 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls April 2007 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls Features Bi-directional interface between any 2 levels tm General Description The FXL4TD245 is a configurable 4-bit dual-voltagesupply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A Port tracks the VCCA level, and the B Port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in 3-STATE until both VCCs reach active levels allowing either VCC to be powered-up first. Internal power down control circuits place the device in 3-STATE if either VCC is removed. The Transmit/Receive (T/R) inputs independently determine the direction of data through each of the four bits. The OE input, when HIGH, disables both the A and B Ports by placing them in a 3-STATE condition. The FXL4TD245 is designed so that the control pins (T/R and OE) are supplied by VCCA. from 1.1V to 3.6V Fully configurable: Inputs track VCC level Non-preferential power-up sequencing; either VCC may be powered-up first Outputs remain in 3-STATE until active VCC level is reached Outputs switch to 3-STATE if either VCC is at GND Power-off protection Control inputs (T/Rn, OE) levels are referenced to VCCA voltage Packaged in 16-Terminal DQFN (2.5mm x 3.5mm) ESD protections exceeds: - 4kV HBM ESD (per JESD22-A114 & Mil Std 883e 3015.7) - 8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7) - 1kV CDM ESD (per ESD STM 5.3) - 200V MM ESD (per JESD22-A115 & ESD STM5.2) Ordering Information Order Number FXL4TD245BQX Package Number MLP016E Pb-Free Yes Package Description 16-Terminal Depopulated Quad Very-Thin Flat Pack, No Leads (DQFN), JEDEC MO-241, 2.5mm x 3.5mm Pb-Free package per JEDEC J-STD-020B. (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls Functional Diagram VCCA OE A 0-3 B0-3 T/R 0-3 VCCB Pin Descriptions Pin Names OE T/Rn An Bn VCCA VCCB Description Output Enable Input Transmit/Receive Inputs Side A Inputs or 3-STATE Outputs Side B Inputs or 3-STATE Outputs Side A Power Supply Side B Power Supply Truth Table Inputs Connection Diagram VCCA VCCB 1 16 15 14 13 12 11 10 8 9 OE T/R0 T/R1 T/R2 T/R3 L L L L L L L L H L H X X X X X X X X X L H X X X X X X X X X L H X X X X X X X X X L H X Outputs B0 Data to A0 Output A0 Data to B0 Output B1 Data to A1 Output A1 Data to B1 Output B2 Data to A2 Output A2 Data to B2 Output B3 Data to A3 Output A3 Data to B3 Output 3-State T/R0 2 A0 3 A1 4 A2 5 A3 6 T/R3 7 GND OE (Top View) T/R1 B0 B1 B2 B3 T/R2 H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care Power-Up/Power-Down Sequencing FXL translators offer an advantage in that either VCC may be powered up first. This benefit derives from the chip design. When either VCC is at 0 volts, outputs are in a HIGH-Impedance state. The control inputs (T/Rn and OE) are designed to track the VCCA supply. A pull-up resistor tying OE to VCCA should be used to ensure that bus contention, excessive currents, or oscillations do not occur during power-up/power-down. The size of the pullup resistor is based upon the current-sinking capability of the OE driver. The recommended power-up sequence is the following: 1. Apply power to either VCC. 2. Apply power to the T/Rn inputs (Logic HIGH for A-to-B operation; Logic LOW for B-to-A operation) and to the respective data inputs (A Port or B Port). This may occur at the same time as Step 1. 3. Apply power to other VCC. 4. Drive the OE input LOW to enable the device. The recommended power-down sequence is the following: 1. Drive OE input HIGH to disable the device. 2. Remove power from either VCC. 3. Remove power from other VCC. Pin Assignment Pin Number 1 2 3-6 7 8 9 10 11-14 15 16 Terminal Name VCCA T/R0 A0-A3 T/R3 GND OE T/R2 B3-B0 T/R1 VCCB (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 2 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls Absolute Maximum Ratings The "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The "Recommended Operating Conditions" table will define the conditions for actual device operation. Symbol VCCA, VCCB VI Supply Voltage Parameter DC Input Voltage I/O Port A I/O Port B Control Inputs (T/Rn, OE) Output Voltage(1) Outputs 3-STATE Outputs Active (An) Outputs Active (Bn) DC Input Diode Current @ VI < 0V DC Output Diode Current @ VO < 0V VO > VCC DC Output Source/Sink Current DC VCC or Ground Current per Supply Pin Storage Temperature Range Rating -0.5V to +4.6V -0.5V to +4.6V -0.5V to +4.6V -0.5V to +4.6V -0.5V to +4.6V -0.5V to VCCA + 0.5V -0.5V to VCCB + 0.5V -50mA -50mA +50mA -50mA / +50mA 100mA -65C to +150C VO IIK IOK IOH / IOL ICC TSTG Recommended Operating Conditions(2) Symbol VCCA or VCCB Power Supply Operating Input Voltage Port A Port B Control Inputs (T/Rn, OE) Output Current in IOH/IOL with VCC @ 3.0V to 3.6V 2.3V to 2.7V 1.65V to 1.95V 1.4V to 1.65V 1.1V to 1.4V TA t /V Free Air Operating Temperature Maximum Input Edge Rate VCCA/B = 1.1V to 3.6V Parameter Rating 1.1V to 3.6V 0.0V to 3.6V 0.0V to 3.6V 0.0V to VCCA 24mA 18mA 6mA 2mA 0.5mA -40C to +85C 10ns/V Notes: 1. IO Absolute Maximum Rating must be observed. 2. All unused inputs and I/O pins must be held at VCCI or GND. (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 3 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls DC Electrical Characteristics Symbol VIH Parameter High Level Input Voltage(3) Conditions Data Inputs An, Bn VCCI (V) 2.7-3.6 2.3-2.7 1.65-2.3 1.4-1.65 1.1-1.4 VCCO (V) 1.1-3.6 Min. 2.0 1.6 0.65 x VCCI 0.65 x VCCI 0.9 x VCCI Max. Units V Control Pins OE, T/Rn (Referenced to VCCA) 2.7-3.6 2.3-2.7 1.65-2.3 1.4-1.65 1.1-1.4 1.1-3.6 2.0 1.6 0.65 x VCCA 0.65 x VCCA 0.9 x VCCA VIL Low Level Input Voltage(3) Data Inputs An, Bn 2.7-3.6 2.3-2.7 1.65-2.3 1.4-1.65 1.1-1.4 1.1-3.6 0.8 0.7 0.35 x VCCI 0.35 x VCCI 0.1 x VCCI V Control Pins OE, T/Rn (Referenced to VCCA) 2.7-3.6 2.3-2.7 1.65-2.3 1.4-1.65 1.1-1.4 1.1-3.6 0.8 0.7 0.35 x VCCA 0.35 x VCCA 0.1 x VCCA VOH High Level Output Voltage(4) IOH = -100A IOH = -12mA IOH = -18mA IOH = -24mA IOH = -6mA IOH = -12mA IOH = -18mA IOH = -6mA IOH = -2mA IOH = -0.5mA 1.1-3.6 2.7 3.0 3.0 2.3 2.3 2.3 1.65 1.4 1.1 1.1-3.6 2.7 3.0 3.0 2.3 2.3 1.65 1.4 1.1 1.1-3.6 1.1-3.6 2.7 3.0 3.0 2.3 2.3 2.3 1.65 1.4 1.1 1.1- 3.6 2.7 3.0 3.0 2.3 2.3 1.65 1.4 1.1 3.6 VCC0-0.2 2.2 2.4 2.2 2.0 1.8 1.7 1.25 1.05 0.75 x VCC0 0.2 0.4 0.4 0.55 0.4 0.6 0.3 0.35 0.3 x VCC0 1.0 V VOL Low Level Output Voltage(4) IOL = 100A IOL = 12mA IOL = 18mA IOL = 24mA IOL =12mA IOL = 18mA IOL = 6mA IOL = 2mA IOL = 0.5mA V II Input Leakage Current. Control Pins VI = VCCA or GND A (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 4 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls DC Electrical Characteristics (Continued) Symbol IOFF IOZ Parameter Conditions VCCI (V) 0 3.6 3.6 0 3.6 1.1-3.6 1.1-3.6 0 1.1-3.6 1.1-3.6 0 3.6 VCCO (V) 3.6 0 3.6 3.6 0 1.1-3.6 1.1-3.6 1.1-3.6 0 0 1.1-3.6 3.6 Min. Max. 10.0 10.0 10.0 +10.0 +10.0 20.0 20.0 -10.0 10.0 -10.0 10.0 500 Units A A Power Off Leakage An, VI or VO = 0V to 3.6V Current Bn, VI or VO = 0V to 3.6V 3-STATE Output An, Bn OE = VIH Leakage(5) OE = Don't Care Bn, 0 VO 3.6V OE = Don't Care An, VI = VIH or VIL Quiescent Supply Current(6) Quiescent Supply Current(6) Quiescent Supply Current Quiescent Supply Current VI = VCCI or GND; IO = 0 VI = VCCI or GND; IO = 0 VI = VCCA or GND; IO = 0 VI = VCCA or GND; IO = 0 VI = VCCB or GND; IO = 0 VI = VCCB or GND; IO = 0 ICCA/B ICCZ ICCA ICCB ICCA/B A A A A A A A Increase in ICC per VIH = 3.0 Input; Other Inputs at VCC or GND Notes: 3. VCCI = the VCC associated with the data input under test. 4. VCCO = the VCC associated with the output under test. 5. Don't Care = Any valid logic level. 6. Reflects current per supply, VCCA or VCCB. (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 5 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls AC Electrical Characteristics VCCA = 3.0V to 3.6V TA = -40C to +85C VCCB = VCCB = 3.0V to 3.6V 2.3V to 2.7V Symbol Parameter Propagation Delay B to A tPZH, tPZL Output Enable OE to B Output Enable OE to A tPHZ, tPLZ Output Disable OE to B Output Disable OE to A VCCB = 1.65V to 1.95V Min. 0.5 0.3 1.0 0.5 0.7 0.2 VCCB = VCCB = 1.4V to 1.6V 1.1V to 1.3V Min. 0.6 0.5 1.0 0.5 1.5 0.2 Min. 0.2 0.2 0.5 0.5 0.2 0.2 Max. 3.5 3.5 4.0 4.0 3.8 3.7 Min. 0.3 0.2 0.7 0.5 0.2 0.2 Max. 3.9 3.8 4.4 4.0 4.0 3.7 Max. 5.4 4.0 5.9 4.0 4.8 3.7 Max. 6.8 4.3 6.4 4.0 6.2 3.7 Min. 1.4 0.8 1.5 0.5 2.0 0.2 Max. 22.0 13.0 17.0 4.0 17.0 3.7 Units ns tPLH, tPHL Propagation Delay A to B ns ns VCCA = 2.3V to 2.7V TA = -40C to +85C VCCB = VCCB = 3.0V to 3.6V 2.3V to 2.7V Symbol Parameter Propagation Delay B to A tPZH, tPZL Output Enable OE to B Output Enable OE to A tPHZ, tPLZ Output Disable OE to B Output Disable OE to A VCCB = 1.65V to 1.95V Min. 0.5 0.5 1.0 0.6 0.7 0.2 VCCB = VCCB = 1.4V to 1.6V 1.1V to 1.3V Min. 0.8 0.5 1.0 0.6 1.5 0.2 Min. 0.2 0.3 0.6 0.6 0.2 0.2 Max. 3.8 3.9 4.2 4.5 4.1 4.0 Min. 0.4 0.4 0.8 0.6 0.2 0.2 Max. 4.2 4.2 4.6 4.5 4.3 4.0 Max. 5.6 4.5 6.0 4.5 4.8 4.0 Max. 6.9 4.8 6.8 4.5 6.7 4.0 Min. 1.4 1.0 1.5 0.6 2.0 0.2 Max. 22.0 7.0 17.0 4.5 17.0 4.0 Units ns tPLH, tPHL Propagation Delay A to B ns ns VCCA = 1.65V to 1.95V TA = -40C to +85C VCCB = VCCB = 3.0V to 3.6V 2.3V to 2.7V Symbol tPLH, tPHL tPZH, tPZL tPHZ, tPLZ VCCB = 1.65V to 1.95V Min. 0.8 0.8 1.2 1.0 0.8 0.5 VCCB = VCCB = 1.4V to 1.6V 1.1V to 1.3V Min. 0.9 1.0 1.2 1.0 1.5 0.5 Parameter Propagation Delay A to B Propagation Delay B to A Output Enable OE to B Output Enable OE to A Output Disable OE to B Output Disable OE to A Min. 0.3 0.5 0.6 1.0 0.2 0.5 Max. 4.0 5.4 5.2 6.7 5.1 5.0 Min. 0.5 0.5 0.8 1.0 0.2 0.5 Max. 4.5 5.6 5.4 6.7 5.2 5.0 Max. 5.7 5.7 6.9 6.7 5.2 5.0 Max. 7.1 6.0 7.2 6.7 7.0 5.0 Min. 1.5 1.2 1.5 1.0 2.0 0.5 Max. 22.0 8.0 18.0 6.7 17.0 5.0 Units ns ns ns (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 6 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls AC Electrical Characteristics (Continued) VCCA = 1.4V to 1.6V TA = -40C to +85C VCCB = VCCB = 3.0V to 3.6V 2.3V to 2.7V Symbol tPLH, tPHL tPZH, tPZL tPHZ, tPLZ VCCB = 1.65V to 1.95V Min. 1.0 0.9 1.3 1.0 0.9 1.0 VCCB = VCCB = 1.4V to 1.6V 1.1V to 1.3V Min. 1.0 1.0 1.4 1.0 1.5 1.0 Parameter Propagation Delay A to B Propagation Delay B to A Output Enable OE to B Output Enable OE to A Output Disable OE to B Output Disable OE to A Min. 0.5 0.6 1.1 1.0 0.4 1.0 Max. 4.3 6.8 7.5 7.5 6.1 6.0 Min. 0.5 0.8 1.1 1.0 0.4 1.0 Max. 4.8 6.9 7.6 7.5 6.2 6.0 Max. 6.0 7.1 7.7 7.5 6.2 6.0 Max. 7.3 7.3 7.9 7.5 7.5 6.0 Min. 1.5 1.3 2.0 1.0 2.0 1.0 Max. 22.0 9.5 20.0 7.5 18.0 6.0 Units ns ns ns VCCA = 1.1V to 1.3V TA = -40C to +85C VCCB = VCCB = 3.0V to 3.6V 2.3V to 2.7V Symbol tPLH, tPHL tPZH, tPZL tPHZ, tPLZ VCCB = 1.65V to 1.95V Min. 1.2 1.5 2.0 2.0 1.0 2.0 VCCB = VCCB = 1.4V to 1.6V 1.1V to 1.3V Min. 1.3 1.5 2.0 2.0 2.0 2.0 Parameter Propagation Delay A to B Propagation Delay B to A Output Enable OE to B Output Enable OE to A Output Disable OE to B Output Disable OE to A Min. 0.8 1.4 1.0 2.0 1.0 2.0 Max. 13.0 22.0 12.0 22.0 15.0 15.0 Min. 1.0 1.4 1.0 2.0 0.7 2.0 Max. 7.0 22.0 9.0 22.0 7.0 12.0 Max. 8.0 22.0 10.0 22.0 8.0 12.0 Max. 9.5 22.0 11.0 22.0 10.0 12.0 Min. 2.0 2.0 2.0 2.0 2.0 2.0 Max. 24.0 24.0 24.0 22.0 20.0 12.0 Units ns ns ns Capacitance TA = +25C Symbol CIN CI/O CPD Parameter Input Capacitance Control Pins (OE, T/R) Input/Output Capacitance An, Bn Ports Power Dissipation Capacitance Conditions VCCA = VCCB = 3.3V, VI = 0V or VCCA/B VCCA = VCCB = 3.3V, VI = 0V or VCCA/B VCCA = VCCB = 3.3V, VI = 0V or VCC, F = 10MHz Typical 4.0 5.0 20.0 Units pF pF pF (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 7 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls AC Loading and Waveforms VCC TEST SIGNAL Rtr1 DUT OPEN GND VCC x 2 tPLH, tPHL tPZH, tPHZ tPZL, tPLZ CL RL Test tPLH, tPHL tPLZ, tPZL tPHZ, tPZH Switch OPEN VCCO x 2 at VCCO = 3.3 0.3V, 2.5V 0.2V, 1.8V 0.15V, 1.5V 0.1V, 1.2V 0.1V GND Figure 1. AC Test Circuit AC Load Table VCCO 1.2V 0.1V 1.5V 0.1V 1.8V 0.15V 2.5V 0.2V 3.3V 0.3V CL 15pF 15pF 15pF 15pF 15pF RL 2k 2k 2k 2k 2k Rtr1 2k 2k 2k 2k 2k DATA IN tpxx DATA OUT Vmi tpxx Vmo VCCI GND VCCO OUTPUT CONTROL tPZL DATA OUT Vmo tPLZ Vmi VCCA GND VY VOL Input tR = tF = 2.0 ns, 10% to 90% Input tR = tF = 2.5ns, 10% to 90%, @ VI = 3.0V to 3.6V only Input tR = tF = 2.0 ns, 10% to 90% Input tR = tF = 2.5ns, 10% to 90%, @ VI = 3.0V to 3.6V only Figure 2. Waveform for Inverting and Non-Inverting Functions OUTPUT CONTROL tPZH DATA OUT Vmo Figure 3. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic VCCA GND VOH VX Vmi tPHZ Input tR = tF = 2.0 ns, 10% to 90% Input tR = tF = 2.5ns, 10% to 90%, @ VI = 3.0V to 3.6V only Figure 4. 3-STATE Output High Enable and Disable Times for Low Voltage Logic Symbol Vmi Vmo VX VY VCC 3.3V 0.3V VCCI / 2 VCCO / 2 VOH - 0.3V VOL + 0.3V 2.5V 0.2V VCCI / 2 VCCO / 2 VOH - 0.15V VOL + 0.15V 1.8V 0.15V VCCI / 2 VCCO / 2 VOH - 0.15V VOL + 0.15V 1.5V 0.1V VCCI / 2 VCCO / 2 VOH - 0.1V VOL + 0.1V 1.2V 0.1V VCCI / 2 VCCO / 2 VOH - 0.1V VOL + 0.1V For Vmi : VCCI = VCCA for Control Pins T/R and OE, or VCCA / 2 (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 8 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls Tape and Reel Specification Tape Format for DQFN 10 Package Designator BQX Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities 125 (typ) 2500/3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Dimensions millimeters (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 9 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls Reel Dimensions inches (millimeters) Tape Size 12 mm A 13.0 (330) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 7.008 (178) W1 0.488 (12.4) W2 0.724 (18.4) (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 10 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls Physical Dimensions millimeters unless otherwise noted Figure 5. 6-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241 2.5 x 3.5mm Package Number MLP016E (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 11 FXL4TD245 Low Voltage Dual Supply 4-Bit Signal Translator with Configurable Voltage Supplies and Signal Levels and 3-STATE Outputs and Independent Direction Controls TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Across the board. Around the world.TM ActiveArrayTM BottomlessTM Build it NowTM CoolFETTM CROSSVOLTTM CTLTM Current Transfer LogicTM DOMETM 2 E CMOSTM (R) EcoSPARK EnSignaTM FACT Quiet SeriesTM (R) FACT (R) FAST FASTrTM FPSTM (R) FRFET GlobalOptoisolatorTM GTOTM HiSeCTM (R) i-LoTM ImpliedDisconnectTM IntelliMAXTM ISOPLANARTM MICROCOUPLERTM MicroPakTM MICROWIRETM Motion-SPMTM MSXTM MSXProTM OCXTM OCXProTM (R) OPTOLOGIC (R) OPTOPLANAR PACMANTM PDP-SPMTM POPTM (R) Power220 (R) Power247 PowerEdgeTM PowerSaverTM Power-SPMTM (R) PowerTrench Programmable Active DroopTM (R) QFET QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM ScalarPumpTM SMART STARTTM (R) SPM STEALTHTM SuperFETTM SuperSOTTM -3 SuperSOTTM -6 SuperSOTTM -8 SyncFETTM TCMTM (R) The Power Franchise TM TinyBoostTM TinyBuckTM (R) TinyLogic TINYOPTOTM TinyPowerTM TinyWireTM TruTranslationTM SerDesTM (R) UHC UniFETTM VCXTM WireTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I26 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. No Identification Needed Full Production Obsolete Not In Production (c)2006 Fairchild Semiconductor Corporation FXL4TD245 Rev. 1.0.4 www.fairchildsemi.com 12 |
Price & Availability of FXL4TD245
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |