 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PHOTOCOUPLER PS2801-1,PS2801-4 HIGH ISOLATION VOLTAGE SSOP PHOTOCOUPLER -NEPOC Series- DESCRIPTION The PS2801-1 and PS2801-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications. This package has shield effect to cut off ambient light. FEATURES * High isolation voltage (BV = 2 500 Vr.m.s.) * Small and thin package (4,16-pin SSOP, Pin pitch 1.27 mm) * High collector to emitter voltage (VCEO = 80 V) * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) * Ordering number of tape product: PS2801-1-F3, F4, PS2801-4-F3, F4 * Pb-Free product * Safety standards: PS2801-1, -4 * UL approved: File No. E72422 * BSI approved: No. 8188, 8189 * DIN EN60747-5-2 (VDE0884 Part2) approved (Option) PS2801-4 PIN CONNECTION (Top View) PS2801-1 43 1. Anode 2. Cathode 3. Emitter 4. Collector 12 16 15 14 13 12 11 10 9 APPLICATIONS * Programmable logic controllers * Measuring instruments * Power supply * Hybrid IC 12345678 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode Cathode Emitter Collector Document No. PN10251EJ02V0DS (2nd edition) Date Published April 2005 CP(K) The mark shows major revised points. PS2801-1,PS2801-4 PACKAGE DIMENSIONS (UNIT: mm) PS2801-1 2.70.3 10.30.3 PS2801-4 7.00.3 7.00.3 0.15+0.10 -0.05 2.00.1 0.10.1 0.50.3 1.27 0.40.1 0.12 M 2.0+0.3 -0.2 0.15+0.10 -0.05 0.10.1 4.4 4.4 0.40+0.10 -0.05 0.12 M 1.27 0.50.3 MARKING EXAMPLE PS2801-1 PS2801-4 1 401 4 01 *1 Assembly Lot No. 1 pin Mark PS2801-4 N 401 Country Assembled Type Number Assembly Lot *1 Last number of type No. : 1 N 4 01 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code *1 For the external plating Pb-Free product, L is indicated at the second digit of the rank. Week Assembled Year Assembled (Last 1 Digit) *1 For external plating Pb-Free products, perform marking to indicate that these are Pb-Free products. 2 Data Sheet PN10251EJ02V0DS PS2801-1,PS2801-4 ORDERING INFORMATION Solder Plating Specification Solder contains lead Safety Standard Approval Standard products (UL approved) Application *1 Part Number PS2801-1 Part Number PS2801-1 PS2801-1-F3 PS2801-1-F4 PS2801-1-V PS2801-1-V-F3 PS2801-1-V-F4 PS2801-4 PS2801-4-F3 PS2801-4-F4 PS2801-4-V PS2801-4-V-F3 PS2801-4-V-F4 PS2801-1 PS2801-1-F3 PS2801-1-F4 PS2801-1-V PS2801-1-V-F3 PS2801-1-V-F4 PS2801-4 PS2801-4-F3 PS2801-4-F4 PS2801-4-V PS2801-4-V-F3 PS2801-4-V-F4 Order Number PS2801-1 PS2801-1-F3 PS2801-1-F4 PS2801-1-V PS2801-1-V-F3 PS2801-1-V-F4 PS2801-4 PS2801-4-F3 PS2801-4-F4 PS2801-4-V PS2801-4-V-F3 PS2801-4-V-F4 PS2801-1-A PS2801-1-F3-A PS2801-1-F4-A PS2801-1-V-A PS2801-1-V-F3-A PS2801-1-V-F4-A PS2801-4-A PS2801-4-F3-A PS2801-4-F4-A PS2801-4-V-A PS2801-4-V-F3-A PS2801-4-V-F4-A Packing Style 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel Standard products (UL approved) PS2801-4 Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) Pb-Free 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel Standard products (UL approved) PS2801-1 50 pcs (Tape 50 pcs cut) Embossed Tape 3 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel Standard products (UL approved) PS2801-4 Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10251EJ02V0DS 3 PS2801-1,PS2801-4 ABSOLUTE MAXIMUM RATINGS (Unless otherwise specified, TA = 25C) Parameter Symbol Ratings PS2801-1 Diode Forward Current (DC) Reverse Voltage Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Unit PS2801-4 50 6 mA V 0.8 80 1 80 6 50 1.2 120 mW/C mW/ch A V V mA/ch mW/C mW/ch Vr.m.s. C C IF VR PD/C PD IFP VCEO VECO IC 0.6 60 Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation PC/C PC BV TA Tstg Isolation Voltage *2 2 500 -55 to +100 -55 to +150 Operating Ambient Temperature Storage Temperature *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output. Pins 1-2 shorted together, 3-4 shorted together (PS2801-1). Pins 1-8 shorted together, 9-16 shorted together (PS2801-4). 4 Data Sheet PN10251EJ02V0DS PS2801-1,PS2801-4 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio *1 (IC/IF) Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 Symbol VF IR Ct ICEO CTR VCE(sat) RI-O CI-O tr tf IF = 5 mA VR = 5 V Conditions MIN. TYP. 1.1 MAX. 1.4 5 Unit V A pF V = 0 V, f = 1.0 MHz VCE = 80 V, IF = 0 mA IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 2 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 5 V, IC = 2 mA, RL = 100 10 11 15 100 80 600 0.3 nA % V 0.4 3 5 pF s *2 *1 CTR rank (PS2801-1 only) K : 300 to 600 (%) P : 150 to 300 (%) L : 100 to 300 (%) N : 80 to 600 (%) *2 Test circuit for switching time Pulse Input PW = 100 s Duty Cycle = 1/10 VCC IF VOUT 50 RL = 100 Data Sheet PN10251EJ02V0DS 5 PS2801-1,PS2801-4 TYPICAL CHARACTERISTICS (Unless otherwise specified, TA = 25C) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Transistor Power Dissipation PC (mW) 100 200 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE Diode Power Dissipation PD (mW) 75 PS2801-4 150 50 PS2801-1 0.6 mW/C 0.8 mW/C 100 PS2801-1 PS2801-4 1.2 mW/C 25 50 0 25 50 75 100 0 25 50 75 100 Ambient Temperature TA (C) Ambient Temperature TA ( C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 TA = +100C +60C +25C COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 70 60 Collector Current IC (mA) Forward Current IF (mA) 10 5 50 40 30 20 10 1 0.5 0C -25C -55C mA 50 mA 20 mA 0 1 IF = 5 mA 0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) 10 000 VCE = 80 V 40 V 24 V 10 V 5V COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 40 50 mA 20 mA Collector Current IC (mA) 10 5 1 000 10 mA 5 mA 2 mA IF = 1 mA 100 1 0.5 10 1 0.1 -50 -25 0 25 50 75 100 0 0.2 0.4 0.6 0.8 1.0 Ambient Temperature TA (C) Collector Saturation Voltage VCE(sat) (V) Remark The graphs indicate nominal characteristics. 6 Data Sheet PN10251EJ02V0DS PS2801-1,PS2801-4 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR CURRENT TRANSFER RATIO vs. FORWARD CURRENT Current Transfer Ratio CTR (%) 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 100 0.02 0.1 1.0 10 100 Ambient Temperature TA (C) Forward Current IF (mA) Normalized to 1.0 at TA = 25C, IF = 5 mA, VCE = 5 V 300 VCE = 5 V, n=3 250 200 150 100 50 Sample A B C SWITCHING TIME vs. LOAD RESISTANCE 100 VCC = 5 V, 50 IC = 2 mA, CTR = 236% Switching Time t ( s) 10 5 SWITCHING TIME vs. LOAD RESISTANCE 1 000 VCC = 5 V, IF = 5 mA, CTR = 236% tf ts 10 tr 1 td tr td ts 1 0.5 Switching Time t (s) tf 100 0.1 0.01 0.05 0.1 0.5 1 5 10 0.1 0.1 1 10 100 Load Resistance RL (k) Load Resistance RL (k) FREQUENCY RESPONSE IF = 5 mA, VCE = 5 V CTR (Relative Value) 1.2 LONG TERM CTR DEGRADATION TYP. 1.0 0.8 0.6 0.4 0.2 0 Normalized Gain Gv -5 -10 -15 -20 RL = 1 k 100 IF = 5 mA TA = 25C IF = 20 mA TA = 25C IF = 5 mA TA = 60C 0.5 1 2 5 10 20 300 50 100 200 500 0.0 10 102 103 Time (Hr) 104 105 Frequency f (kHz) Remark The graphs indicate nominal characteristics. Data Sheet PN10251EJ02V0DS 7 PS2801-1,PS2801-4 TAPING SPECIFICATIONS (UNIT: mm) Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5+0.1 -0 7.550.1 2.8 MAX. 7.50.1 16.00.3 0.3 1.550.1 4.00.1 2.850.1 2.30.1 Tape Direction PS2801-1-F3 PS2801-1-F4 1401 1401 1401 1401 Outline and Dimensions (Reel) 2.00.5 3302.0 2.00.5 13.00.2 R 1.0 21.00.8 1001.0 1401 1401 Packing: 3 500 pcs/reel 1401 1401 1401 1401 17.51.0 21.51.0 15.9 to 19.4 Outer edge of flange 8 Data Sheet PN10251EJ02V0DS PS2801-1,PS2801-4 Outline and Dimensions (Tape) 2.00.1 4.00.1 1.750.1 1.5+0.1 -0 2.8 MAX. 7.50.1 16.00.3 10.70.1 1.550.1 12.00.1 8.30.1 0.3 2.30.1 Tape Direction PS2801-4-F3 PS2801-4-F4 Outline and Dimensions (Reel) 2.00.5 3302.0 2.00.5 13.00.2 R 1.0 21.00.8 1001.0 17.51.0 21.51.0 Packing: 2 500 pcs/reel 15.9 to 19.4 Outer edge of flange Data Sheet PN10251EJ02V0DS 9 PS2801-1,PS2801-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) * Time (each pins) * Flux 350C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. 10 Data Sheet PN10251EJ02V0DS PS2801-1,PS2801-4 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10251EJ02V0DS 11 PS2801-1,PS2801-4 PROGRAMMABLE LOGIC CONTROLLERS EXAMPLE Purpose: In-out interface Xaxis Ya xi s Servo Motor Servo Motor Controller Sensor Amplifier Motor Controller Heater Controller Pulse Generator COM PS2801-1 PS2801-4 PD4050 AC.DC Servo Motor Driver Unit M TG PG Pulse Motor Driver Unit M CRT Computer Terminal PC Terminal Printer Power Supply Programmable Logic Controller Printer FDD Controller Memory Cassette 12 Data Sheet PN10251EJ02V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of PS2801-4
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |