![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
05223 EM8D-100L Only One Name Means ProT ek'TionTM EMI FIL TER/TVS ARRA Y APPLICA TIONS Cellular Phones Color LCD Display Panel Notebooks Personal Digital Assistant (PDA) Ground Positioning System (GPS) SMART Cards IEC COMPA TIBILITY (EN61000-4) 61000-4-2 (ESD): Air - 15kV, Contact - 8kV 61000-4-4 (EFT): 40A - 5/50ns FEA TURES ESD Protection > 25 kilovolts Bidirectional EMI Filtering/TVS Low Pass Filters Protects Up to Eight(8) Data Lines RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) DFN-16 DFN-16 Package Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245C Pure-Tin - Sn, 100: 260-270C Flammability rating UL 94V-0 Lead-Free Finishing Available Device Marking: Marking Code 12mm Tape and Reel Per EIA Standard 481 PIN CONFIGURA TION For Each Line I/On 100 Ohm I/On 1 2 3 4 5 6 7 8 GND 10pF GND 10pF 16 15 14 13 12 11 10 BOTTOM VIEW 9 Note: I/O connected from pins 1-16, 2-15, 3-14, 5-12, 6-11, 7-10 and 8-9. 05223.R2 1/06 1 www.protekdevices.com EM8D-100L DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25C Unless Otherwise Specified PARAMETER Operating Temperature Storage Temperature DC Power Per Resistor Typical Resistance @ 15% SYMBOL TJ TSTG P R VALUE -40C to 85C -55C to 150C 100 100 UNITS C C mW OHMS ELECTRICAL CHARACTERISTICS PER LINE @ 25C Unless Otherwise Specified PART NUMBER DEVICE MARKING RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT TYPICAL FORWARD VOLTAGE MINIMUM ATTENUATION TYPICAL CUT-OFF FREQUENCY CAPACITANCE PER LINE (50 OHMS I/O) (See Note 1) ZERO BIAS VWM VOLTS EM8D-100L M8D 10L 5.0 @ 1mA V(BR) VOLTS 6.0 @ 3V ID A 0.1 @10mA VF VOLTS 0.8 @ 800-3000 MHz dB 25 fc MHz 150 @2.5V, 1MHz C pF 20 Note 1: 20% tolerance. FIGURE 1 INSERTION LOSS 0 -5 -10 Gain (dB) -15 -20 -25 -30 -35 0.1 1 10 100 2.5 Volts 0 Volts 1000 10000 Frequency (MHz) 05223.R2 1/06 2 www.protekdevices.com EM8D-100L GRAPHS FIGURE 2 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25C) 1.6 Cj - Capacitance (Normalized) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts 1.100 FIGURE 3 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25C) Normalized Resistance 1.060 1.020 0.980 0.940 0.900 -40 -20 0 20 40 Temperature C 60 80 100 FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE 35 5 Volts per Division 25 15 5 -5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform) 05223.R2 1/06 3 www.protekdevices.com EM8D-100L PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE D PACKAGE DIMENSIONS MILLIMETERS DIM A A1 A3 b D E E2 E3 E4 e K L MIN 0.74 0.00 0.178 0.18 3.91 1.50 0.40 2.92 3.07 0.46 0.33 0.18 MAX 0.84 0.05 0.228 0.25 4.11 1.70 0.50 3.18 3.33 0.56 0.40 0.28 INCHES MIN 0.029 0.00 0.007 0.007 0.154 0.059 0.016 0.115 0.121 0.018 0.130 0.007 MAX 0.033 0.002 0.009 0.009 0.162 0.067 0.020 0.125 0.131 0.022 0.160 0.011 E Pin 1 Reference TOP VIEW A3 A SIDE VIEW A3 A1 L 1 NOTES: 1. Controlling dimensions in millimeters 2. Dimensino b applies to terminal and is measured between 0.25 and 0.30mm from terminal. 3. Coplanarity applies to the exposed pad as well as the terminals. TAPE & REEL ORDERING NOMENCLATURE e 8 E3 E2 E4 16 9 BOTTOM VIEW b K 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 12mm tape, i.e., EM8D-100L-T7 3. Suffix-T13 = 13 Inch Reel - 12,000 pieces per 12mm tape, i.e., EM8D-100L-T13 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., EM8D-100L-LF-T7. Outline & Dimensions: Rev 1 - 9/05, 06056 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. 178mm (7")/330mm(13") Tape Width 12mm A0 1.9 0.10 B0 K0 D E F W P0 P2 P tmax 0.25 4.30 0.10 1.00 0.10 1.50 0.10 1.75 0.10 3.50 0.05 12.00 0.30 4.00 0.10 2.00 0.05 4.00 0.10 P0 10 Pitches Cumulative Tolerance on Tape. 0.2 t D P2 E Top cover tape A0 K0 B0 Pin 1 Indicated by Dot F W P User Direction of Feed COPYRIGHT (c) ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer's and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com 05223.R2 1/06 4 www.protekdevices.com |
Price & Availability of EM8D100L
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |