|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
INTEGRATED CIRCUITS DATA SHEET 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger Product specification Supersedes data of 2003 Nov 27 2004 Oct 18 Philips Semiconductors Product specification Inverting Schmitt trigger FEATURES * Symmetrical output impedance * High noise immunity * ESD protection: - HBM EIA/JESD22-A114-B exceeds 2000 V - MM EIA/JESD22-A115-A exceeds 200 V - CDM EIA/JESD22-C101 exceeds 500 V. * Low power dissipation * Balanced propagation delays * Multiple package options * Specified from -40 C to +85 C and -40 C to +125 C. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 C; tr = tf 3.0 ns. 74AHC3G14; 74AHCT3G14 APPLICATIONS * Wave and pulse shapers * Astable multivibrators * Monostable multivibrators. DESCRIPTION The 74AHC3G/AHCT3G14 is a high-speed Si-gate CMOS device. The 74AHC3G/AHCT3G14 provides three inverting buffers with Schmitt-trigger action. These devices are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. TYPICAL SYMBOL tPHL/tPLH CI CPD Notes 1. CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in Volts; N = number of inputs switching; (CL x VCC2 x fo) = sum of the outputs. 2. The condition is VI = GND to VCC. FUNCTION TABLE See note 1. INPUT nA L H Note 1. H = HIGH voltage level; L = LOW voltage level. 2004 Oct 18 2 OUTPUT nY H L PARAMETER propagation delay A to Y input capacitance power dissipation capacitance CL = 15 pF; f = 1 MHz; notes 1 and 2 CONDITIONS AHC3G14 CL = 15 pF; VCC = 5 V 3.2 1.5 10 AHCT3G14 4.1 1.5 12 ns pF pF UNIT Philips Semiconductors Product specification Inverting Schmitt trigger ORDERING INFORMATION 74AHC3G14; 74AHCT3G14 PACKAGE TYPE NUMBER 74AHC3G14DP 74AHCT3G14DP 74AHC3G14DC 74AHCT3G14DC 74AHC3G14GM 74AHCT3G14GM PINNING PIN 1 2 3 4 5 6 7 8 1A 3Y 2A GND 2Y 3A 1Y VCC SYMBOL data input data output data input ground (0 V) data output data input data output supply voltage DESCRIPTION TEMPERATURE RANGE -40 C to +125 C -40 C to +125 C -40 C to +125 C -40 C to +125 C -40 C to +125 C -40 C to +125 C PINS 8 8 8 8 8 8 PACKAGE TSSOP8 TSSOP8 VSSOP8 VSSOP8 XSON8 XSON8 MATERIAL plastic plastic plastic plastic plastic plastic CODE SOT505-2 SOT505-2 SOT765-1 SOT765-1 SOT833-1 SOT833-1 MARKING A14 C14 A14 C14 A14 C14 3G14 1A 1 8 VCC 1A 3Y 2A GND 1 2 3 4 001aab833 8 7 VCC 1Y 3A 2Y 3G14 6 5 3Y 2 7 1Y 2A 3 6 3A GND 4 5 2Y 001aab834 Transparent top view Fig.1 Pin configuration TSSOP8 and VSSOP8. Fig.2 Pin configuration XSON8. 2004 Oct 18 3 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 handbook, halfpage handbook, halfpage 1 7 1 1A 1Y 7 2 3Y 3A 6 6 2 3 2A 2Y 5 3 5 MNA740 MNA741 Fig.3 Logic symbol. Fig.4 IEC logic symbol. handbook, halfpage A Y MNA025 Fig.5 Logic diagram (one driver). 2004 Oct 18 4 Philips Semiconductors Product specification Inverting Schmitt trigger RECOMMENDED OPERATING CONDITIONS 74AHC3G14; 74AHCT3G14 74AHC3G SYMBOL VCC VI VO Tamb PARAMETER supply voltage input voltage output voltage operating ambient temperature see DC and AC characteristics per device CONDITIONS MIN. 2.0 0 0 -40 74AHCT3G UNIT TYP. MAX. 5.0 - - +25 5.5 5.5 VCC V V V TYP. MAX. MIN. 5.0 - - +25 5.5 5.5 VCC 4.5 0 0 +125 -40 +125 C LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). SYMBOL VCC VI IIK IOK IO ICC, IGND Tstg PD Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. PARAMETER supply voltage input voltage input diode current output diode current output source or sink current VCC or GND current storage temperature power dissipation Tamb = -40 C to +125 C VI < -0.5 V VO < -0.5 V or VO > VCC + 0.5 V; note 1 -0.5 V < VO < VCC + 0.5 V CONDITIONS MIN. -0.5 -0.5 - - - - -65 - MAX. +7.0 +7.0 -20 20 25 75 +150 250 UNIT V V mA mA mA mA C mW 2004 Oct 18 5 Philips Semiconductors Product specification Inverting Schmitt trigger DC CHARACTERISTICS 74AHC3G14; 74AHCT3G14 Type 74AHC3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL Tamb = 25 C VOH HIGH-level output voltage VI = VIH or VIL IO = -50 A IO = -50 A IO = -50 A IO = -4.0 mA IO = -8.0 mA VOL LOW-level output voltage VI = VIH or VIL IO = 50 A IO = 50 A IO = 50 A IO = 4.0 mA IO = 8.0 mA ILI ICC CI input leakage current quiescent supply current input capacitance VI = VCC or GND VI = VCC or GND; IO = 0 A 2.0 3.0 4.5 3.0 4.5 5.5 5.5 - - - - - - - - - 0 0 0 - - - - 1.5 0.1 0.1 0.1 0.36 0.36 0.1 1.0 10 V V V V V A A pF 2.0 3.0 4.5 3.0 4.5 1.9 2.9 4.4 2.58 3.94 2.0 3.0 4.5 - - - - - - - V V V V V PARAMETER OTHER VCC (V) MIN. TYP. MAX. UNIT Tamb = -40 C to +85 C VOH HIGH-level output voltage VI = VIH or VIL IO = -50 A IO = -50 A IO = -50 A IO = -4.0 mA IO = -8.0 mA VOL LOW-level output voltage VI = VIH or VIL IO = 50 A IO = 50 A IO = 50 A IO = 4.0 mA IO = 8.0 mA ILI ICC CI input leakage current quiescent supply current input capacitance VI = VCC or GND VI = VCC or GND; IO = 0 A 2.0 3.0 4.5 3.0 4.5 5.5 5.5 - - - - - - - - - - - - - - - - - 0.1 0.1 0.1 0.44 0.44 1.0 10 10 V V V V V A A pF 2.0 3.0 4.5 3.0 4.5 1.9 2.9 4.4 2.48 3.8 - - - - - - - - - - V V V V V 2004 Oct 18 6 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 TEST CONDITIONS SYMBOL PARAMETER OTHER Tamb = -40 C to +125 C VOH HIGH-level output voltage VI = VIH or VIL IO = -50 A IO = -50 A IO = -50 A IO = -4.0 mA IO = -8.0 mA VOL LOW-level output voltage VI = VIH or VIL IO = 50 A IO = 50 A IO = 50 A IO = 4.0 mA IO = 8.0 mA ILI ICC CI input leakage current quiescent supply current input capacitance VI = VCC or GND VI = VCC or GND; IO = 0 A 2.0 3.0 4.5 3.0 4.5 5.5 5.5 - - - - - - - - - - - - - - - - - 0.1 0.1 0.1 0.55 0.55 2.0 40 10 V V V V V A A pF 2.0 3.0 4.5 3.0 4.5 1.9 2.9 4.4 2.40 3.70 - - - - - - - - - - V V V V V VCC (V) MIN. TYP. MAX. UNIT 2004 Oct 18 7 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 Type 74AHCT3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL Tamb = 25 C VOH HIGH-level output voltage VI = VIH or VIL IO = -50 A IO = -8.0 mA VOL LOW-level output voltage VI = VIH or VIL IO = 50 A IO = 8.0 mA ILI ICC ICC CI input leakage current quiescent supply current VI = VIH or VIL VI = VCC or GND; IO = 0 A 4.5 4.5 5.5 5.5 5.5 - - - - - - - 0 - - - - 1.5 0.1 0.36 0.1 1.0 1.35 10 V V A A mA pF 4.5 4.5 4.4 3.94 4.5 - - - V V PARAMETER OTHER VCC (V) MIN. TYP. MAX. UNIT additional quiescent supply VI = 3.4 V; other inputs at current per input pin VCC or GND; IO = 0 A input capacitance Tamb = -40 C to +85 C VOH HIGH-level output voltage VI = VIH or VIL IO = -50 A IO = -8.0 mA VOL LOW-level output voltage VI = VIH or VIL IO = 50 A IO = 8.0 mA ILI ICC ICC CI input leakage current quiescent supply current VI = VIH or VIL VI = VCC or GND; IO = 0 A 4.5 4.5 5.5 5.5 5.5 - - - - - - - - - - - - - 0.1 0.44 1.0 10 1.5 10 V V A A mA pF 4.5 4.5 4.4 3.8 - - - - V V additional quiescent supply VI = 3.4 V; other inputs at current per input pin VCC or GND; IO = 0 A input capacitance Tamb = -40 C to +125 C VOH HIGH-level output voltage VI = VIH or VIL IO = -50 A IO = -8.0 mA VOL LOW-level output voltage VI = VIH or VIL IO = 50 A IO = 8.0 mA ILI ICC ICC CI input leakage current quiescent supply current VI = VIH or VIL VI = VCC or GND; IO = 0 A 4.5 4.5 5.5 5.5 5.5 - - - - - - - - - - - - - 0.1 0.55 2.0 40 1.5 10 V V A A mA pF 4.5 4.5 4.4 3.70 - - - - V V additional quiescent supply VI = 3.4 V; other inputs at current per input pin VCC or GND; IO = 0 A input capacitance 2004 Oct 18 8 Philips Semiconductors Product specification Inverting Schmitt trigger TRANSFER CHARACTERISTICS 74AHC3G14; 74AHCT3G14 Type 74AHC3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL Tamb = 25 C VT+ positive-going threshold see Figs 6 and 7 3.0 4.5 5.5 VT- negative-going threshold see Figs 6 and 7 3.0 4.5 5.5 VH hysteresis (VT+ - VT-) see Figs 6 and 7 3.0 4.5 5.5 Tamb = -40 C to +85 C VT+ positive-going threshold see Figs 6 and 7 3.0 4.5 5.5 VT- negative-going threshold see Figs 6 and 7 3.0 4.5 5.5 VH hysteresis (VT+ - VT-) see Figs 6 and 7 3.0 4.5 5.5 Tamb = -40 C to +125 C VT+ positive-going threshold see Figs 6 and 7 3.0 4.5 5.5 VT- negative-going threshold see Figs 6 and 7 3.0 4.5 5.5 VH hysteresis (VT+ - VT-) see Figs 6 and 7 3.0 4.5 5.5 - - - 0.9 1.35 1.65 0.25 0.35 0.45 - - - - - - - - - 2.2 3.15 3.85 - - - 1.2 1.4 1.6 V V V V V V V V V - - - 0.9 1.35 1.65 0.3 0.4 0.5 - - - - - - - - - 2.2 3.15 3.85 - - - 1.2 1.4 1.6 V V V V V V V V V - - - 0.9 1.35 1.65 0.3 0.4 0.5 - - - - - - - - - 2.2 3.15 3.85 - - - 1.2 1.4 1.6 V V V V V V V V V PARAMETER WAVEFORMS VCC (V) MIN. TYP. MAX. UNIT 2004 Oct 18 9 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 Type 74AHCT3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL Tamb = 25 C VT+ VT- VH positive-going threshold negative-going threshold hysteresis (VT+ - VT-) see Figs 6 and 7 see Figs 6 and 7 see Figs 6 and 7 4.5 5.5 4.5 5.5 4.5 5.5 Tamb = -40 C to +85 C VT+ VT- VH positive-going threshold negative-going threshold hysteresis (VT+ - VT-) see Figs 6 and 7 see Figs 6 and 7 see Figs 6 and 7 4.5 5.5 4.5 5.5 4.5 5.5 Tamb = -40 C to +125 C VT+ VT- VH positive-going threshold negative-going threshold hysteresis (VT+ - VT-) see Figs 6 and 7 see Figs 6 and 7 see Figs 6 and 7 4.5 5.5 4.5 5.5 4.5 5.5 - - 0.5 0.6 0.35 0.35 - - - - - - 2.0 2.0 - - 1.4 1.6 V V V V V V - - 0.5 0.6 0.4 0.4 - - - - - - 2.0 2.0 - - 1.4 1.6 V V V V V V - - 0.5 0.6 0.4 0.4 - - - - - - 2.0 2.0 - - 1.4 1.6 V V V V V V PARAMETER WAVEFORMS VCC (V) MIN. TYP. MAX. UNIT 2004 Oct 18 10 Philips Semiconductors Product specification Inverting Schmitt trigger TRANSFER CHARACTERISTIC WAVEFORMS 74AHC3G14; 74AHCT3G14 handbook, halfpage VO handbook, halfpage VI VT+ VT- VH VO VH VT- VT+ VI MNA026 MNA027 Fig.6 Transfer characteristic. Fig.7 Definitions of VT+, VT- and VH. handbook, halfpage 1.5 MNA401 I CC (mA) 1 0.5 0 0 1 2 VI (V) 3 VCC = 3.0 V. Fig.8 Typical AHC3G14 transfer characteristics. 2004 Oct 18 11 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 MNA402 handbook, halfpage 5 I CC (mA) handbook, halfpage 8 MNA403 4 I CC (mA) 6 3 4 2 1 2 0 0 1 2 3 4 V (V) 5 I 0 0 2 4 VI (V) 6 VCC = 4.5 V. VCC = 5.5 V. Fig.9 Typical AHC3G14 transfer characteristics. Fig.10 Typical AHC3G14 transfer characteristics. MNA404 handbook, halfpage 5 I CC (mA) handbook, halfpage 8 MNA405 I CC (mA) 6 4 3 4 2 2 1 0 0 1 2 3 4 V (V) 5 I 0 0 2 4 VI (V) 6 VCC = 4.5 V. VCC = 5.5 V. Fig.11 Typical AHCT3G14 transfer characteristics. Fig.12 Typical AHCT3G14 transfer characteristics. 2004 Oct 18 12 Philips Semiconductors Product specification Inverting Schmitt trigger AC CHARACTERISTICS Type 74AHC3G14 GND = 0 V; tr = tf 3.0 ns. 74AHC3G14; 74AHCT3G14 TEST CONDITIONS SYMBOL Tamb = 25 C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 3.3 3.0 to 3.6 5.0 4.5 to 5.5 Tamb = -40 C to +85 C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 3.0 to 3.6 4.5 to 5.5 Tamb = -40 C to +125 C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 3.0 to 3.6 4.5 to 5.5 15 50 15 50 1.0 1.0 1.0 1.0 - - - - 16.5 20.5 11.0 13.5 ns ns ns ns 15 50 15 50 1.0 1.0 1.0 1.0 - - - - 15.0 18.5 10.0 12.0 ns ns ns ns 15 50 15 50 15 50 15 50 - - - - - - - - 4.2 6.0 - - 3.2 4.6 - - - - 12.8 16.3 - - 8.6 10.6 ns ns ns ns ns ns ns ns PARAMETER WAVEFORMS VCC (V) CL (pF) MIN. TYP. MAX. UNIT 2004 Oct 18 13 Philips Semiconductors Product specification Inverting Schmitt trigger Type 74AHCT3G14 GND = 0 V; tr = tf 3.0 ns. 74AHC3G14; 74AHCT3G14 TEST CONDITIONS SYMBOL Tamb = 25 C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 5 4.5 to 5.5 Tamb = -40 C to +85 C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 4.5 to 5.5 15 50 Tamb = -40 C to +125 C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 4.5 to 5.5 15 50 1.0 1.0 - - 9.0 11.0 ns ns 1.0 1.0 - - 8.0 10.0 ns ns 15 50 15 50 - - - - 4.1 5.9 - - - - 7.0 8.5 ns ns ns ns PARAMETER WAVEFORMS VCC (V) CL (pF) MIN. TYP. MAX. UNIT 2004 Oct 18 14 Philips Semiconductors Product specification Inverting Schmitt trigger AC WAVEFORMS 74AHC3G14; 74AHCT3G14 handbook, halfpage VI VM GND t PHL VOH t PLH nA input nY output VOL VM MNA344 FAMILY AHC3G VI INPUT REQUIREMENTS GND to VCC VM INPUT 1.5 V VM OUTPUT 50 % VCC 50 % VCC 50 % VCC AHCT3G GND to 3.0 V Fig.13 The input (nA) to output (nY) propagation delays. handbook, halfpage VCC VI D.U.T. RT CL MNA101 PULSE GENERATOR VO Definitions for test circuit: CL = Load capacitance including jig and probe capacitance. (See Chapter "AC characteristics" for values). RT = Termination resistance should be equal to the output impedance Zo of the pulse generator. Fig.14 Load circuitry for switching times. 2004 Oct 18 15 Philips Semiconductors Product specification Inverting Schmitt trigger APPLICATION INFORMATION The slow input rise and fall times cause additional power dissipation. This can be calculated using the following formula: Pad = fi x (tr x ICC(AV) + tf x ICC(AV)) x VCC Where: Pad = additional power dissipation (W); fi = input frequency (MHz); tr = input rise time (ns); 10 % to 90 %; tf = input fall time (ns); 90 % to 10 %; ICC(AV) = average additional supply current (A). Average ICC differs with positive or negative input transitions, as shown in Figs 15 and 16. For AHC3G/AHCT3G14 used in relaxation oscillator circuit, see Fig.17. Remark to the application information All values given are typical unless otherwise specified. 0 0 50 100 74AHC3G14; 74AHCT3G14 handbook, halfpage 200 MNA036 ICC(AV) (A) 150 positive-going edge negative-going edge 2.0 4.0 VCC (V) 6.0 Linear change of VI between 0.1VCC to 0.9VCC. Fig.15 Average ICC for AHC3G Schmitt-trigger devices. handbook, halfpage 200 MNA058 ICC(AV) (A) 150 positive-going edge handbook, halfpage R C 100 MNA035 50 negative-going edge 0 0 2 4 VCC (V) 6 For AHC3G: 1 1 f = -- -------------------------T 0.55 x RC 1 1 f = -- -------------------------T 0.60 x RC For AHCT3G: Linear change of VI between 0.1VCC to 0.9VCC. Fig.16 Average ICC for AHCT3G Schmitt-trigger devices. Fig.17 Relaxation oscillator using the AHC3G/AHCT3G14. 2004 Oct 18 16 Philips Semiconductors Product specification Inverting Schmitt trigger PACKAGE OUTLINES 74AHC3G14; 74AHCT3G14 TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm SOT505-2 D E A X c y HE vMA Z 8 5 A pin 1 index A2 A1 (A3) Lp L 1 e bp 4 wM detail X 0 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1.1 A1 0.15 0.00 A2 0.95 0.75 A3 0.25 bp 0.38 0.22 c 0.18 0.08 D(1) 3.1 2.9 E(1) 3.1 2.9 e 0.65 HE 4.1 3.9 L 0.5 Lp 0.47 0.33 v 0.2 w 0.13 y 0.1 Z(1) 0.70 0.35 8 0 Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT505-2 REFERENCES IEC JEDEC --JEITA EUROPEAN PROJECTION ISSUE DATE 02-01-16 2004 Oct 18 17 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm SOT765-1 D E A X c y HE vMA Z 8 5 Q A pin 1 index A2 A1 (A3) Lp L 1 e bp 4 wM detail X 0 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1 A1 0.15 0.00 A2 0.85 0.60 A3 0.12 bp 0.27 0.17 c 0.23 0.08 D(1) 2.1 1.9 E(2) 2.4 2.2 e 0.5 HE 3.2 3.0 L 0.4 Lp 0.40 0.15 Q 0.21 0.19 v 0.2 w 0.13 y 0.1 Z(1) 0.4 0.1 8 0 Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT765-1 REFERENCES IEC JEDEC MO-187 JEITA EUROPEAN PROJECTION ISSUE DATE 02-06-07 2004 Oct 18 18 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 0.95 x 1.95 x 0.5 mm SOT833-1 1 2 3 b 4 4x L (2) L1 e 8 e1 7 e1 6 e1 5 8x (2) A A1 D E terminal 1 index area 0 DIMENSIONS (mm are the original dimensions) UNIT mm A (1) max 0.5 A1 max 0.04 b 0.25 0.17 D 2.0 1.9 E 1.0 0.9 e 0.6 e1 0.5 L 0.35 0.27 L1 0.40 0.32 1 scale 2 mm Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. OUTLINE VERSION SOT833-1 REFERENCES IEC --JEDEC MO-252 JEITA --EUROPEAN PROJECTION ISSUE DATE 04-07-15 04-07-22 2004 Oct 18 19 Philips Semiconductors Product specification Inverting Schmitt trigger DATA SHEET STATUS LEVEL I DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2)(3) Development 74AHC3G14; 74AHCT3G14 DEFINITION This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). II Preliminary data Qualification III Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 2004 Oct 18 20 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. (c) Koninklijke Philips Electronics N.V. 2004 SCA76 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R44/02/pp21 Date of release: 2004 Oct 18 Document order number: 9397 750 13741 |
Price & Availability of 74AHCT3G14GM |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |