 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Philips Semiconductors Product specification Rectifier diodes ultrafast FEATURES * Low forward volt drop * Fast switching * Soft recovery characteristic * Reverse surge capability * High thermal cycling performance * Isolated mounting tab BYR29F series SYMBOL QUICK REFERENCE DATA VR = 500 V/ 600 V/ 700 V / 800 V k 1 a 2 VF 1.5 V IF(AV) = 8 A trr 75 ns GENERAL DESCRIPTION Ultra-fast, epitaxial rectifier diodes intended for use as output rectifiers in high frequency switched mode power supplies. The BYR29F series is supplied in the conventional leaded SOD100 package. PINNING PIN 1 2 tab DESCRIPTION cathode anode isolated SOD100 case 1 2 LIMITING VALUES Limiting values in accordance with the Absolute Maximum System (IEC 134). SYMBOL VRRM VRWM VR IF(AV) IFRM IFSM PARAMETER Peak repetitive reverse voltage Crest working reverse voltage Continuous reverse voltage Average forward current 1 CONDITIONS BYR29F Ths 136 C MIN. -40 -500 500 500 500 MAX. -600 600 600 600 8 16 60 66 150 150 -700 700 700 700 -800 800 800 800 UNIT V V V A A A A C C Tstg Tj square wave; = 0.5; Ths 73 C Repetitive peak forward current t = 25 s; = 0.5; Ths 73 C Non-repetitive peak forward t = 10 ms current t = 8.3 ms sinusoidal; with reapplied VRRM(max) Storage temperature Operating junction temperature 1 Neglecting switching and reverse current losses September 1998 1 Rev 1.400 Philips Semiconductors Product specification Rectifier diodes ultrafast ISOLATION LIMITING VALUE & CHARACTERISTIC Ths = 25 C unless otherwise specified SYMBOL Visol PARAMETER Repetitive peak voltage from both terminals to external heatsink Capacitance from cathode to external heatsink CONDITIONS R.H. 65% ; clean and dustfree MIN. - BYR29F series TYP. MAX. 1500 UNIT V Cisol f = 1 MHz - 12 - pF THERMAL RESISTANCES SYMBOL Rth j-hs Rth j-a PARAMETER Thermal resistance junction to heatsink Thermal resistance junction to ambient CONDITIONS with heatsink compound without heatsink compound in free air. MIN. TYP. 55 MAX. 5.5 7.2 UNIT K/W K/W K/W ELECTRICAL CHARACTERISTICS Tj = 25 C unless otherwise stated SYMBOL VF IR Qs trr Irrm Vfr PARAMETER Forward voltage Reverse current Reverse recovery charge Reverse recovery time Peak reverse recovery current Forward recovery voltage CONDITIONS IF = 8 A; Tj = 150C IF = 20 A VR = VRRM VR = VRRM; Tj = 100 C IF = 2 A to VR 30 V; dIF/dt = 20 A/s IF = 1 A to VR 30 V; dIF/dt = 100 A/s IF = 10 A to VR 30 V; dIF/dt = 50 A/s; Tj = 100 C IF = 10 A; dIF/dt = 10 A/s MIN. TYP. 1.07 1.75 1.0 0.1 150 60 5.0 MAX. 1.50 1.95 10 0.2 200 75 6 UNIT V V A mA nC ns A V September 1998 2 Rev 1.400 Philips Semiconductors Product specification Rectifier diodes ultrafast BYR29F series I dI F dt F 15 PF / W Vo = 1.26 V Rs = 0.03 Ohms BYR29 Ths(max) / C a = 1.57 2.2 1.9 73 84 95 106 117 t rr time 10 4 5 2.8 Q I R I s 10% 100% 128 139 rrm 0 0 1 2 3 4 IF(AV) / A 5 6 7 150 8 Fig.1. Definition of trr, Qs and Irrm Fig.4. Maximum forward dissipation PF = f(IF(AV)); sinusoidal current waveform where a = form factor = IF(RMS) / IF(AV). BT134W I F 12 10 8 IF(RMS) / A time VF V VF time fr 6 4 2 0 10us 100us 1ms tp / s 10ms 100ms Fig.2. Definition of Vfr Fig.5. Maximum permissible rms current IF(RMS) versus pulse width. trr / ns IF=10 A 20 PF / W Vo = 1.26 V Rs = 0.03 Ohms BYR29 Ths(max) / C D = 1.0 40 1000 15 0.5 67.5 100 95 1A 10 0.2 0.1 tp tp T t 10 122.5 5 I D= Tj = 25 C Tj = 100 C 150 12 T 0 1 0 2 4 6 IF(AV) / A 8 10 1 10 dIF/dt (A/us) 100 Fig.3. Maximum forward dissipation PF = f(IF(AV)); square wave where IF(AV) =IF(RMS) x D. Fig.6. Maximum trr at Tj = 25C and 100C. September 1998 3 Rev 1.400 Philips Semiconductors Product specification Rectifier diodes ultrafast BYR29F series 10 Irrm / A IF=10A 1000 Qs / nC IF = 10A 1 IF=1A 100 2A 0.1 Tj = 25 C Tj = 100 C 0.01 1 10 -dIF/dt (A/us) 100 10 1.0 10 -dIF/dt (A/us) 100 Fig.7. Maximum Irrm at Tj = 25C and 100C. Fig.9. Maximum Qs at Tj = 25C 30 25 20 15 IF / A Tj = 25 C Tj = 150 C BYR29 10 Transient thermal impedance, Zth j-hs (K/W) 1 0.1 typ max 10 0.01 5 0 P D tp D= tp T t 0 0.5 1 1.5 VF / V 2 2.5 3 0.001 1us T 10us 100us 1ms 10ms 100ms 1s pulse width, tp (s) BYV29F 10s Fig.8. Typical and maximum forward characteristic IF = f(VF); parameter Tj Fig.10. Transient thermal impedance Zth = f(tp) September 1998 4 Rev 1.400 Philips Semiconductors Product specification Rectifier diodes ultrafast MECHANICAL DATA Dimensions in mm Net Mass: 2 g BYR29F series 10.2 max 5.7 max 3.2 3.0 0.9 0.5 4.4 max 2.9 max 4.4 4.0 7.9 7.5 17 max seating plane 3.5 max not tinned 4.4 13.5 min k 0.4 M a 0.9 0.7 0.55 max 1.3 5.08 top view Fig.11. SOD100; The seating plane is electrically isolated from all terminals. Notes 1. Refer to mounting instructions for F-pack envelopes. 2. Epoxy meets UL94 V0 at 1/8". September 1998 5 Rev 1.400 Philips Semiconductors Product specification Rectifier diodes ultrafast DEFINITIONS Data sheet status Objective specification Product specification Limiting values BYR29F series This data sheet contains target or goal specifications for product development. This data sheet contains final product specifications. Preliminary specification This data sheet contains preliminary data; supplementary data may be published later. Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of this specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. (c) Philips Electronics N.V. 1998 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. September 1998 6 Rev 1.400 |
Price & Availability of BYR29F
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |