View E423122_982375.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FUJITSU MEDIA DEVICE DATA SHEET
DS04-23122-5E
ASSP Mobile Communication Systems
Piezoelectric SAW BPF
(700 MHz to 1700 MHz)
F5CP/F6CP Series (D2 type)
s DESCRIPTION
The F5CP/F6CP series of SAW band pass filters have 2.5 mm x 2.0 mm x 0.9 mm (h) of ultra small package, which are available in the 700 MHz to 1700 MHz frequency range. They exhibit high stability by using single crystal, Lithium Tantalate (LiTaO3) with a large electro-mechanical coefficient. Typical applications for the F5CP/F6CP series include RF interstage filtering in mobile communications systems. Standard devices are available for AMPS, GSM, EGSM, PDC800, PDC1.5G.
s FEATURES
* Ultra compact and light package (2.5 mm x 2.0 mm x 0.9 mm (h) *) *: 1.0 mm height maximum * Excellent stop band attenuation * External matching are not required (50 I/O) * Standard devices are available for mobile communication standards
s PACKAGE
F5CP/F6CP Series (D2 type)
s PIN ASSIGNMENT
(BOTTOM VIEW)
1
2
4
3
s PIN DESCRIPTION
Pin No. 1 2 3 4 Symbol IN GND OUT GND Input pin Ground pin Output pin Ground pin Descriptions
2
F5CP/F6CP Series (D2 type)
s ABSOLUTE MAXIMUM RATINGS
Parameter Ambient operating temperature Storage temperature Input power F5CP Series F6CP Series Symbol Ta Tstg Pin Rating Min -30 -40 -5 Max +85 +100 +15 +10 +5 Unit C C dBm dBm V
Input DC voltage
WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
s RECOMMENDED OPERATING CONDITIONS
Parameter Operating temperature Symbol Ta Value Min -30 Max +85 Unit C
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating conditionranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand.
s STANDARD DEVICES
System AMPS/CDMA/ TDMA PDC1.5G TX RX TX Center Band width frequency (MHz) (MHz) 836.5 881.5 1441.0 25 25 24 Part symbol 3 4 7 R Part number FAR-F5CP-836M50-D203 FAR-F5CP-881M50-D204 FAR-F6CP-1G4410-D207 FAR-F6CP-1G4410-D20R Remarks
3
F5CP/F6CP Series (D2 type)
s ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE
1. SYSTEM : AMPS-Tx
PART NUMBER : FAR-F5CP-836M50-D203 Parameter Insertion loss In-band ripple Absolute attenuation In-band VSWR (Return loss) Conditions 824 MHz to 849 MHz 824 MHz to 849 MHz DC to 800 MHz 869 MHz to 1049 MHz 1049 MHz to 2000 MHz 824 MHz to 849 MHz Value Min 45 29 45 (8.5) Typ 3.0 1.1 50 35 50 1.9 (10.2) Max 3.5 1.6 2.2 () Unit dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -2.8742 dB 824 MHz 2 : -2.7828 dB 849 MHz 3 : -51.439 dB 800 MHz 4 : -34.045 dB 869 MHz
S11
1U FS
1 : 38.709
0.1641
31.689 pH 824 MHz 2 : 70.559 -11.789 849 MHz 3 : 2.6631 -30.007 800 MHz
2
4
1 2
4 : 13.117 -138.59 869 MHz
3
4 3 CENTER 835 MHz 1 : 38.223
CENTER 835 MHz S11 SWR 1/ 3 REF 1 4
SPAN 300 MHz 1 : 1.2937 824 MHz 2 : 1.4867 849 MHz 3 : 25.566 800 MHz 4 : 33.367 869 MHz
SPAN 300 MHz 1.1992
S22
1U FS
231.63 pH 824 MHz 2 : 70.09 -9.5508 849 MHz 3 : 2.4951 -30.189 800 MHz
1 2
4 : 13.344 -140.89 869 MHz
4 1 CENTER 835 MHz 2 SPAN 300 MHz 3 CENTER 835 MHz SPAN 300 MHz
4
F5CP/F6CP Series (D2 type)
2. SYSTEM : AMPS-Rx
PART NUMBER : FAR-F5CP-881M50-D204 Parameter Insertion loss In-band ripple Conditions 869 MHz to 894 MHz 869 MHz to 894 MHz DC to 779 MHz 779 MHz to 849 MHz Absolute attenuation 914 MHz to 970 MHz 970 MHz to 1049 MHz 1049 MHz to 2000 MHz In-band VSWR (Return loss) 869 MHz to 894 MHz Value Min 45 40 28 50 40 (8.5) Typ 2.9 1.0 50 47 33 60 50 1.9 (10.2) Max 3.5 1.6 2.2 () Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -2.8617 dB 869 MHz 2 : -3.0293 dB 894 MHz 3 : -56.249 dB 849 MHz 4 : -33.517 dB 914 MHz
S11
1U FS
1 : 52.887
-4.0195
45.564 pF 869 MHz 2 : 80.242 -14.598 894 MHz 3 : 2.4668 -22.392 849 MHz
2
4
1 2
4 : 12.961 -142.84 914 MHz
3 4 3 CENTER 880 MHz S11 SWR 1/ 3 REF 1 4 SPAN 300 MHz 1 : 1.1015 869 MHz 2 : 1.6896 894 MHz 3 : 24.367 849 MHz 4 : 35.586 914 MHz CENTER 880 MHz S22 1U FS 1 : 54.602 SPAN 300 MHz 1.627 297.97 pH 869 MHz 2 : 80.621 -8.7813 894 MHz 3 : 2.5654 -22.138 849 MHz 1 2 4 : 15.594 -156.26 914 MHz
4 3 1 CENTER 880 MHz 2 SPAN 300 MHz CENTER 880 MHz SPAN 300 MHz
5
F5CP/F6CP Series (D2 type)
3. SYSTEM : PDC1.5G-Tx
PART NUMBER : FAR-F6CP-1G4410-D207 Parameter Insertion loss In-band ripple Conditions 1429 MHz to 1453 MHz 1429 MHz to 1453 MHz DC to 1380 MHz 1477 MHz to 1501 MHz Absolute attenuation 1501 MHz to 1607 MHz 1607 MHz to 1900 MHz 1900 MHz to 3000 MHz In-band VSWR (Return loss) 1429 MHz to 1453 MHz Value Min 40 25 28 45 30 (7.0) Typ 3.5 1.3 45 28 30 55 33 2.4 (7.7) Max 3.8 1.6 2.6 () Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/ 1
REF 0 dB
1 : -2.6466 dB 1.429 GHz 2 : -2.8931 dB 1.453 GHz 3 : -48.237 dB 1.38 GHz 4 : -30.021 dB 1.477 GHz 5 : -61.614 dB 1.607 GHz
S11
1U FS
1 : 39.924
0.0859
9.5712 pH 1.429 GHz 2 : 66.582 -14.813 1.453 GHz 3 : 3.9805 -24.466 1.38 GHz
2
4
1 2
4 : 15.57 -133.34 1.477 GHz 5 : 7.3418 -55.936 1.607 GHz
3 5
4 3 CENTER 1 450 MHz S11 SWR 3 1/ REF 1 4 5 1 : 1.2523 1.429 GHz 2 : 1.4666 1.453 GHz 3 : 15.581 1.38 GHz 4 : 26.309 1.477 GHz 5 : 15.408 1.607 GHz SPAN 400 MHz CENTER 1 450 MHz 5 SPAN 400 MHz 0.4395
S22
1U FS
1 : 39.836
48.944 pH 1.429 GHz 2 : 67.617 -12.059 1.453 GHz 3 : 4.1484 -25.398 1.38 GHz
1 2
4 : 23.188 -166.48 1.477 GHz 5 : 8.541 -61.674 1.607 GHz
4 1 CENTER 1 450 MHz 2 SPAN 400 MHz 3 5 CENTER 1 450 MHz SPAN 400 MHz
6
F5CP/F6CP Series (D2 type)
4. SYSTEM : PDC1.5G-Tx
PART NUMBER : FAR-F6CP-1G4410-D20R Parameter Insertion loss In-band ripple Conditions 1429 MHz to 1453 MHz 1429 MHz to 1453 MHz DC to 1380 MHz 1477 MHz to 1501 MHz Absolute attenuation 1501 MHz to 1607 MHz 1607 MHz to 1900 MHz 1900 MHz to 3000 MHz In-band VSWR (Return loss) 1429 MHz to 1453 MHz Value Min 40 20 28 45 30 (7.4) Typ 2.5 0.8 45 32 32 51 45 1.7 (11.7) Max 3.0 1.4 2.5 () Unit dB dB dB dB dB dB dB (dB) Remarks
S21
log MAG
10 dB/
REF 0 dB
1 : -49.815 dB 1.38 GHz 2 : -2.4229 dB 1.429 GHz 3 : -2.5064 dB 1.453 GHz 4 : -32.603 dB 1.477 GHz 5 : -33.819 dB 1.501 GHz
S11
1U FS
1 : 3.01006
-30.558
23
3.7742 pF 1.38 GHz CH1 Markers 2 : 39.143 -3.5684 1.429 GHz 3 : 60.367 -10.139 1.453 GHz 4 : 16.492 -154.35 1.477 GHz
4 1
5
2
3
5 : 14.699 -81.426 1.501 GHz 4 5
1
CENTER 1 450 MHz S11 SWR 1 1/ REF 1 45
SPAN 400 MHz
CENTER 1 450 MHz 1 : 3.1895
SPAN 400 MHz -31.245
S22 1 : 22.149 1.38 GHz 2 : 1.2938 1.429 GHz 3 : 1.3010 1.453 GHz 4 : 32.211 1.477 GHz 5 : 12.634 1.501 GHz
1U FS
3.6911 pF 1.38 GHz 2 : 39.359 -3.7520 1.429 GHz 3 : 62.402 -5.4785 1.453 GHz 4 : 17.336 -161.48 1.477 GHz
2
3
5 : 16.094 -84.156 1.501 GHz
4 1 5 CENTER 1 450 MHz 23 SPAN 400 MHz CENTER 1 450 MHz SPAN 400 MHz
7
F5CP/F6CP Series (D2 type)
s MEASUREMENT CIRCUIT
Network Analyzer 1 50 Filter 2, 4 3
Network Analyzer
50
1 to 4 : Pin numbers
s PART NUMBER DESIGNATION
[Designation example] FAR-F5CP(1) (2) (1) Frequency range (2) (3) -D2 (3) (4) (5)
(4) (5)
5 : 700 MHz to 1000 MHz 6 : 1000 MHz to 1700 MHz Package size P : 2.5 mm x 2.0 mm x 0.9 mm Frequency This specifies the nominal center frequency using six alphanumeric. M (for MHz) or G (for GHz) indicates the decimal point. [Example] 836.5 MHz 836M50 1.441 GHz 1G4410 Part symbol Numbers specified by Fujitsu Refer to sSTANDARD DEVICES Packing (Reeled tape) K : 1000 pcs / reel J : 5000 pcs / reel
s MARKING
Production date (EIAJ) Part symbol Lot Code
INDEX
8
F5CP/F6CP Series (D2 type)
s PACKAGE DIMENSION
0.9 0.10 2.5 0.10 3
0.88 0.10
4
2.0 0.10
0.63 0.10 1 0.5 Min
(C 030) INDEX
2 4 - R0.18 0.5 Min
Dimensions in mm.
s RECOMMENDED FOOT PATTERN ON PCB
0.88 0.5 0.8 1.2 0.5 1.2 0.88
0.5
Dimensions in mm.
9
F5CP/F6CP Series (D2 type)
s PACKING
(1) Reel dimensions
1.5 Min 20.2 Min 12.8 Min 250.0 80.0 R0.58 9.5 0.5 13.8 Max
Type K J
Volume 1000 pcs 5000 pcs Dimensions in mm.
(2) Packing style
Pulling side
Reel side
Pulling side
#1 PIN
10
F5CP/F6CP Series (D2 type)
(3) Tape dimensions
1.5 -0.0
+0.1
2.0 0.05
4.0 0.1
1.75 0.1
0.3 0.05
3.5 0.05 1.0 Min 2.3 0.1 4.0 0.1
2.8 0.1
1.0 -0.0
8.0 0.2
+0.1
Dimensions in mm.
(4) Peel strength of top cover tape Peel off by the force of 0.1 N to 1.0 N under the condition at the right . (Conforms to EIA)
165 to 180
Direction of pulling Speed 300 mm/min
Embossment carrier type tape
11
F5CP/F6CP Series (D2 type)
s RECOMMENDED REFLOW PROFILE
240 10 s Heating rate 1C/s to 4 C/s Temperature (C) 210
Air cooling 60 s Pre-Heating 150 60 s 90 s
Time (s)
s NOTE
Mass-produced product order is accepted by a unit of 1000.
12
F5CP/F6CP Series (D2 type)
FUJITSU MEDIA DEVICES LIMITED
All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MEDIA DEVICES electronic device; FUJITSU MEDIA DEVICES does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MEDIA DEVICES assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MEDIA DEVICES or any third party or does FUJITSU MEDIA DEVICES warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MEDIA DEVICES assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU MEDIA DEVICES will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan.
F0308 (c) FUJITSU LIMITED Printed in Japan

▲Up To Search▲

Price & Availability of E423122

	To Download E423122 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .