 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 08/08/00 Errata: CS53L32A Datasheet Correction (Reference CS53L32A Data Sheet revision DS513PP1 dated Jul `00) The following is a correction to the CS53L32A datasheet revision DS513PP1 dated Jun '00. The changes in this errata will be corrected in the next revision of the datasheet. * * On page 9, the slave mode operation requires an exact 50% duty cycle LRCK. If this requirement is not met, the CS53L32A will produce erroneous data. On page 26, there is an additional requirement for pin 4 SDOUT in Stand-Alone mode. In Stand-Alone mode the state of pin 4 SDOUT, on startup, determines Master or Slave mode. To select Master mode pin 4 needs a 47kOhm pull-up resistor to VL (see figure 1). To select Slave Mode pin4 needs a 47kOhm pull-down resistor to ground (see figure 2). VL CS53L32A SDOUT 47 k Pin 4 SDOUT CS53L32A SDOUT 47 k Pin 4 SDOUT GND Figure 1. Stand-Alone Master Mode Figure 2. Stand-Alone Slave Mode If there are any questions concerning this information, Please contact Applications Engineering at 512-445-7222 or via email at proaudio@crystal.com Cirrus Logic P.O. Box 17847, Austin, Texas 78760 (512) 445 7222 FAX: (512) 445 7581 http://www.cirrus.com ER513B1 AUG '00 1 |
Price & Availability of ER513B1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |