View CPV363MK_1228200.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Previous Datasheet
Index
Next Data Sheet
PD - 5.034
CPV363MK
IGBT SIP MODULE
Features
* Short Circuit Rated - 10s @ 125C, V GE = 15V Fully isolated printed circuit board mount package * Switching-loss rating includes all "tail" losses TM * HEXFRED soft ultrafast diodes * Optimized for high operating frequency (over 5kHz) See Fig. 1 for Current vs. Frequency curve *
3 Q1 D1 9 4 6 Q2 D2 12 Q4 D4 18 Q3 D3 15 Q5 D5 16 D6
Short Circuit Rated UltraFast IGBT
1
10 Q6
Product Summary
7 13 Output Current in a Typical 20 kHz Motor Drive 5.4 ARMS per phase (1.7 kW total) with T C = 90C, T J = 125C, Supply Voltage 360Vdc, Power Factor 0.8, Modulation Depth 80% (See Figure 1) 19
Description
The IGBT technology is the key to International Rectifier's advanced line of IMS (Insulated Metal Substrate) Power Modules. These modules are more efficient than comparable bipolar transistor modules, while at the same time having the simpler gate-drive requirements of the familiar power MOSFET. This superior technology has now been coupled to a state of the art materials system that maximizes power throughput with low thermal resistance. This package is highly suited to power applications and where space is at a premium. These new short circuit rated devices are especially suited for motor control and other totem-pole applications requiring short circuit withstand capability.
IMS-2
Absolute Maximum Ratings
Parameter
VCES IC @ T C = 25C IC @ T C = 100C ICM ILM IF @ T C = 100C IFM tsc VGE VISOL PD @ T C = 25C PD @ T C = 100C TJ TSTG Collector-to-Emitter Voltage Continuous Collector Current, each IGBT Continuous Collector Current, each IGBT Pulsed Collector Current Clamped Inductive Load Current Diode Continuous Forward Current Diode Maximum Forward Current Short Circuit Withstand Time Gate-to-Emitter Voltage Isolation Voltage, any terminal to case, 1 min. Maximum Power Dissipation, each IGBT Maximum Power Dissipation, each IGBT Operating Junction and Storage Temperature Range Soldering Temperature, for 10 sec. Mounting torque, 6-32 or M3 screw.
Max.
600 11 6.0 22 22 6.1 22 10 20 2500 36 14 -40 to +150 300 (0.063 in. (1.6mm) from case) 5-7 lbf*in (0.55 - 0.8 N*m)
Units
V
A
s V VRMS W
C
Thermal Resistance
Parameter
RJC (IGBT) RJC (DIODE) RCS (MODULE) Wt Junction-to-Case, each IGBT, one IGBT in conduction Junction-to-Case, each diode, one diode in conduction Case-to-Sink, flat, greased surface Weight of module
Typ.
-- -- 0.1 20 (0.7)
Max.
3.5 5.5 -- --
Units
C/W g (oz)
Revision 2
C-971
To Order
Previous Datasheet
Index
Next Data Sheet
CPV363MK
Electrical Characteristics @ T = 25C (unless otherwise specified) J
V(BR)CES
V(BR)CES/TJ
VCE(on)
VGE(th) VGE(th)/TJ gfe ICES VFM IGES
Parameter Min. Typ. Collector-to-Emitter Breakdown Voltage 600 -- Temperature Coeff. of Breakdown Voltage -- 0.45 Collector-to-Emitter Saturation Voltage -- 2.0 -- 2.5 -- 2.1 Gate Threshold Voltage 3.0 -- Temperature Coeff. of Threshold Voltage -- -13 Forward Transconductance 3.0 6.0 Zero Gate Voltage Collector Current -- -- -- -- Diode Forward Voltage Drop -- 1.4 -- 1.3 Gate-to-Emitter Leakage Current -- --
Max. Units Conditions -- V VGE = 0V, I C = 250A -- V/C VGE = 0V, IC = 1.0mA 3.0 IC = 6.0A V GE = 15V -- V IC = 11A See Fig. 2, 5 -- IC = 6.0A, T J = 150C 5.5 VCE = VGE, IC = 250A -- mV/C VCE = VGE, IC = 250A -- S VCE = 100V, I C = 12A 250 A VGE = 0V, V CE = 600V 2500 VGE = 0V, V CE = 600V, T J = 150C 1.7 V IC = 12A See Fig. 13 1.6 IC = 12A, T J = 150C 500 nA VGE = 20V
Switching Characteristics @ T = 25C (unless otherwise specified) J
Qg Qge Qgc td(on) tr td(off) tf Eon Eoff Ets tsc td(on) tr td(off) tf Ets Cies Coes Cres trr Irr Qrr di(rec)M/dt Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Short Circuit Withstand Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Switching Loss Input Capacitance Output Capacitance Reverse Transfer Capacitance Diode Reverse Recovery Time Diode Peak Reverse Recovery Current Diode Reverse Recovery Charge Diode Peak Rate of Fall of Recovery During t b Min. -- -- -- -- -- -- -- -- -- -- 10 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Typ. Max. Units Conditions 34 52 IC = 12A 7.8 12 nC VCC = 400V 13 21 See Fig. 8 64 -- TJ = 25C 24 -- ns IC = 6.0A, V CC = 480V 130 200 VGE = 15V, R G = 23 20 30 Energy losses include "tail" and 0.23 -- diode reverse recovery. 0.17 -- mJ See Fig. 9, 10, 11, 18 0.40 0.60 -- -- s VCC = 360V, T J = 125C VGE = 15V, R G = 23, VCPK < 500V 58 -- TJ = 150C, See Fig. 9, 10, 11, 18 24 -- ns IC = 6.0A, V CC = 480V 240 -- VGE = 15V, R G = 23 140 -- Energy losses include "tail" and 0.61 -- mJ diode reverse recovery. 740 -- VGE = 0V 100 -- pF VCC = 30V See Fig. 7 9.3 -- = 1.0MHz 42 60 ns TJ = 25C See Fig. 80 120 TJ = 125C 14 I F = 12A 3.5 6.0 A TJ = 25C See Fig. 5.6 10 TJ = 125C 15 V R = 200V 80 180 nC TJ = 25C See Fig. 220 600 TJ = 125C 16 di/dt = 200A/s 180 -- A/s TJ = 25C See Fig. 120 -- TJ = 125C 17 Pulse width 5.0s, single shot.
Notes: Repetitive rating; V GE=20V, pulse width limited by max. junction temperature. ( See fig. 20)
VCC=80%(V CES), VGE=20V, L=10H, R G= 23, ( See fig. 19 ) Pulse width 80s; duty factor 0.1%.
C-972
To Order
Previous Datasheet
Index
Next Data Sheet
CPV363MK
8
2.5
6
1.9
4
1.2
2
TC = 90C TJ = 125C Power Factor = 0.8 Modulation Depth = 0.8 VCC = 60% of Rated Voltage
0.1 1 10 100
0.6
0
0
f, Frequency (kHz)
Fig. 1 - RMS Current and Output Power, Synthesized Sine Wave
100
100
IC , Collector-to-Emitter Current (A)
T = 25C J TJ = 150C
10
IC , Collector-to-Emitter Current (A)
TJ = 150C
10
TJ = 25C
1
0.1 0.1 1
VGE = 15V 20s PULSE WIDTH A
10
1 5 10
VCC = 100V 5s PULSE WIDTH A
15 20
VCE , Collector-to-Emitter Voltage (V)
VGE, Gate-to-Emitter Voltage (V)
Fig. 2 - Typical Output Characteristics
Fig. 3 - Typical Transfer Characteristics
C-973
To Order
Total Output Power (kW)
Load Current (A)
Previous Datasheet
Index
Next Data Sheet
CPV363MK
12
VCE , Collector-to-Emitter Voltage (V)
Maximum DC Collector Current (A)
VGE = 15V
3.5
VGE = 15V 80s PULSE WIDTH
3.0
9
I C = 12A
2.5
6
I C = 6.0A
2.0
I C = 3.0A
1.5
3
0 25 50 75 100 125
A
150
1.0 -60 -40 -20 0 20 40 60 80
A
100 120 140 160
TC , Case Temperature (C)
TC, Case Temperature (C)
Fig. 4 - Maximum Collector Current vs. Case Temperature
Fig. 5 - Collector-to-Emitter Voltage vs. Case Temperature
10
T herma l R espo nse (Z th JC )
D = 0 .5 0
1
0.2 0 0.1 0 0 .05
0.1
0.0 2 0.0 1 S ING L E PU LS E (TH E R MAL RE S PO N SE )
N o te s : 1 . D u ty fa c to r D = t 1 /t
PD M
t
1 t2
2
0.01 0.00001
2 . P e a k T J = P D M x Z thJ C + T C
0.0001
0.001
0.01
0.1
1
10
t 1 , R ectangular Pulse D uration (sec)
Fig. 6 - Maximum IGBT Effective Transient Thermal Impedance, Junction-to-Case
C-974
To Order
Previous Datasheet
Index
Next Data Sheet
CPV363MK
1400
1200
VGE , Gate-to-Emitter Voltage (V)
V GE = 0V, f = 1MHz C ies = C ge + C gc , Cce SHORTED C res = C gc C oes = C ce + C gc
20
VCE = 400V I C = 14A
16
C, Capacitance (pF)
1000
Cies
800
12
Coes
600
8
400
4
200
Cres
A
1 10 100
0
0 0 10 20 30
A
40
VCE, Collector-to-Emitter Voltage (V)
Qg , Total Gate Charge (nC)
Fig. 7 - Typical Capacitance vs. Collector-to-Emitter Voltage
Fig. 8 - Typical Gate Charge vs. Gate-to-Emitter Voltage
0.41
Total Switching Losses (mJ)
0.39
Total Switching Losses (mJ)
0.40
VCC VGE TC IC
= 480V = 15V = 25C = 6.0A
10
RG = 23 V GE = 15V V CC = 480V
I C = 12A
1
0.38
0.37
I C = 6.0A I C = 3.0A
0.36
0.35
0.34 0 10 20 30 40 50
A
60
0.1 -60 -40 -20 0 20 40 60 80
A
100 120 140 160
R G , Gate Resistance ()
TC , Case Temperature (C)
Fig. 9 - Typical Switching Losses vs. Gate Resistance
Fig. 10 - Typical Switching Losses vs. Case Temperature
C-975
To Order
Previous Datasheet
Index
Next Data Sheet
CPV363MK
1.6
1.2
IC , Collector-to-Emitter Current (A)
Total Switching Losses (mJ)
RG TC V CC V GE
= 23 = 150C = 480V = 15V
100
VGE = 20V TJ = 125C
SAFE OPERATING AREA
10
0.8
0.4
0.0 0 2 4 6 8 10 12
A
14
1 1 10 100
A
1000
I C , Collector-to-Emitter Current (A)
VCE, Collector-to-Emitter Voltage (V)
Fig. 11 - Typical Switching Losses vs. Collector-to-Emitter Current
100
Fig. 12 - Turn-Off SOA
Instantaneous Forward Current - I F (A)
TJ = 150C
10
TJ = 125C TJ = 25C
1 0.4
0.8
1.2
1.6
2.0
2.4
Forward Voltage Drop - V FM (V)
Fig. 13 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current
C-976
To Order
Previous Datasheet
Index
Next Data Sheet
CPV363MK
160 100
VR = 200V TJ = 125C TJ = 25C
120
VR = 200V TJ = 125C TJ = 25C
I F = 24A I F = 12A
80
I IRRM - (A)
I F = 24A
10
t rr - (ns)
I F = 12A IF = 6.0A
I F = 6.0A
40
0 100
di f /dt - (A/s)
1000
1 100
di f /dt - (A/s)
1000
Fig. 14 - Typical Reverse Recovery vs. dif/dt
Fig. 15 - Typical Recovery Current vs. dif/dt
600
10000
VR = 200V TJ = 125C TJ = 25C
VR = 200V TJ = 125C TJ = 25C
400
di(rec)M/dt - (A/s)
1000
Q RR - (nC)
IF = 6.0A
I F = 24A I F = 12A
I F = 12A
100
200
IF = 6.0A
I F = 24A
0 100
di f /dt - (A/s)
1000
10 100
1000
di f /dt - (A/s)
Fig. 16 - Typical Stored Charge vs. dif/dt
Fig. 17 - Typical di(rec)M/dt vs. dif/dt
C-977
To Order
Previous Datasheet
Index
Next Data Sheet
CPV363MK
90% Vge Same type device as D.U.T. +Vge
Vce
80% of Vce
430F D.U.T.
Ic
10% Vce Ic
90% Ic 5% Ic
td(off)
tf
Eoff =
Fig. 18a - Test Circuit for Measurement of ILM, Eon, Eoff(diode) , trr, Qrr, Irr, td(on), tr, td(off), tf
t1 t2
t1+5S Vce ic dt t1
Fig. 18b - Test Waveforms for Circuit of Fig. 18a, Defining
Eoff, td(off), tf
GATE VOLTAGE D.U.T. 10% +Vg +Vg tx 10% Vcc Vce Vcc 10% Ic 90% Ic DUT VOLTAGE AND CURRENT Ipk Ic DIODE RECOVERY WAVEFORMS td(on) tr 5% Vce t2 Eon = Vce ie dt t1 t2 DIODE REVERSE RECOVERY ENERGY t3 10% Irr Vcc Vpk Irr trr Ic Qrr =
trr id dt tx
t4 Erec = Vd id dt t3
t1
t4
Fig. 18c - Test Waveforms for Circuit of Fig. 18a,
Defining E on, td(on), tr
Fig. 18d - Test Waveforms for Circuit of Fig. 18a,
Defining E rec, trr, Qrr, Irr
Refer to Section D for the following: Appendix D: Section D - page D-6 Fig. 18e - Macro Waveforms for Test Circuit of Fig. 18a Fig. 19 - Clamped Inductive Load Test Circuit Fig. 20 - Pulsed Collector Current Test Circuit Package Outline 5 - IMS-2 Package (13 pins)
C-978
Section D - page D-14
To Order

▲Up To Search▲

Price & Availability of CPV363MK

	To Download CPV363MK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .