 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STB5NA50 N - CHANNEL ENHANCEMENT MODE FAST POWER MOS TRANSISTOR TYPE STB5NA50 s s s s s s s s V DSS 500 V R DS(on) < 1.6 ID 5A s TYPICAL RDS(on) = 1.2 30V GATE TO SOURCE VOLTAGE RATING 100% AVALANCHE TESTED REPETITIVE AVALANCHE DATA AT 100oC LOW INTRINSIC CAPACITANCES GATE CHARGE MINIMIZED REDUCED THRESHOLD VOLTAGE SPREAD THROUGH-HOLE I2PAK (TO-262) POWER PACKAGE IN TUBE (SUFFIX "-1") SURFACE-MOUNTING D2PACK (TO-263) POWER PACKAGE IN TUBE (NO SUFFIX) OR IN TAPE & REEL (SUFFIX "T4") 3 12 3 1 I2PAK TO-262 D2PAK TO-263 APPLICATIONS HIGH CURRENT, HIGH SPEED SWITCHING s SWITCH MODE POWER SUPPLIES (SMPS) s DC-AC CONVERTERS FOR WELDING EQUIPMENT AND UNINTERRUPTIBLE POWER SUPPLIES AND MOTOR DRIVE s INTERNAL SCHEMATIC DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol V DS V DGR V GS ID ID I DM (*) P tot T stg Tj Parameter Drain-source Voltage (V GS = 0) Drain- gate Voltage (R GS = 20 k) Gate-source Voltage Drain Current (continuous) at T c = 25 C Drain Current (continuous) at T c = 100 o C Drain Current (pulsed) Total Dissipation at T c = 25 C Derating Factor Storage Temperature Max. Operating Junction Temperature o o Value 500 500 30 5 3.3 20 100 0.8 -65 to 150 150 Unit V V V A A A W W/ o C o o C C (*) Pulse width limited by safe operating area October 1995 1/10 STB5NA50 THERMAL DATA R thj-case R thj-amb R thc-sink Tl Thermal Resistance Junction-case Thermal Resistance Junction-ambient Thermal Resistance Case-sink Maximum Lead Temperature For Soldering Purpose Max Max Typ 1.25 62.5 0.5 300 o o C/W C/W o C/W o C AVALANCHE CHARACTERISTICS Symbol I AR E AS E AR I AR Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by T j max, < 1%) Single Pulse Avalanche Energy (starting T j = 25 o C, ID = I AR , V DD = 50 V) Repetitive Avalanche Energy (pulse width limited by T j max, < 1%) Avalanche Current, Repetitive or Not-Repetitive (T c = 100 o C, pulse width limited by T j max, < 1%) Max Value 5 125 5.5 3.3 Unit A mJ mJ A ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified) OFF Symbol V (BR)DSS I DSS I GSS Parameter Drain-source Breakdown Voltage Test Conditions I D = 250 A VGS = 0 Min. 500 250 1000 100 Typ. Max. Unit V A A nA Zero Gate Voltage V DS = Max Rating Drain Current (V GS = 0) V DS = Max Rating x 0.8 Gate-body Leakage Current (V DS = 0) V GS = 30 V T c = 125 o C ON () Symbol V GS(th) R DS(on) ID(on) Parameter Gate Threshold Voltage V DS = V GS Static Drain-source On Resistance Test Conditions ID = 250 A T c = 100 o C 5 Min. 2.25 Typ. 3 1.3 Max. 3.75 1.6 3.2 Unit V A V GS = 10V I D = 2.5 A V GS = 10V ID = 2.5 A On State Drain Current V DS > I D(on) x R DS(on)max V GS = 10 V DYNAMIC Symbol g fs () C iss C oss C rss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions V DS > I D(on) x R DS(on)max V DS = 25 V f = 1 MHz I D = 2.5 A V GS = 0 Min. 2.7 Typ. 4 700 115 30 930 155 45 Max. Unit S pF pF pF 2/10 STB5NA50 ELECTRICAL CHARACTERISTICS (continued) SWITCHING ON Symbol t d(on) tr (di/dt) on Parameter Turn-on Time Rise Time Turn-on Current Slope Test Conditions V DD = 250 V I D = 2.5 A R G = 15 V GS = 10 V (see test circuit, figure 3) V DD = 400 V I D = 5 A R G = 15 V GS = 10 V (see test circuit, figure 5) V DD = 400 V ID = 5 A V GS = 10 V Min. Typ. 17 30 450 Max. 25 40 Unit ns ns A/s Qg Q gs Q gd Total Gate Charge Gate-Source Charge Gate-Drain Charge 32 7 14 45 nC nC nC SWITCHING OFF Symbol t r(Voff) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions V DD = 400 V I D = 5 A R G = 15 V GS = 10 V (see test circuit, figure 5) Min. Typ. 18 12 30 Max. 25 18 42 Unit ns ns ns SOURCE DRAIN DIODE Symbol I SD I SDM (*) V SD () t rr Q rr I RRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current I SD = 5 A V GS = 0 380 3.8 20 I SD = 5 A di/dt = 100 A/s V DD = 50 V T j = 150 o C (see test circuit, figure 5) Test Conditions Min. Typ. Max. 5 20 1.6 Unit A A V ns C A () Pulsed: Pulse duration = 300 s, duty cycle 1.5 % (*) Pulse width limited by safe operating area Safe Operating Area Thermal Impedance 3/10 STB5NA50 Derating Curve Output Characteristics Transfer Characteristics Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage 4/10 STB5NA50 Capacitance Variations Normalized Gate Threshold Voltage vs Temperature Normalized On Resistance vs Temperature Turn-on Current Slope Turn-off Drain-source Voltage Slope Cross-over Time 5/10 STB5NA50 Switching Safe Operating Area Accidental Overload Area Source-drain Diode Forward Characteristics Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform 6/10 STB5NA50 Fig. 3: Switching Times Test Circuits For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And DIode Recovery Times 7/10 STB5NA50 TO-262 (I2PAK) MECHANICAL DATA mm MIN. A A1 B B1 B2 C C2 D e E L L1 L2 4.3 2.49 0.7 1.2 1.25 0.45 1.21 9 2.44 10 13.2 3.48 1.27 TYP. MAX. 4.6 2.69 0.93 1.38 1.4 0.6 1.36 9.35 2.64 10.28 13.5 3.78 1.37 MIN. 0.169 0.098 0.027 0.047 0.049 0.017 0.047 0.354 0.096 0.393 0.519 0.137 0.050 inch TYP. MAX. 0.181 0.106 0.036 0.054 0.055 0.023 0.053 0.368 0.104 0.404 0.531 0.149 0.054 DIM. A C2 B2 B E L1 L2 D L 8/10 e A1 C STB5NA50 TO-263 (D2PAK) MECHANICAL DATA mm MIN. A A1 B B2 C C2 D E G L L2 L3 4.3 2.49 0.7 1.25 0.45 1.21 9 10 4.88 15 1.27 1.4 TYP. MAX. 4.6 2.69 0.93 1.4 0.6 1.36 9.35 10.28 5.28 15.85 1.37 1.75 MIN. 0.169 0.098 0.027 0.049 0.017 0.047 0.354 0.393 0.192 0.590 0.050 0.055 inch TYP. MAX. 0.181 0.106 0.036 0.055 0.023 0.053 0.368 0.404 0.208 0.624 0.054 0.068 DIM. E C2 L2 A D L L3 B2 B G A1 C 9/10 STB5NA50 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. (c) 1995 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A ... 10/10 |
Price & Availability of 4231
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |