 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MILITARY DATA SHEET MNLM140-15H REV 0A0 THREE TERMINAL POSITIVE REGULATORS General Description The LM140 monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 0.5A output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) regulation for elimination of noise and distribution problems associated with single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents. Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply. Original Creation Date: 05/10/95 Last Update Date: 05/10/95 Last Major Revision Date: 05/10/95 Industry Part Number LM140 NS Part Numbers LM140H-15/883 Prime Die LM141 Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MNLM140-15H REV 0A0 MILITARY DATA SHEET Features Output current in excess of 0.5A No external components Internal thermal overload protection Internal short circuit current-limiting Output transistor safe-area compensation 2 MNLM140-15H REV 0A0 MILITARY DATA SHEET (Absolute Maximum Ratings) DC Input Voltage 35V Internal Power Dissipation (Note 2) Internally Limited Maximum Junction Temperature 150 C Lead Temperature Soldering (10 seconds) Thermal Resistance ThetaJA (Still Air) (500 LF/Min Air Flow) ThetaJC ESD Susceptibility (Note 3) 300 C 232 C/W 77 C/W 15 C/W 2KV Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specification might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. The Maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TjMAX = 150 C), the junction-to-ambient thermal resistance (ThetaJA), and the ambient temperature (TA). PDMAX = (TjMAX - TA)/ThetaJA. If this dissipation is exceeded, the die temperature will rise above TjMAX and the electrical specifications do not apply. If the die temperature rises above 150 C, the device will do into thermal shutdown. Human body model, 100pF discharged through 1.5K Ohms Note 2: Note 3: Recommended Operating Conditions (Note 1) Temperature Range (TA) (Note 2) -55 C to +125 C Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Conditions are conditions under which the device functions but the specification might not be guaranteed. For guaranteed specifications and test conditions see the Electrical Characteristics. The Maximum allowable power dissipation at any ambient temperature is a function of the maximum junction temperature for operation (TjMAX = 150 C), the junction-to-ambient thermal resistance (ThetaJA), and the ambient temperature (TA). PDMAX = (TjMAX - TA)/ThetaJA. If this dissipation is exceeded, the die temperature will rise above TjMAX and the electrical specifications do not apply. If the die temperature rises above 150 C, the device will go into thermal shutdown. Note 2: 3 MNLM140-15H REV 0A0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vin = 23V, Il = 350mA SYMBOL Vout PARAMETER Output Voltage CONDITIONS Vin = 35V, Il = 5mA NOTES PINNAME MIN 14.25 14.40 Vin = 18.5V Vin = 18.5V, Il = 5mA Vin = 30V, Il = 5mA Vin = 30V RLINE Line Regulation 17.5V <= Vin <= 30V, Il = 200mA 18.5V <= Vin <= 30V, Il = 200mA 20V <= Vin <= 30V, Il = 200mA 14.25 14.5 14.25 14.25 -60 -120 -30 -60 RLOAD Load Regulation 5mA <= Il <= 500mA -150 -300 5mA <= Il <= 200mA -75 -150 IQ Delta IQ Quiescent Current Quiescent Current Change 17.5V <= Vin <= 30V, Il = 200mA 5mA <= Il <= 350mA Ipk Vdo Ios Peak Current Dropout Voltage Short Circuit Current Vin = 35V Vin - Vout = 7V 1 2 -0.8 -0.5 0.4 MAX 15.75 15.60 15.75 15.75 15.75 15.75 60 120 30 60 150 300 75 150 7 0.8 0.5 2.0 2.5 1.0 UNIT V V V V V V mV mV mV mV mV mV mV mV mA mA mA A V A SUBGROUPS 1 1 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1 1, 2, 3 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vin = 23V, Il = 350mA Rr Ripple Rejection Note 1: Note 2: Vin=20V, Il=125mA, ei=1Vrms, f=2.4KHz 54 dB 4, 5, 6 Vout is set to 90 % Reference Voltage. Vdo = Vin - Vout when Vo is 95 % of Reference Voltage. 4 MNLM140-15H REV 0A0 MILITARY DATA SHEET Graphics and Diagrams GRAPHICS# H03ARC (blank) DESCRIPTION See attached graphics following this page. 5 |
Price & Availability of NSC05439
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |