Part Number Hot Search : 
AN435 MAX14503 AN1778 OSO5G 101M10 IRF843 ON2527 HK160
Product Description
Full Text Search
 

To Download IL1084 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 IL1084 IC OF ADJUSTABLE VOLTAGE REGULATOR OF POSITIVE POLARITY WITH LOW RESIDUAL VOLTAGE AND LOAD CURRENT 5A.
IC IL1084 is a powerful adjustable voltage regulator of positive polarity with low residual voltage and load current 5,5A. IC of powerful adjustable voltage regulator with low residual voltage lower than 1,5A and reference voltage 1,25 V is purposed for producing constant temperature-stabilized voltage of positive polarity by means of the value set by external resistive divider and used in electronic equipment as a source of stabilized supply. Properties: * Reference voltage 1,25V * Output current up to 5,5 A * Input-output voltage difference, UIN - UO up to 30 V * Residual voltage lower than 1,5 V * Overload protection * Embedded temperature protection * Operation range of chip temperature from 0 up to +125N.
TO-220
1 2 3 Output 1. Adjustment 2. Output 3. Input
Table 1 - Description of regulator IC pins in 3-pin package OI-220 Pin No. Description Name 01 Adjustment Adjust 02 Output Output 03 Input Input
Korzhenevskogo 12, Minsk, 220064, Republic of Belarus Fax: +375 (17) 278 28 22, Phone: +375 (17) 278 07 11, 277 24 70, 277 24 61, 277 69 16 E-mail: belms@belms.belpak.minsk.by URL: www.bms.by
IL1084
D1 Output 03
UIN
Input
IL1084
01 Adjust
02 R1
UO
Cin
IAdj Co
R2
N1, N2 - smoothing capacitors, C1=10 mkF, N2=100 mkF (Ta), D1 - IC, R1, R2 - resistors, R1=121 Ii 1%, R2 - adjusted with accuracy 1%. Output voltage Uo, V, is defined by formula:
U
O
=U
ref
(1 +
R2 ) + I Adj R 2 , R1
Where U ref - reference voltage, V,
I Adj - adjustment current, mkA.
Since IADJ has values not more than 120 mkA, inaccuracy dependent on this value for Uo - is minor.
Figure 1 - Connection circuit of adjustable voltage regulator
Korzhenevskogo 12, Minsk, 220064, Republic of Belarus Fax: +375 (17) 278 28 22, Phone: +375 (17) 278 07 11, 277 24 70, 277 24 61, 277 69 16 E-mail: belms@belms.belpak.minsk.by URL: www.bms.by
IL1084
TABLE 2 - OABLE OF ELECTRICAL CHARACTERISTICS
Characteristic, measurement unit Symbol Measurement mode Standard min Reference voltage, V Uref IO=10iA (UIN - UO)=3V 10mA IO I FULL LOAD 1,5V (UIN - UO) 25V IO=10 mA, 1,5V (UIN - UO) 15V IO=10 mA, 15V (UIN - UO) 30V (UIN - UO) = 3V 10mA IO 5A Uref = 1 %, IO= 5A (UIN - UO) = 5V (UIN - UO) = 25V (UIN - UO) = 25V Tpal=30ms TA=25OC f=120Ao, NAdj =25mkF, NI=25 mkF (Ta), IO= 5A,(UIN - UO)=3V 10mA IO I FULL LOAD 1,5V (UIN - UO) 25V 1000 h ;TJ = 125 OC (when testing) 1,238 1,225 5,5 0,3 60 Max 1,262 1,270 0,2 0,5 0,3 0,4 1,5 10 0,015 Temperature TJ, OC 2510 0/125 0/125 0/125 2510 0/125 0/125 0/125 0/125 0/125 0/125
Change of output voltage when input voltage changes, %
Regline
Change of output voltage when load current changes, % Residual voltage, V Maximum output current, A Minimum output current, mA Thermostabilization, %/W Pulsation smoothing ratio, dB
Regload Uds IO max IO min Regterm RR
Adjustment current, mkA Change of adjustment current, mkA Ratio of output voltage temporary instability, %
IAdj IAdj S
-
120 5 1
0/125 0/125 2510
Notes: 1 Measurement of electrical characteristics is carried out when capacitance NIN=10 mkF is connected to the input and NI=100 mkF - to the output; 2 Reference voltage Uref in adjustable regulator is measured between outputs Output and Adjust on resistance R1 (figure 1); 3 Parameters stipulated in table 1 are ensured for constant chip temperature TJ. Measurement of parameters should be performed using heatsink and pulse technique; 4 I FULL LOAD - value of maximum output current dependent on input-output voltage difference (U IN - UO) with power dissipation in package EO-28 - 30 W.
Korzhenevskogo 12, Minsk, 220064, Republic of Belarus Fax: +375 (17) 278 28 22, Phone: +375 (17) 278 07 11, 277 24 70, 277 24 61, 277 69 16 E-mail: belms@belms.belpak.minsk.by URL: www.bms.by
IL1084
Table 3 - Typical values of electrical characteristics
Characteristic, Measurement unit Adjustment current, mkA Temperature ratio of output voltage instability, % Noise voltage on output, (% ) Symbol . IAdj TS Un rms Measurement mode TJ = 25 OC TJ = 0/125 OC TJ = 25 OC 10 Ao f 10 eAo Typical value 55 0,5 0,003
Table 4 - Table of maximum and absolute maximum ratings
Measurement unit V C O C
O
Maximum ratings min 2,77 0 max 30 125
Parameter Input-output voltage difference, UIN - UO Chip temperature, OJ Storage temperature, Ostg
Absolute maximum ratings min 0 -65 -65 max 31 150 150
Korzhenevskogo 12, Minsk, 220064, Republic of Belarus Fax: +375 (17) 278 28 22, Phone: +375 (17) 278 07 11, 277 24 70, 277 24 61, 277 69 16 E-mail: belms@belms.belpak.minsk.by URL: www.bms.by


▲Up To Search▲   

 
Price & Availability of IL1084

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X