RG
RD
D.U.T.
+
ID , Drain Current (A)
25 20 15 10 5 0
-V DD
VGS
Pulse Width 1 s Duty Factor 0.1 %
Fig 10a. Switching Time Test Circuit
VDS 90%
25
50
TC , Case Temperature ( C)
75
100
125
150
Fig 9. Maximum Drain Current Vs. Case Temperature
10% VGS
td(on) tr t d(off) tf
Fig 10b. Switching Time Waveforms
10
Thermal Response ( Z thJC )
1
D = 0.50 0.20 0.10 0.05 0.02 0.01
0.1
P DM t1 t2
0.01
SINGLE PULSE ( THERMAL RESPONSE )
Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc
0.001 1E-006 1E-005 0.0001 0.001 0.01 0.1 1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
6
www.irf.com
Pre-Irradiation
IRHYB67130CM
200
EAS , Single Pulse Avalanche Energy (mJ)
15V
160
ID TOP 9.0A 12.6A BOTTOM 20A
VDS
L
DRIVER
120
RG
D.U.T.
IAS tp
+ - VDD
A
80
VGS 20V
0.01
Fig 12a. Unclamped Inductive Test Circuit
40
0 25 50 75 100 125 150
V(BR)DSS tp
Starting T J , Junction Temperature (C)
Fig 12c. Maximum Avalanche Energy Vs. Drain Current
I AS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator Same Type as D.U.T.
50K
QG
12V
.2F .3F
12 V
QGS
QGD
VGS
3mA
D.U.T.
+ V - DS
VG
Charge
IG
ID
Current Sampling Resistors
Fig 13a. Basic Gate Charge Waveform
Fig 13b. Gate Charge Test Circuit
www.irf.com
7
IRHYB67130CM
Pre-Irradiation
Footnotes:
A Repetitive Rating; Pulse width limited by
maximum junction temperature. A VDD = 25V, starting TJ = 25C, L= 0.54mH Peak IL = 20A, VGS = 12V A ISD 20A, di/dt 575A/s, VDD 100V, TJ 150C
A Pulse width 300 s; Duty Cycle 2% A Total Dose Irradiation with VGS Bias.
12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, method 1019, condition A. A Total Dose Irradiation with VDS Bias. 80 volt VDS applied and V GS = 0 during irradiation per MlL-STD-750, method 1019, condition A.
Case Outline and Dimensions -- Low-Ohmic TO-257AA ( Tabless)
A 10.66 [.420] 10.42 [.410] 5.08 [.200] 4.83 [.190]
10.92 [.430] 10.42 [.410] 1 2 3
B
C 15.88 [.625] 12.70 [.500]
0.71 [.028] MAX. 0.13 [.005]
2.54 [.100]
2X
3X O
0.88 [.035] 0.64 [.025]
BA
3.05 [.120]
O 0.50 [.020]
NOT ES : 1. 2. 3. 4. DIMENS IONING & T OLERANCING PER ANS I Y14.5M-1994. CONT ROLLING DIMENS ION: INCH. DIMENS IONS ARE S HOWN IN MILLIMET ERS [INCHES ]. OUT LINE CONFORMS T O JEDEC OUT LINE T O-257AA.
LEAD ASSIGNMENTS 1 = DRAIN 2 = SOURCE 3 = GATE
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 11/2004
8
www.irf.com

▲Up To Search▲

Price & Availability of IRHYB597Z30CM

	To Download IRHYB597Z30CM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .