 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FC Type Fiber Optic Connectors HRFC Series MU SC FC Harsh Environment sFeatures 1. JIS, IEC standards compliantand and fully intermateable with NTT's FC products. JIC C 5970 (F01 type fiber optic connectors). IEC 61754-13 Attenuators 2. Two types of plug frames Conventional cutout key ring types and molded key ring types are available. Important Notice Plug key width : 2.1mm Adapter key width : 2.2mm Terminators sApplications Public communications lines, CATV, Test equipment, etc. 47 sProduct Specifications Ratings Operating temperature range -25C to +70C Storage temperature range -25C to +70C MU Item Optical Characteristics Insertion Loss Return Loss Ferrule withdrawal Cable retention (Straight pull) Durability (cycles, mating/un-mating) Vibration Shock Humidity (Temperature/ humidity- cycles) Change of temperature Dry heat Cold Salt mist (SM) (GI) (SM) (GI) Test Method (IEC 61300) Wavelength 1310nm (LD) Wavelength 1310nm (LED) Wavelength 1310nm (LD) Extract Zirconia gauge 2.499 0.0005 mm dia from split sleeve. 98N tensile load for minute. 1000 times Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Acceleration of 981 m/s2, 6 ms duration, sin half-wave waveform, 10 cycles in each of the 3 axis. -10C to 65C, humidity: 90% to 96% 20 cycles -40C to +70C 42 cycles (Complies with Telcordia standard GR-326-CORE) 960 hours at 85C 960 hours at -25C 48 hours in a 5% concentration of salt mist Specifications 0.5dB max. (PC, AdPC, APC) 0.3dB max. (PC) 22dB min.(PC) 40dB min.(AdPC) 60dB min. (APC) 22dB min. (PC) Copper alloy split sleeve Zirconia split sleeve 2N to 5.9N 2N to 3.9N Mechanical Characteristics 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, dislocation of clamp or cable. SC 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, cracks or part dislocation. FC Environmental Characteristics No significant corrosion. Harsh Environment sMaterials Part Material Brass, Stainless steel or Zinc alloy Stainless steel Zirconia Brass Copper alloy Brass Stainless steel Attenuators Plug housing Spring Ferrule Adapter Split sleeve Receptacle Attenuator housing Terminators 48 sFC products MU Plug Housing Key width 2.1mm For 2 mm cable, Molded keying ring type Cutout keying ring type For 3 mm cable, Molded keying ring type Cutout keying ring type SC For 0.9 mm fiber, Molded keying ring type Cutout keying ring type Ferrule Single mode Multi mode FC Adapter Key width 2.2mm Standard type Solid Body type HRFC-type Connector Round type Flange type Harsh Environment Conversion adapter FC to SC FC to SC Receptacle Attenuators Dust cap Fixed type Attenuator Single mode GI Variable type Single mode Terminators Terminator 49 sMolded keying ring type (Key width 2.1mm) qFor 2mm cable MU M80.75 52.8 Part Number HRFC-P8-H2(21) HRFC-P8-L2(21) HRFC-P8-G2(21) O10 CL No. 701-0075-3-21 701-0077-9-21 701-2001-8-21 Boot color Blue Light purple Green Polishing type PC AdPC APC SC qFor 3mm cable M80.75 52.8 Part Number HRFC-P8-H3(21) O10 CL No. 701-0074-0-21 701-0078-1-21 701-2002-0-21 Boot color Blue Light purple Green Polishing type PC AdPC APC FC HRFC-P8-L3(21) HRFC-P8-G3(21) qFor 0.9mm fiber 30.8 Harsh Environment Part Number HRFC-P15-H(21) HRFC-P15-L(21) M80.75 O10 CL No. 701-0114-3-21 701-0115-6-21 701-2004-6-21 Boot color Blue Light purple Green Polishing type PC AdPC APC Attenuators HRFC-P15-G(21) sTool qCrimp tool Part Number HSC-T3 CL No. 704-0287-0 Applicable connector HRFC-P8-H2,L2,G2, HRFC-P8-H3,L3,G3, Terminators (1)2mm Jacket crimping: section A 3mm Jacket crimping: section C (2)KevlarTM crimping: section B 50 sCutout keying ring type (Key width 2.1mm) qFor 2mm cable 37.8 MU M80.75 O10 SC Part Number HRFC-P1-H(04) CL No. 701-0001-7-04 qFor 3mm cable 37.8 M80.75 FC O10 Part Number HRFC-P1-H CLNo. 701-0001-7 qFor 0.9mm fiber 27.8 Harsh Environment M80.75 O10 Attenuators Part Number HRFC-P6-H CL No. 701-0041-1 Terminators 51 sAdapters (Key width 2.2mm) qSolid Body type MU M80.75 15 4 M80.75 15 9.5 BPanel Cutout O9 +0.5 0 2-M20.4 or 2-O2.4 +0.2 0 s ter .2 O2 Coun 4 O d ink ep th 1.5 FC-A 9.5 15 13.40.1 Board thiekness : 16mm Part Number CL No. 701-0071-2 701-0106-5 Split sleeve Copper alloy Zirconia Remarks SC HRFC-PA11-G1 HRFC-PA11-D1 (Note) qStandard Body type Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. 15 4 2--M80.75 2--M20.4 or 2--O2.4 +0.2 0 FC-A 15 9.5 BPanel Cutout O9+0.5 0 FC O2.2 O4 Countersink depth 1.5 13.40.1 Board thiekness : 16mm Part Number HRFC-PA1-G1(02) HRFC-PA1-D1(02) CL No 701-0014-9-02 701-0089-8-02 Mark Split sleeve FC-AP Copper alloy FC-AA Zirconia Remarks (Note) Harsh Environment Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. qFlange type 2--M80.75 15 2 BPanel Cutout O9 +0.5 0 2--M20.4 or 2--O2.4 +0.2 0 O19 13.45 2- O2.2 2--O4 Countersink depth 1.5 13.40.1 Attenuators Part Number HRFC-PA4-G1 HRFC-PA4-D1 CL No. 701-0068-8 701-0112-8 Split sleeve Copper alloy Zirconia Remarks (Note) qRound type Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. 15 Terminators Part Number HRFC-A2-SF(01) HRFC-A2-SF-D1 O8 CL No. 701-0039-0-01 ----- Split sleeve Copper alloy Zirconia Remarks (Note) Note:Please take utmost care when inserting FC plug into a FC adapter. When applying excessive force to the FC plug or inserting in an odd angle, the zirconia sleeve within the adapter might be dameged. 52 sConversion adapters qFC / SC 2--M80.75 21.2 5.5 3.5 12.2 15 BPanel Cutout O9+0.5 0 MU 12.8 O19 2--M20.4 or 2--O2.4 +0.2 0 9 13.4 13.40.1 Board thiekness : 16mm Part Number HSCJ-HRFCJ-B(51) CL No. 704-0021-3-51 Split sleeve Copper alloy SC qFC / SC 9.15 15 13.7 (3.9) 32 9 12.8 Part Number HRFCP-HSCJ-1(51) HRFCP-HSCJ-1AS(51) HRFCP-HSCJ-2(51) HRFCP-HSCJ-2AS(51) CL No. 701-0065-0-51 701-0108-0-51 701-0085-7-51 701-0109-3-51 Split sleeve 7.4 O19 Polishing type Fiber type PC AdPC PC AdPC GI-50/125 FC Copper alloy SM-9.5/125 qFC / SC Harsh Environment M80.75 12.8 7.4 9.4 9 (1.8) 21 27.9 Part Number HSCP-HRFCJ-1(51) HSCP-HRFCJ-1AS(51) HSCP-HRFCJ-2(51) HSCP-HRFCJ-2AS(51) CL No. 704-0203-0-51 704-0288-3-51 704-0204-3-51 704-0289-6-51 Split sleeve Polishing type Fiber type Attenuators PC Copper alloy AdPC PC AdPC GI-50/125 SM-9.5/125 sReceptacle 9 3 5.5 M80.75 FC-A M15 M9.5 BPanel Cutout O9 +0.5 0 Terminators 4--M20.4 or 4--O2.4 +0.2 0 4- O2.2 O4 Countersink depth 1.5 9.50.1 Part Number HRFC-R1 HRFC-R2 HRS No. 701-0016-4 701-0023-0 Remarks MM SM 53 sFerrule Same as SC ferrules Refer to page 33 for details. MU sDust Cap SC Part Number HRFC-C1 CL No. 701-0019-2 Terminators Attenuators Harsh Environment FC 54 |
Price & Availability of HSCP-HRFCJ-2AS51
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |