![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
4.0X0.8mm RIGHT ANGLE SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APJKA4008RWC/A WHITE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. z4.0mmx0.8mm RIGHT ANGLE SMT LED, 1.4mm THICKNESS. zLOW POWER CONSUMPTION. z WIDE VIEWING ANGLE. zIDEAL FOR BACKLIGHT AND INDICATOR. zPACKAGE : 2000PCS / REEL. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zMOISTURE SENSITIVITY LEVEL : LEVEL 4. zTYP. COLOR TEMPERATURE:6500K CIE1931(WHITE). Applications z traffic signaling. z backlighting (illuminated advertising , general lighting). z interior and exterior automotive lighting. z reading lamps. z substitution of micro incandescent lamps. z signal and symbol luminaire for orientation. z marker lights (e.g. steps, exit ways, etc). z decorative and entertainment lighting. architectural lighting. zELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. zCOLOR COORDINATES:X=0.33,Y=0.34 ACC. TO zOPTICAL EFFICIENCY:10.5 lm/W(TYP.) zCOLOR REPRODUCTION INDEX:80 zRoHS COMPLIANT. z indoor and outdoor commercial and residential Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG3649 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Z.Z.YANG PAGE: 1 OF 7 ERP:1204000755 Selection Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20 mA Min. APJKA4008RWC/A WHITE (InGaN) WATER CLEAR 70 Typ. 180 Note2 -v (mlm) @ 20 mA Typ. 700 Note3 Viewing Note1 Angle 21/2 90 Absolute Maximum Ratings at TA=25C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Rth JS Value 114 5 110 -40 To +85 -40 To +100 30 100 400 160 Unit mW V C C C mA mA C/W C/W Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size16 mm 2 per pad), Electrical / Optical Characteristics at TA=25C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 Temperature coefficient of x IF=20mA, -10C^T^100C [Typ.] Temperature coefficient of y IF=20mA, -10C^T^100C [Typ.] Temperature coefficient of VF IF=20mA, -10C^T^100C [Typ.] VF Note2 Symbol X Y Note1 Value 0.33 0.34 2.7 3.3 3.8 0.01 Unit - Note1 V Reverse Current (VR=5V) A 10-3 /C 10-3 /C TCy -0.2 TCV -2.5 mV/C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of 0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of 0.1V. SPEC NO: DSAG3649 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Z.Z.YANG PAGE: 2 OF 7 ERP:1204000755 Brightness codes luminous Intensity Iv(mcd) @ 20 mA Code. M N P Q Min. 70 110 180 280 Note1 -v(mlm) @ 20 mA Max. 130 220 320 420 Typ. 300 480 710 960 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APJKA4008RWC/A SPEC NO: DSAG3649 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Z.Z.YANG PAGE: 3 OF 7 ERP:1204000755 APJKA4008RWC/A SPEC NO: DSAG3649 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Z.Z.YANG PAGE: 4 OF 7 ERP:1204000755 Color Codes SPEC NO: DSAG3649 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Z.Z.YANG PAGE: 5 OF 7 ERP:1204000755 APJKA4008RWC/A Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAG3649 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Z.Z.YANG PAGE: 6 OF 7 ERP:1204000755 PACKING & LABEL SPECIFCATIONS APJKA4008RWC/A SPEC NO: DSAG3649 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAY/23/2006 DRAWN: Z.Z.YANG PAGE: 7 OF 7 ERP:1204000755 |
Price & Availability of APJKA4008RWC-A
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |