View 1595_963138.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number: EN2704B
Monolithic Linear IC
LA6324N, 6324NM
High-Performance Quad Operational Amplifier
Overview
The LA6324 consists of four independent, high-performance, internally phase compensated operational amplifiers that are designed to operate from a single power supply over a wide range of voltages. These four operational amplifiers are packaged in a single package. As in case of conventional general-purpose operational amplifiers, operation from dual power supplies is also possible and the power dissipation is low. It can be applied to various uses in commercial and industrial equipment including all types of transducer amplifiers and DC amplifiers.
Package Dimensions
unit : mm
3003A-DIP14
[LA6324N]
Features
. No phase compensation required . Wide operating voltage range: . . .
3.0 V to 30.0 V (single supply) 1.5 V to 15.0 V (dual supplies) Highly resistant to dielectric breakdown Input voltage range includes the neighborhood of GND level and output voltage range VOUT is from 0 to VCC - 1.5 V. Small current dissipation: ICC = 0.6 mA typ/VCC = +5 V, RL = unit : mm
SANYO : DIP14
3034A-MFP14
[LA6324NM]
SANYO : MFP14
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
63096HA(II)/4138TA(KOTO) No.2704-1/5
LA6324N, 6324NM
Specifications
Maximum Ratings at Ta = 25C
Parameter Maximum supply voltage Differential input voltage Maximum input voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max VID VIN max Pd max Topr Tstg LA6324N LA6324NM Conditions Ratings 32 32 -0.3 to +32 720 330 -30 to +85 -55 to +125 Unit V V V mW mW C C
Operating Characteristics at Ta = 25C, VCC = +5 V
Parameter Input offset voltage Input offset current Input bias current Common-mode input voltage range Common-mode rejection ratio Voltage gain Output voltage range Supply voltage rejection ratio Channel separation Current drain Output current (Source) Output current (Sink) Symbol VIO IIO IB VICM CMR VG VOUT SVR CS ICC ICC IO source IO sink VCC = 30 V VIN+ = 1 V, VIN- = 0 V VIN+ = 0 V, VIN- = 1 V f = 1 k to 20 kHz 6 7 8 8 9 10 20 10 VCC = 15 V, RL ^ 2 k IIN(+) / IIN(-) IIN(+) / IIN(-) Conditions Test circuit 1 2 3 4 4 5 0 65 25 0 65 100 120 0.6 1.5 40 20 2 3 80 100 VCC - 1.5 min typ 2 5 45 max 7 50 250 VCC - 1.5 Unit mV nA nA V dB V/mV V dB dB mA mA mA mA
Equivalent Circuit
(1 unit)
Pin Assignment
(LA6324N, 6324NM)
Top view
No.2704-2/5
LA6324N, 6324NM
Test Circuit
1. Input offset voltage VIO 2. Input offset current IIO
3. Input bias current IB
4. Common-mode rejection ratio CMR Common-mode input voltage range VICM
5. Voltage gain VG
6. Supply voltage rejection ratio SVR
7. Channel separation CS SW: a
SW: b
These apply also to other channels.
No.2704-3/5
LA6324N, 6324NM
8. Current drain ICC 9. Output current IO source 10. Output current IO sink
ICC - VCC Current drain, ICC - mA Input bias current, IB - nA
IB - VCC
Supply voltage, VCC - V IO (source) - Ta Output current, IO (source) - mA
Supply voltage, VCC - V VG - VCC
Ambient temperature, Ta - C Output voltage amplitude, VOUT - Vp-p VO - f
Voltage gain, VG - dB
Supply voltage, VCC - V VG - f
Voltage gain, VG - dB
VCC = 30 V 10 to 15 V
Frequency, f - Hz
Frequency, f - Hz No.2704-4/5
LA6324N, 6324NM
Allowable power dissipation, Pd max - mW
Ambient temperature, Ta - C
Allowable power dissipation, Pd max - mW
Pd max - Ta
Pd max - Ta
Ambient temperature, Ta - C
Sample Application Circuits
Noninverting DC amplifier Rectangular wave oscillator Inverting AC amplifier
Unit (resistance: , capacitance: F)
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of June, 1996. Specifications and information herein are subject to change without notice. PS No.2704-5/5

▲Up To Search▲

Price & Availability of 1595

	To Download 1595 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .