View DTB133HS_1235063.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DTB133HS
Transistors
Digital transistors (built-in resistors)
DTB133HS
Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors. 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input, and parasitic effects are almost completely eliminated. 3) Only the on/off conditions need to be set for operation, making device design easy. 4) Higher mounting densities can be achieved.
External dimensions (Unit : mm)
4
3
2
(15Min.)
3Min.
0.45
2.5 5 (1) (2) (3)
0.5 0.45
Taping specifications
Equivalent circuit
IN
R1 R2
ROHM : SPT EIAJ : SC-72
OUT
(1) GND (2) OUT (3) IN
GND (+)
IN GND (+) OUT
Absolute maximum ratings (Ta=25C)
Parameter Supply voltage Input voltage Output current Power dissipation Junction temperature Storage temperature Symbol VCC VI IC Pd Tj Tstg Limits -50 -20 6 -500 300 150 -55 to +150 Unit V V mA mW C C
Package, marking, and packaging specifications
Part No. Package Marking Packaging code Basic ordering unit (pieces) DTB133HS SPT - TP 5000
Rev.A
1/2
DTB133HS
Transistors
Electrical characteristics (Ta=25C)
Parameter Input voltage Output voltage Input current Output current DC current gain Input resistance Resistance ratio Transition frequency Transition frequency of the device. Symbol VI(off) VI(on) VO(on) II IO(off) GI R1 R2/R1 fT Min. - -2 - - - 56 2.31 2.4 - Typ. - - -0.1 - - - 3.3 3 200 Max. -0.3 - -0.3 -2.4 -0.5 - 4.29 3.7 - Unit V V mA A - k - MHz Conditions VCC= -5V, IO= -100A VO= -0.3V, IO= -20mA IO= -50mA, II= -2.5mA VI= -5V VCC= -50V, VI=0V IO= -50mA, VO= -5V - - VCE= -10V, IE=50mA, f=100MHz
Electrical characteristic carves
100 50
VO=0.3V
10m 5m
VCC=5V
Ta=100C
1k 500
VO=5V
Ta=100C Ta=25C
INPUT VOLTAGE : VI(on) (V)
1m 500 200 100 50 20 10 5 2
Ta= -40C Ta=25C
10 5 2 1 500m 200m 100m 500 1m 2m 5m 10m 20m 50m 100m 200m 500m
Ta=100C Ta=25C Ta= -40C
DC CURRENT GAIN : GI
20
OUTPUT CURRENT : IO (A)
2m
200 100 50 20 10 5 2
Ta= -40C
1 0
500m
1
1.5
2
2.5
3
1 500
1m
2m
5m
10m 20m
50m 100m 200m 500m
OUTPUT CURRENT : IO (A)
INPUT VOLTAGE : VI(off) (V)
OUTPUT CURRENT : IO (A)
Fig.1 Input voltage vs. Output current (ON characteristics)
Fig.2 Output current vs. Input voltage (OFF characteristics)
Fig.3 DC current gain vs. Output current
1 500m
IO/II=20/1
Ta=100C
OUTPUT VOLTAGE : VO(on) (V)
200m
Ta=25C
100m 50m 20m 10m 5m 2m 1m 500 1m 2m 5m 10m 20m 50m 100m 200m 500m
Ta= -40C
OUTPUT CURRENT : IO (A)
Fig.4 Output voltage vs. Output current
Rev.A
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1

▲Up To Search▲

Price & Availability of DTB133HS

	To Download DTB133HS Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .