![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CEPT/T1 TEW5315 is designed to be used either as a transmit or a receive transformer in the ISDN primary access network, interfacing the SIEMENS PEB2235 to a 75, 100 or 120 ohm line. When in transmit mode, connect the two primary windings in parallel, pin 3 to 4 and pin 6 to 5. In/Output Transformer When in receive mode, connect the two primary windings in series, pin 6 to pin 4, thus forming a center tap at pin 6/4. Typical applications are: * * * Primart rate ISDN network nodes. PBX or computer to T1/CEPT Digital trunk TDM Multiplexers TEW5315 MECHANICAL 1 Line 3 6 Device 4 Com 1 Line 75 7 120 8 TEW5315 -4 3 6 Device 4 5 8 TEW5315 -1, -2 & -3 5 Top view 9.6 12.2 2.54 (6 places) All dimensions are in mm 0.6 9.1 1.9 Recommended foot print 5.2 max 1.27 2.54 7.62 12.7 TEW5315.chp ELECTRICAL SPECIFICATION Line Impedance Inductance (mH) Turns Ratio Pulse Mask Longitud. Bal. Return Loss Dielectric Strength (Vrms) (1-8) (1-7) (1-8) (3-6):(4-5):(1-8) (3-6):(4-5):(1-7) TEW5315 -1 100 > 3.4 1 : 1 : 2.67 T1 T1.408 T1.408 1500 -2 75 > 0.75 1 : 1 : 1.57 CEPT I.431 G.703 1500 -3 120 > 1.2 1 :1 : 2 CEPT I.431 G.703 1500 -4 120 75 > 1.2 1:1:2 1 : 1 : 1.57 CEPT I.431 G.703 1500 ISSUE: B 96/08/08 Filtran Limited 229 Colonnade Road, Nepean, Ontario, Canada. K2E 7K3, Tel : (613) 226-1626 Fax : (613) 226-7124 2-35 |
Price & Availability of TEW5315
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |