 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MN101C29D Type ROM (x8-bit) x RAM (x 8-bit) x Package Minimum Instruction Execution Time Interrupts Timer Counter MN101C29D 64 K 1.5 K LQFP080-P-1414A *Lead-free 0.10 s (at 4.5 V to 5.5 V, 20 MHz) * RESET * Watchdog * External 0 * External 1 * External 2 * External 3 * External 4 * External 5 * Timer 2 * Timer 3 * Timer 6 * Time base * Timer 8 (2 systems) * Serial 2 * Key interrupts (8 lines) Timer counter 2 : 8-bit x 1 (square-wave output[timer pulse output], PWM output, event count, timer synchronous output, simple pulse width measurement function) Clock source ********************* 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Timer counter 3 : 8-bit x 1 (square-wave output[timer pulse output], event count, remote control carrier output) Clock source ********************* 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency; external clock input Timer counter 2, 3 can be cascade-connected. Time base timer Clock source ********************* 1/1, 1/27, 1/2 8, 1/2 9, 1/210, 1/213, 1/215 of OSC oscillation clock frequency; 1/1, 1/27, 1/2 8, 1/2 9, 1/210, 1/213, 1/215 of XI oscillation clock frequency Timer counter 6 : 8-bit freerun timer Clock source ********************* 1/1 of system clock frequency; 1/1, 1/27, 1/213 of OSC oscillation clock frequency; 1/1, 1/27, 1/213 of XI oscillation clock frequency Timer counter 8 : 16-bit x 1 Clock source ********************* either of system clock, OSC oscillation clock, external clock 1 or external clock 2 divided into 1/1, 1/2, 1/4 and 1/16 (hardware configuration) double buffer type compare register x 2 input capture register x 1 (timer functions) square-wave output (timer pulse output), PWM output (duty continuously variable), event count, simple pulse width measurement function and input capture function Watchdog timer Interrupt source **************** runaway detection frequency selection from 1/216, 1/218 and 1/2 20 of system clock Serial Interface Serial 2 : synchronous type x 1 Synchronous type (MSB or LSB first selectable, 1 to 8 bits arbitrary transmission) Transfer clock source ****** 1/2, 1/4 of system clock frequency; 1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency; timer counter 2, 3 output; 1/3 of frequency of the above clocks Singned/unsigned: 16-bit x 16-bit arithmetic operation (execution in 15 cycles) Unsigned: 32-bit / 16-bit arithmetic operation (execution in 17 cycles) Multiplication / Division functions 1 MAD00025DEM MN101C29D I/O Pins Special Ports I/O Input 53 2 * Common use: 48 * Specified pull-up resistor available * Input/output selectable (bit unit) * Common use: 1 High-current drive port x 1 Electrical Characteristics Supply current Limit Parameter Operating supply current Supply current at STOP Symbol IDD1 IDD2 Condition min fosc = 20 MHz, VDD = 5 V VDD = 5 V typ max 60 10 mA A Unit Pin Assignment SBT2,NLDDMA(P35) NCS3,KEY7(P47) IRQ4,KEY6(P46) IRQ3,KEY5(P45) SBO2,NBR(P33) NDKDMA(P37) SBI2,NBT(P34) NSTDMA(P36) KEY4(P44) 43 KEY3(P43) 42 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 PA4 NC PA6 PA7 NC (IRQ5)PA5 NC NC NC VDD D7(P87) D6(P86) D5(P85) D4(P84) D3(P83) D2(P82) D1(P81) D0(P80) A12,SDO4(P74) A11,SDO3(P73) 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 10 11 12 13 14 15 16 17 18 19 20 41 KEY2(P42) A13(P75) A14(P76) A15(P77) PA3 NC NC NC NC NC 40 39 38 37 36 35 34 33 32 KEY1(P41) LED0,KEY0(P40) NC VSS XO XI(P16) VSS OSC2 OSC1 VDD TM3IO(P13) TM2IO(P12) NC NC IRQ0(P20) IRQ1,SENS(P21) IRQ2(P22) P24 P26 NRST(P27) MN101C29D 31 30 29 28 27 26 25 24 23 22 21 1 2 3 4 5 6 7 8 NC NC NC 9 NWE(P50) A10(P72) A 9(P71) A8(P70) A7(P67) A6(P66) A5(P65) A4(P64) A3(P63) A2(P62) A1(P61) A0(P60) NRE(P51) NCS(P52) A17,NCS1(P53) LQFP080-P-1414A *Lead-free Support Tool In-circuit Emulator Flash Memory Built-in Type PX-ICE101C / D + PX-PRB101C29-LQFP080-P-1414A (under planning) Type ROM (x 8-bit) RAM (x 8-bit) Minimum instruction execution time Package MN101CF29D 64 K 1.5 K 0.10 s (at 4.5 V to 5.5 V, 20 MHz) LQFP080-P-1414A *Lead-free A16,NCS2(P54) MMOD MAD00025DEM 2 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2002 JUL |
Price & Availability of MN101C29D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |