View THS6052_1005466.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

THS6052, THS6053 175 mA, 12 V ADSL CPE LINE DRIVERS
SLOS293D - JUNE 2000 - REVISED DECEMBER 2001
D Remote Terminal ADSL Line Driver D D D D
- Ideal for Both Full Rate ADSL and G.Lite - Compatible With 1:1 Transformer Ratio Low 2.7 pA/Hz Noninverting Current Noise - Reduces Noise Feedback Through Hybrid Into Downstream Channel Wide Supply Voltage Range 5 V to 15 V - Ideal for 12-V Operation Wide Output Swing - 42 Vpp Differential Output Voltage, RL = 200 , 12-V Supply High Output Current - 175 mA (typ)
THS6052 SOIC (D) AND SOIC PowerPAD (DDA) PACKAGE (TOP VIEW)
D High Speed D D D D D
- 110 MHz (-3 dB, G=8, 12 V) - 1500 V/s Slew Rate (G = 8, 12 V) Low Distortion, Single-Ended, G = 8 - -83 dBc (250 kHz, 2 Vpp, 100- load) Low Power Shutdown (THS6053) - 300-A Total Standby Current Thermal Shutdown and Short Circuit Protection Standard SOIC, SOIC PowerPAD, and TSSOP PowerPAD Package Evaluation Module Available
THS6053 SOIC (D) AND TSSOP PowerPAD (PWP) PACKAGE (TOP VIEW)
D1 OUT D1 IN- D1 IN+ VCC-
1 2 3 4
8 7 6 5
VCC+ D2 OUT D2 IN- D2 IN+
D1 OUT D1 IN- D1 IN+ VCC- N/C GND N/C
1 2 3 4 5 6 7
14 13 12 11 10 9 8
VCC+ D2 OUT D2 IN- D2 IN+ N/C SHUTDOWN N/C
description
The THS6052/3 is a high-speed line driver ideal for driving signals from the remote terminal to the central office in asymmetrical digital subscriber line (ADSL) applications. It can operate from 12-V supply voltages while drawing only 5.2 mA of supply current per channel. It offers low -83 dBc total harmonic distortion driving a 100- load (2 Vpp). The THS6052/3 offers a high 42-Vpp differential output swing across a 200- load from a 12-V supply. The THS6053 features a low-power shutdown mode, consuming only 300 A quiescent current per channel. The THS6052/3 is packaged in a standard SOIC, SOIC PowerPAD, and TSSOP PowerPAD packages.
+12 V VI+ + _ THS6052 Driver 1 750 THS6052 Driver 2 50 1:1 15.4 dBm Delivered to Telephone Line DEVICE RELATED PRODUCTS DESCRIPTION
THS6042/3 350-mA, 12 ADSL CPE line driver 100 THS6092/3 275-mA, +12 V ADSL CPE line driver OPA2677 THS6062 380-mA, +12 V ADSL CPE line driver Low noise ADSL receiver
210 0.68 F
VI-
+ _
50
-12 V
750
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright 2001, Texas Instruments Incorporated
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
1
THS6052, THS6053 175 mA, 12 V ADSL CPE LINE DRIVERS
SLOS293D - JUNE 2000 - REVISED DECEMBER 2001
AVAILABLE OPTION PACKAGED DEVICE TA SOIC-8 (D) THS6052CD THS6052ID SOIC-8 PowerPAD (DDA) THS6052CDDA THS6052IDDA SOIC-14 (D) THS6053CD THS6053ID TSSOP-14 (PWP) THS6053CPWP THS6053IPWP EVALUATION MODULES THS6052EVM THS6053EVM --
0C to 70C - 40C to 85C
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
Supply voltage, VCC+ to VCC- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 V Input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC Output current (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275 mA Differential input voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 V Maximum junction temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Total power dissipation at (or below) 25C free-air temperature . . . . . . . . . . . See Dissipation Ratings Table Operating free-air temperature, TA: Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40C to 85C Storage temperature, Tstg : Commercial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 125C Industrial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 125C Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The THS6052 and THS6053 may incorporate a PowerPAD on the underside of the chip. This acts as a heatsink and must be connected to a thermally dissipating plane for proper power dissipation. Failure to do so may result in exceeding the maximum junction temperature which could permanently damage the device. See TI technical brief SLMA002 for more information about utilizing the PowerPAD thermally enhanced package. DISSIPATION RATING TABLE PACKAGE D-8 DDA D-14 PWP JA 95C/W 45.8C/W 66.6C/W 37.5C/W JC 38.3C/W 9.2C/W 26.9C/W 1.4C/W TA = 25C TJ = 150C POWER RATING 1.32 W 2.73 W 1.88 W
3.3 W This data was taken using the JEDEC proposed high-K test PCB. For the JEDEC low-K test PCB, the JA is168C/W for the D-8 package and 122.3C/W for the D-14 package.
recommended operating conditions
MIN Dual supply Supply voltage VCC+ to VCC- voltage, Operating free air temperature TA free-air temperature, Single supply C-suffix I-suffix 5 10 0 -40 NOM MAX 15 30 70 85 UNIT V C
2
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
THS6052, THS6053 175 mA, 12 V ADSL CPE LINE DRIVERS
SLOS293D - JUNE 2000 - REVISED DECEMBER 2001
electrical characteristics over recommended operating free-air temperature range, TA = 25C, VCC = 12 V, RFEEDBACK = 750 , RL = 100 (unless otherwise noted)
dynamic performance
PARAMETER TEST CONDITIONS G= 1 RF = 1 k 1, RL = 50 BW Small signal bandwidth ( 3 dB) Small-signal (- RL = 100 G= 2, RF = 680 G= 8, RF = 330 G= 1 RF = 1 k 1, G= 2, RF = 680 G= 8, RF = 330 VO = 4 VPP SR Slew rate (see Note 2), G 8 G=8 VO = 16 VPP VCC = 5 V VCC = 12 V VCC = 15 V VCC = 12 V VCC = 5 V VCC = 12 V VCC = 5 V 12 V V, VCC = 5 V VCC = 12 V VCC = 5 V 12 V V, VCC = 5 V VCC = 12 V VCC = 15 V VCC = 12 V VCC = 15 V MIN TYP 110 120 100 90 150 170 135 110 650 850 950 1500 1700 V/s MHz MAX UNIT
VCC = 15 V NOTE 2: Slew rate is defined from the 25% to the 75% output levels.
noise/distortion performance
PARAMETER TEST CONDITIONS Gain = 8, RL = 100 , VCC = 12 V, f = 250 kHz Gain = 8, VCC = 5 V, RL = 50 , f = 250 kHz VO(pp) = 2 V VO(pp) = 16 V VO(pp) = 2 V VO(pp) = 6 V MIN TYP - 83 - 78 - 74 - 72 2.1 2.7 pA/Hz 10.7 VO = 2 Vp-p VO = 2 Vp-p - 79 dBc - 71 nV/Hz dBc MAX UNIT
THD
Total harmonic distortion (single ended (single-ended configuration)
Vn
Input voltage noise +Input
VCC = 5 V, f = 10 kHz , 12 V f = 10 kHz, VCC = 5 V, VCC = 12 V V, VCC = 15 V VCC = 12 V, RL= 100 VCC = 5 V, RL= 50
In
Input current noise -Input f = 250 kHz, G = 2,
XT
Crosstalk
f = 250 kHz, G = 2,
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
3
THS6052, THS6053 175 mA, 12 V ADSL CPE LINE DRIVERS
SLOS293D - JUNE 2000 - REVISED DECEMBER 2001
electrical characteristics over recommended operating free-air temperature range, TA = 25C, VCC = 12 V, RFEEDBACK = 750 , RL = 100 (unless otherwise noted) (continued)
dc performance
PARAMETER Input offset voltage VOS Differential offset voltage Offset drift - Input bias current IIB + Input bias current Differential input bias current ZOL Open loop transimpedance VCC = 12 V, VCC = 6 V VCC = 12 V, VCC = 6 V VCC = 12 V V, VCC = 6 V TEST CONDITIONS TA = 25C TA = full range TA = 25C TA = full range TA = full range TA = 25C TA = full range TA = 25C TA = full range TA = 25C TA = full range RL = 1 k, MIN TYP 5 3 MAX 10 15 6 8 30 5 2 5 10 12 5 6 10 12 1 M A A V/C mV UNIT
input characteristics
PARAMETER VICR CMRR RI CI Input common mode voltage range common-mode Common mode rejection ratio Common-mode Input resistance Input capacitance TEST CONDITIONS VCC = 12 V VCC = 6 V VCC = 12 V, VCC = 6 V + Input - Input TA = 25C TA = full range MIN 9.7 3.8 59 57 1.5 15 2 TYP 10.1 4.2 66 MAX UNIT V dB M pF
output characteristics
PARAMETER VO Output voltage swing Out ut Single ended TEST CONDITIONS RL = 50 , RL = 100 RL = 25 , RL = 10 , RL = 0 , Open loop VCC = 6 V VCC = 12 V VCC = 6 V VCC = 12 V VCC = 6 V VCC = 12 V MIN 4.2 10.1 4.4 150 150 TYP 4.6 10.5 4.8 175 175 250 14 mA mA V MAX UNIT
IO ISC
Output current Short-circuit current Output resistance
4
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
THS6052, THS6053 175 mA, 12 V ADSL CPE LINE DRIVERS
SLOS293D - JUNE 2000 - REVISED DECEMBER 2001
electrical characteristics over recommended operating free-air temperature range, TA = 25C, VCC = 12 V, RFEEDBACK = 750 , RL = 100 (unless otherwise noted) (continued)
power supply
PARAMETER Dual supply VCC Operating range Single supply VCC = 12 V ICC Quiescent current (each driver) VCC = 6 V VCC = 12 V PSRR Power supply rejection ratio VCC = 6 V TA = 25C TA = full range TA = 25C TA = full range TA = 25C TA = full range TA = 25C TA = full range -64 -61 -60 -58 TEST CONDITIONS MIN 4.5 9 5.2 4.5 - 62 - - 70 dB TYP MAX 16.5 33 7 8 6.5 7.5 mA UNIT V
shutdown characteristics (THS6053 only)
PARAMETER VIL(SHDN) VIH(SHDN) ICC(SHDN) tDIS tEN IIL(SHDN) IIH(SHDN) Shutdown pin voltage for power up Shutdown pin voltage for power down Total quiescent current when in shutdown state Disable time (see Note 3) Enable time (see Note 3) Shutdown pin input bias current for power up Shutdown pin input bias current for power down TEST CONDITIONS VCC = 6 V, 12 V GND = 0 V, (GND Pin as Reference) VCC = 6 V, 12 V, GND = 0 V, (GND Pin as Reference) VGND = 0 V, VCC = 6 V, 12 V VCC = 12 V VCC = 12 V VCC = 6 V, 12 V VCC = 6 V, 12 V, V(SHND) = 3.3 V 2 0.3 0.1 0.4 40 50 100 100 0.7 MIN TYP MAX 0.8 UNIT V V mA s s A A
NOTE 3: Disable/enable time is defined as the time from when the shutdown signal is applied to the SHDN pin to when the supply current has reached half of its final value.
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
5
THS6052, THS6053 175 mA, 12 V ADSL CPE LINE DRIVERS
SLOS293D - JUNE 2000 - REVISED DECEMBER 2001
APPLICATION INFORMATION
+12 V 0.1 F + 6.8 F 50 1:1 750 Telephone Line 100
THS6052 Driver 1 VI+ + _
1 F 210 0.68 F THS6052 Driver 2 VI- + _ 50 1 k 0.1 F 499 - + 750 0.1 F -12 V 1 k 499 - + VO- THS6062 Receiver 2 6.8 F + THS6062 Receiver 1 499 VO+ 499 +12 V
-12 V 0.01 F
Figure 1. THS6052 ADSL Application With 1:1 Transformer Ratio
6
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
THS6052, THS6053 175 mA, 12 V ADSL CPE LINE DRIVERS
SLOS293D - JUNE 2000 - REVISED DECEMBER 2001
MECHANICAL DATA
D (R-PDSO-G**)
14 PINS SHOWN
PLASTIC SMALL-OUTLINE PACKAGE
0.050 (1,27) 0.020 (0,51) 0.014 (0,35) 14 8 0.008 (0,20) NOM 0.244 (6,20) 0.228 (5,80) 0.157 (4,00) 0.150 (3,81) 0.010 (0,25) M
Gage Plane
0.010 (0,25) 1 A 7 0- 8 0.044 (1,12) 0.016 (0,40)
Seating Plane 0.069 (1,75) MAX 0.010 (0,25) 0.004 (0,10) 0.004 (0,10)
PINS ** DIM A MAX
8 0.197 (5,00) 0.189 (4,80)
14 0.344 (8,75) 0.337 (8,55)
16 0.394 (10,00) 0.386 (9,80) 4040047 / D 10/96
A MIN
NOTES: A. B. C. D.
All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15). Falls within JEDEC MS-012
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
7
THS6052, THS6053 175 mA, 12 V ADSL CPE LINE DRIVERS
SLOS293D - JUNE 2000 - REVISED DECEMBER 2001
MECHANICAL DATA
DDA (S-PDSO-G8) Power PADt PLASTIC SMALL-OUTLINE
1,27 8 5
0,49 0,35
0,10 M
Thermal Pad (See Note D)
0,20 NOM 3,99 3,81 6,20 5,84
Gage Plane 0,25 0-8 0,89 0,41 1,68 MAX
1 4,98 4,80
4
Seating Plane 1,55 1,40 0,13 0,03 0,10
4202561/A 02/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. The package thermal performance may be enhanced by bonding the thermal pad to an external thermal plane. This pad is electrically and thermally connected to the backside of the die and possibly selected leads.
PowerPAD is a trademark of Texas Instruments.
8
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
THS6052, THS6053 175 mA, 12 V ADSL CPE LINE DRIVERS
SLOS293D - JUNE 2000 - REVISED DECEMBER 2001
MECHANICAL INFORMATION
PWP (R-PDSO-G**)
20-PIN SHOWN
PowerPAD PLASTIC SMALL-OUTLINE PACKAGE
0,65 20
0,30 0,19 11
0,10 M
Thermal Pad (See Note D) 4,50 4,30 6,60 6,20 0,15 NOM
Gage Plane 1 A 10 0- 8 0,25 0,75 0,50
Seating Plane 1,20 MAX 0,15 0,05 PINS ** DIM A MAX A MIN 0,10
14 5,10 4,90
16 5,10 4,90
20 6,60 6,40
24 7,90 7,70
28 9,80 9,60 4073225/E 03/97
NOTES: A. B. C. D.
All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusions. The package thermal performance may be enhanced by bonding the thermal pad to an external thermal plane. This pad is electrically and thermally connected to the backside of the die and possibly selected leads. E. Falls within JEDEC MO-153
PowerPAD is a trademark of Texas Instruments.
POST OFFICE BOX 655303
* DALLAS, TEXAS 75265
9
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265
Copyright 2001, Texas Instruments Incorporated

▲Up To Search▲

Price & Availability of THS6052

	To Download THS6052 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .