View BULD1101ET4_1222204.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

BULD1101E
High voltage fast-switching NPN Power Transistor
General features

High voltage capability Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation Very high switching speed In compliance with the 2002/93/EC European Directive
3 1
DPAK TO-252 IPAK TO-251
1
2
3
Description
The device is manufactured using high voltage Multi-Epitaxial Planar technology for high switching speeds and high voltage capability. Thanks to an increased intermediate layer, it has an intrinsic ruggedness which enables the transistor to withstand an high collector current level during breakdown condition, without using the transil protection usually necessary in typical converters for lamp ballast.
Internal schematic diagram
Applications
Electronic ballast for fluorescent lighting
Order codes
Part number BULD1101ET4 BULD1101E-1 Marking BULD1101E BULD1101E Package DPAK IPAK Packaging Tape & reel Tube
May 2007
Rev 2
1/11
www.st.com 11
Electrical ratings
BULD1101E
1
Electrical ratings
Table 1.
Symbol VCES VCEO VEBO IC ICM IB IBM Ptot Tstg TJ
Absolute maximum rating
Parameter Collector-emitter voltage (V BE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current (tP < 5ms) Base current Base peak current (tP < 5ms) Total dissipation at T c = 25C Storage temperature Max. operating junction temperature Value 1100 450 12 3 6 1.5 3 35 -65 to 150 150 Unit V V V A A A A W C C
Table 2.
Symbol Rthj-case Rthj-amb
Thermal data
Parameter Thermal resistance junction-case Thermal resistance junction-amb __max __max Value 3.57 100 Unit C/W C/W
2/11
BULD1101E
Electrical characteristics
2
Electrical characteristics
(Tcase = 25C unless otherwise specified) Table 3.
Symbol ICES
Electrical characteristics
Parameter Test conditions Min. Typ. Max. 100 Unit A
Collector cut-off current VCE =1100V (VBE =0V) Emitter-base breakdown voltage (IC = IE =1mA 0) IC =100mA 450 IC =1A IC =1A IC =1A IB =0.2A IB =0.2A IB =0.2A 20 23 6 4 38 44 10 7 TJ=125C 0.25 0.6 12
V(BR)EBO
24
V
Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) VCE(sat) (1) Collector-emitter saturation voltage Base-emitter saturation voltage
V 1 1.5 1.5 80 85 18 16 V V V
VBE(sat) (1)
hFE
DC current gain
IC =0.25A VCE =5V IC =0.25A VCE =5V T J=125C VCE =5V IC =2A IC =2A VCE =5V T J=125C IC =2.5A VCC =125V VBE(off) =-5V L =2mH IBR 2.5A
ts tf Ear
Resistive load Storage time Fall time Repetitive avalanche energy
IB1 = -IB2 =0.5A tp = 300s (see fig.10) C =1.8nF (see fig.11) 6 400
2 700
s ns mJ
Note (1) Pulsed duration = 300s, duty cycle 1.5%
3/11
Electrical characteristics
BULD1101E
2.1
Typical characteristic
Figure 1. Safe operating area Figure 2. Derating curve
Figure 3.
Output characteristics
Figure 4.
Collector-emitter saturation voltage
Figure 5.
Base-emitter saturation voltage
Figure 6.
DC current gain
4/11
BULD1101E Figure 7. DC current gain Figure 8.
Electrical characteristics Resistive load switching times
Figure 9.
Reverse biased safe operating area
5/11
Electrical characteristics
BULD1101E
2.2
Test circuit
Figure 10. Resistive load switching test circuit
Figure 11. Energy rating test circuit
6/11
BULD1101E
Package mechanical data
3
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
7/11
Package mechanical data
BULD1101E
TO-252 (DPAK) MECHANICAL DATA
DIM. MIN. A A1 A2 B B2 C C2 D E G H L2 L4 V2 0.60 0o 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 0.8 1.00 8o 0.024 0o mm TYP. MAX. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 MIN. 0.087 0.035 0.001 0.025 0.204 0.018 0.019 0.236 0.252 0.173 0.368 0.031 0.039 0o inch TYP. MAX. 0.094 0.043 0.009 0.035 0.213 0.024 0.024 0.244 0.260 0.181 0.398
P032P_B
8/11
BULD1101E
Package mechanical data
TO-251 (IPAK) MECHANICAL DATA
DIM. A A1 A3 B B2 B3 B5 B6 C C2 D E G H L L1 L2 V1 0.45 0.48 6.00 6.40 4.40 15.90 9.00 0.80 0.80 10o 0.30 0.95 0.60 0.60 6.20 6.60 4.60 16.30 9.40 1.20 1.00 0.018 0.019 0.237 0.252 0.173 0.626 0.354 0.031 0.031 10o mm MIN. 2.20 0.90 0.70 0.64 5.20 TYP. MAX. 2.40 1.10 1.30 0.90 5.40 0.85 0.012 0.037 0.024 0.024 0.244 0.260 0.181 0.642 0.370 0.047 0.039 MIN. 0.087 0.035 0.028 0.025 0.204 inch TYP. MAX. 0.094 0.043 0.051 0.035 0.213 0.033
P032N_E
9/11
Revision history
BULD1101E
4
Revision history
Table 4.
Date 20-Apr-2003 07-May-2007
Revision history
Revision 1 2 Initial release. The document has been reformatted. Changes
10/11
BULD1101E
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
11/11

▲Up To Search▲

Price & Availability of BULD1101ET4

	To Download BULD1101ET4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .