View MRF1570FT1_849772.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

( DataSheet : www..com )
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Order this document by MRF1570T1/D
The RF MOSFET Line
RF Power Field Effect Transistors
N-Channel Enhancement-Mode Lateral MOSFETs
Designed for broadband commercial and industrial applications with frequencies up to 470 MHz. The high gain and broadband performance of these devices make them ideal for large-signal, common source amplifier applications in 12.5 volt mobile FM equipment. * Specified Performance @ 470 MHz, 12.5 Volts Output Power -- 70 Watts Power Gain -- 10 dB Efficiency -- 50% * Capable of Handling 20:1 VSWR, @ 15.6 Vdc, 470 MHz, 2 dB Overdrive * Excellent Thermal Stability * Characterized with Series Equivalent Large-Signal Impedance Parameters * Broadband-Full Power Across the Band: 135-175 MHz 400-470 MHz * Broadband Demonstration Amplifier Information Available Upon Request * Available in Tape and Reel. T1 Suffix = 500 Units per 44 mm, 13 inch Reel.
MRF1570T1 MRF1570FT1
470 MHz, 70 W, 12.5 V LATERAL N-CHANNEL BROADBAND RF POWER MOSFETs
CASE 1366-03, STYLE 1 TO-272 SPLIT LEAD PLASTIC MRF1570T1
CASE 1366A-02, STYLE 1 TO-272 STRAIGHT LEAD PLASTIC MRF1570FT1
MAXIMUM RATINGS
Rating Drain-Source Voltage Gate-Source Voltage Total Device Dissipation @ TC = 25C Derate above 25C Storage Temperature Range Operating Junction Temperature Symbol VDSS VGS PD Tstg TJ Value 40 20 165 0.5 - 65 to +150 175 Unit Vdc Vdc Watts W/C C C
ESD PROTECTION CHARACTERISTICS
Test Conditions Human Body Model Machine Model Charge Device Model Class 1 (Minimum) M2 (Minimum) C2 (Minimum)
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction to Case Symbol RJC Max 0.75 Unit C/W
NOTE - CAUTION - MOS devices are susceptible to damage from electrostatic charge. Reasonable precautions in handling and packaging MOS devices should be observed.
www..com
REV 2
Motorola, Inc. 2002 www..com
MOTOROLA RF DEVICE DATA
MRF1570T1 MRF1570FT1 1
ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted)
Characteristic OFF CHARACTERISTICS Zero Gate Voltage Drain Current (VDS = 60 Vdc, VGS = 0 Vdc) ON CHARACTERISTICS Gate Threshold Voltage (VDS = 12.5 Vdc, ID = 0.8 mAdc) Drain-Source On-Voltage (VGS = 10 Vdc, ID = 2.0 Adc) DYNAMIC CHARACTERISTICS Input Capacitance (Includes Input Matching Capacitance) (VDS = 12.5 Vdc, VGS = 0 V, f = 1 MHz) Output Capacitance (VDS = 12.5 Vdc, VGS = 0 V, f = 1 MHz) Reverse Transfer Capacitance (VDS = 12.5 Vdc, VGS = 0 V, f = 1 MHz) RF CHARACTERISTICS (In Motorola Test Fixture) Common-Source Amplifier Power Gain (VDD = 12.5 Vdc, Pout = 70 W, IDQ = 800 mA) Drain Efficiency (VDD = 12.5 Vdc, Pout = 70 W, IDQ = 800 mA) Gps f = 470 MHz f = 470 MHz 50 -- -- 10 -- -- % No Degradation in Output Power Before and After Test dB Ciss Coss Crss -- -- -- -- -- -- 500 250 35 pF pF pF VGS(th) VDS(on) 1.0 -- -- -- 3 1 Vdc Vdc IDSS -- -- 1 A Symbol Min Typ Max Unit
Load Mismatch (VDD = 15.6 Vdc, f = 470 MHz, 2 dB Input Overdrive, VSWR 20:1 at All Phase Angles)
MRF1570T1 MRF1570FT1 2
MOTOROLA RF DEVICE DATA
VGG C14 C13 C12
B1 + C11 R1 Z2 L1 C4 Z4 L3 C6 Z6 R3 Z8 Z10 Z12 C20 DUT C21 R4 Z3 L2 C5 Z5 L4 C7 B2 C19 C18 C17 + C16 Z7 C9 R2 Z9 Z11 Z13 Z15 L10 C23 C10 C38 C37 L9 Z14 C22
B3 B4 C36 C35 C34
+ VDD C33
Z16 C24
L5 C26
L7 C28
Z18 C30 RF OUTPUT C32
RF INPUT C1 Z1 C2 C3
C8
Z20 C25 Z17 C27 L6 L8 C29 B5
Z22
Z21 Z19
C31
VGG
C15
C44
C43
B6
C42
C41
C40
+ VDD C39
B1, B2, B3, B4, B5, B6 C1, C32, C37, C43 C2, C20, C21 C3 C4, C5 C6, C7 C8, C9 C10, C15 C11, C16, C33, C39 C12, C17, C34, C40 C13, C18, C35, C41 C14, C19, C36, C42 C22, C23 C24, C25 C26, C27 C28, C29 C30, C31 C38, C44 L1, L2
Long Ferrite Beads, Fair Rite Products 270 pF, 100 mil Chip Capacitors 33 pF, 100 mil Chip Capacitors 18 pF, 100 mil Chip Capacitor 30 pF, 100 mil Chip Capacitors 180 pF, 100 mil Chip Capacitors 150 pF, 100 mil Chip Capacitors 300 pF, 100 mil Chip Capacitors 10 F, 50 V Electrolytic Capacitors 0.1 F, 100 mil Chip Capacitors 1000 pF, 100 mil Chip Capacitors 470 pF, 100 mil Chip Capacitors 110 pF, 100 mil Chip Capacitors 68 pF, 100 mil Chip Capacitors 120 pF, 100 mil Chip Capacitors 24 pF, 100 mil Chip Capacitors 27 pF, 100 mil Chip Capacitors 240 pF, 100 mil Chip Capacitors 17.5 nH, 6 Turn Inductors, Coilcraft
L3, L4 L5, L6, L7, L8 L9, L10 N1, N2 R1, R2 R3, R4 Z1 Z2, Z3 Z4, Z5 Z6, Z7 Z8, Z9, Z10, Z11 Z12, Z13 Z14, Z15 Z16, Z17 Z18, Z19 Z20, Z21 Z22 Board
5 nH, 2 Turn Inductors, Coilcraft 1 Turn, #18 AWG, 0.33 ID Inductors 3 Turn, #16 AWG, 0.165 ID Inductors Type N Flange Mounts 25.5 Chip Resistors (1206) 9.3 Chip Resistors (1206) 0.32 x 0.080 Microstrip 0.46 x 0.080 Microstrip 0.34 x 0.080 Microstrip 0.45 x 0.080 Microstrip 0.28 x 0.240 Microstrip 0.39 x 0.080 Microstrip 0.27 x 0.080 Microstrip 0.25 x 0.080 Microstrip 0.29 x 0.080 Microstrip 0.14 x 0.080 Microstrip 0.32 x 0.080 Microstrip 31 mil Glass Teflon
Figure 1. 135 - 175 MHz Broadband Test Circuit Schematic
MOTOROLA RF DEVICE DATA
MRF1570T1 MRF1570FT1 3
VGG C11 GND B1 C12 C13 C14 C2 C4 L1 L3 C38 C6 C10 R1 C8 R3 R4 C9 L9 C22 C23 L10 C44 C37 C20 C24 C26 C27 C21 C25 C43 B5 B6 C39 MRF1570T1 L6 L5 B3 B4 C33
VDD
GND
C28 C36 C35 C34 L7 C30 C31 C32
C1
C3
C5
L4 L2 C7
C17 C18 C19 B2 C16
R2 C15
L8
C29 C42 C41 C40
Figure 2. 135 - 175 MHz Broadband Test Circuit Component Layout
TYPICAL CHARACTERISTICS, 135 - 175 MHZ
100 Pout , OUTPUT POWER (WATTS) IRL, INPUT RETURN LOSS (dB) 80 135 MHz 60 40 150 MHz 20 0 VDD = 12.5 Vdc 0 1 2 3 4 5 6 175 MHz 0
-5 135 MHz -10 175 MHz 155 MHz -15 VDD = 12.5 Vdc -20 10 20 30 40 50 60 70 80 90
Pin, INPUT POWER (WATTS)
Pout, OUTPUT POWER (WATTS)
Figure 3. Output Power versus Input Power
Figure 4. Input Return Loss versus Output Power
MRF1570T1 MRF1570FT1 4
MOTOROLA RF DEVICE DATA
TYPICAL CHARACTERISTICS, 135 - 175 MHZ
18 17 G ps , POWER GAIN (dB) 16 15 14 13 12 10 155 MHz 175 MHz 135 MHz VDD = 12.5 Vdc , DRAIN EFFICIENCY (%) 60 50 40 30 VDD = 12.5 Vdc 20 30 40 50 60 70 80 90 20 10 20 30 40 50 60 70 80 90 70 155 MHz 175 MHz 135 MHz
Pout, OUTPUT POWER (WATTS)
Pout, OUTPUT POWER (WATTS)
Figure 5. Gain versus Output Power
Figure 6. Drain Efficiency versus Output Power
90
100 80 60 40 20 0 400
Pout , OUTPUT POWER (WATTS)
80
135 MHz 155 MHz 175 MHz
, DRAIN EFFICIENCY (%)
155 MHz 175 MHz 135 MHz
70
60 VDD = 12.5 Vdc Pin = 36 dBm 50 400 600 800 1000 1200 1400 1600
VDD = 12.5 Vdc Pin = 36 dBm 600 800 1000 1200 1400 1600
IDQ, BIASING CURRENT (mA)
IDQ, BIASING CURRENT (mA)
Figure 7. Output Power versus Biasing Current
Figure 8. Drain Efficiency versus Biasing Current
100 Pout , OUTPUT POWER (WATTS) 80 60 40 20 0 10
100 80 60 40 20 0 155 MHz 175 MHz 135 MHz
175 MHz 155 MHz
, DRAIN EFFICIENCY (%)
135 MHz
Pin = 36 dBm IDQ = 800 mA 11 12 13 14 15
Pin = 36 dBm IDQ = 800 mA 10 11 12 13 14 15
VDD, SUPPLY VOLTAGE (VOLTS)
VDD, SUPPLY VOLTAGE (VOLTS)
Figure 9. Output Power versus Supply Voltage
Figure 10. Drain Efficiency versus Supply Voltage
MOTOROLA RF DEVICE DATA
MRF1570T1 MRF1570FT1 5
B1 VGG C14 C13 C12 + C11 R1 Z3 RF INPUT R3 Z5 Z7 C7 Z9 C21 C10 C9 C37 L5 Z11
B3 B4 C36 C35 C34
+ VDD C33
Z13 C23
Z15 C25
L1
L3 C27
Z17 C29 RF OUTPUT C32
C1
Z1 C2
Z2 C3 C4
C5
DUT
Z19 C22 R4 Z4 C6 R2 Z6 Z8 C8 Z10 Z12 L6 B5 C16 C15 C42 B6 C41 C40 C39 Z14 Z16 C26 L2 L4 C28 Z18 C24 C31
C30
VGG C20 C19 C18
B2 + C17
+ VDD C38
B1, B2, B3, B4, B5, B6 C1, C9, C15, C32 C2, C3 C4 C5, C6 C7, C8 C10, C16, C37, C42 C11, C17, C33, C38 C12, C18, C34, C39 C13, C19, C35, C40 C14, C20, C36, C41 C21, C22 C23, C24 C25, C26 C27, C28 C29, C30 C31
Long Ferrite Beads, Fair Rite Products 270 pF, 100 mil Chip Capacitors 7.5 pF, 100 mil Chip Capacitors 5.1 pF, 100 mil Chip Capacitor 180 pF, 100 mil Chip Capacitors 47 pF, 100 mil Chip Capacitors 120 pF, 100 mil Chip Capacitors 10 F, 50 V Electrolytic Capacitors 470 pF, 100 mil Chip Capacitors 1200 pF, 100 mil Chip Capacitors 0.1 F, 100 mil Chip Capacitors 33 pF, 100 mil Chip Capacitors 27 pF, 100 mil Chip Capacitors 15 pF, 100 mil Chip Capacitors 2.2 pF, 100 mil Chip Capacitors 6.2 pF, 100 mil Chip Capacitors 1.0 pF, 100 mil Chip Capacitor
L1, L2, L3, L4 L5, L6 N1, N2 R1, R2 R3, R4 Z1 Z2 Z3, Z4 Z5, Z6 Z7, Z8 Z9, Z10 Z11, Z12 Z13, Z14 Z15, Z16 Z17, Z18 Z19 Board
1 Turn, #18 AWG, 0.085 ID Inductors 2 Turn, #16 AWG, 0.165 ID Inductors Type N Flange Mounts 25.5 Chip Resistors (1206) 10 Chip Resistors (1206) 0.240 x 0.080 Microstrip 0.185 x 0.080 Microstrip 1.500 x 0.080 Microstrip 0.150 x 0.240 Microstrip 0.140 x 0.240 Microstrip 0.140 x 0.240 Microstrip 0.150 x 0.240 Microstrip 0.270 x 0.080 Microstrip 0.680 x 0.080 Microstrip 0.320 x 0.080 Microstrip 0.380 x 0.080 Microstrip 31 mil Glass Teflon
Figure 11. 400 - 470 MHz Broadband Test Circuit Schematic
MRF1570T1 MRF1570FT1 6
MOTOROLA RF DEVICE DATA
VGG C11 GND B1 C12 C13 C14 C2 C4 C3 C18 C19 C20 B2 C17 R2 C15 C42 C16 MRF1570T1 B5 B6 C38 C6 C10 C37 C9 R1 C5 C7 R3 R4 C8 C21 C23 C22 C24 L5 C25 C26 L6 L2 L4 L1 B3 B4 C33
VDD
GND
C1
C27 C34 C35 C36 L3 C29 C31 C30 C32
C28 C39 C40 C41
Figure 12. 400 - 470 MHz Broadband Test Circuit Component Layout
TYPICAL CHARACTERISTICS, 400 - 470 MHZ
100 Pout , OUTPUT POWER (WATTS) 80 60 440 MHz 40 20 VDD = 12.5 Vdc 0 0 1 2 3 4 5 6 7 8 -20 0 10 20 30 40 50 400 MHz 470 MHz IRL, INPUT RETURN LOSS (dB) 0 VDD = 12.5 Vdc -5
-10 440 MHz -15 400 MHz 470 MHz 60 70 80
Pin, INPUT POWER (WATTS)
Pout, OUTPUT POWER (WATTS)
Figure 13. Output Power versus Input Power
Figure 14. Input Return Loss versus Output Power
MOTOROLA RF DEVICE DATA
MRF1570T1 MRF1570FT1 7
TYPICAL CHARACTERISTICS, 400 - 470 MHZ
17 15 G ps , POWER GAIN (dB) 13 11 9 7 VDD = 12.5 Vdc 5 0 10 20 30 40 50 60 70 80 70 60 440 MHz 470 MHz , DRAIN EFFICIENCY (%) 400 MHz 50 40 30 20 10 0 0 10 20 30 40 50 VDD = 12.5 Vdc 60 70 80 400 MHz 470 MHz 440 MHz
Pout, OUTPUT POWER (WATTS)
Pout, OUTPUT POWER (WATTS)
Figure 15. Gain versus Output Power
Figure 16. Drain Efficiency versus Output Power
90 Pout , OUTPUT POWER (WATTS)
100 80 60 40 20 0 400
80
470 MHz
, DRAIN EFFICIENCY (%)
440 MHz 400 MHz
470 MHz 400 MHz 440 MHz
70
60 VDD = 12.5 Vdc Pin = 38 dBm 600 800 1000 1200 1400 1600
VDD = 12.5 Vdc Pin = 38 dBm 600 800 1000 1200 1400 1600
50 400
IDQ, BIASING CURRENT (mA)
IDQ, BIASING CURRENT (mA)
Figure 17. Output Power versus Biasing Current
Figure 18. Drain Efficiency versus Biasing Current
100 Pout , OUTPUT POWER (WATTS) 90 80 70 60 50 40 10 Pin = 38 dBm IDQ = 800 mA 11 12 13 14 15 400 MHz 470 MHz 440 MHz , DRAIN EFFICIENCY (%)
100 80 60 40 400 MHz 440 MHz 470 MHz
20 0 10
Pin = 38 dBm IDQ = 800 mA 11 12 13 14 15
VDD, SUPPLY VOLTAGE (VOLTS)
VDD, SUPPLY VOLTAGE (VOLTS)
Figure 19. Output Power versus Supply Voltage
Figure 20. Drain Efficiency versus Supply Voltage
MRF1570T1 MRF1570FT1 8
MOTOROLA RF DEVICE DATA
VGG C13 C12 C11
B1 + C10 R1 Z2 Z4 C2 C1 Z1 C4 R3 Z6 Z8 C6 DUT Z10 C20 C9 C8 C33 L3 Z12
B3 B4 C32 C31 C30
+ VDD C29
Z14
Z16 C24
L1
Z18 C26 RF OUTPUT C28
RF INPUT
C22
Z20 R4 Z3 C3 Z5 C5 R2 Z7 Z9 C7 Z11 C21 C23 Z13 L4 B5 C15 C14 C38 B6 C37 C36 C35 Z15 Z17 C25 L2 Z19
C27
VGG C19 C18 C17
B2 + C16
+ VDD C34
B1, B2, B3, B4, B5, B6 C1, C8, C14, C28 C2, C3 C4, C5 C6, C7 C9, C15, C33, C38 C10, C16, C29, C34 C11, C17, C30, C35 C12, C18, C31, C36 C13, C19, C32, C37 C20, C21 C22, C23 C24, C25, C26, C27 L1, L2 L3, L4
Long Ferrite Beads, Fair Rite Products 270 pF, 100 mil Chip Capacitors 10 pF, 100 mil Chip Capacitors 180 pF, 100 mil Chip Capacitors 47 pF, 100 mil Chip Capacitors 120 pF, 100 mil Chip Capacitors 10 F, 50 V Electrolytic Capacitors 470 pF, 100 mil Chip Capacitors 1200 pF, 100 mil Chip Capacitors 0.1 F, 100 mil Chip Capacitors 22 pF, 100 mil Chip Capacitors 20 pF, 100 mil Chip Capacitors 5.1 pF, 100 mil Chip Capacitors 1 Turn, #18 AWG, 0.115 ID Inductors 2 Turn, #16 AWG, 0.165 ID Inductors
N1, N2 R1, R2 R3, R4 Z1 Z2, Z3 Z4, Z5 Z6, Z7 Z8, Z9 Z10, Z11 Z12, Z13 Z14, Z15 Z16, Z17 Z18, Z19 Z20 Board
Type N Flange Mounts 1.0 k Chip Resistors (1206) 10 Chip Resistors (1206) 0.40 x 0.080 Microstrip 0.26 x 0.080 Microstrip 1.35 x 0.080 Microstrip 0.17 x 0.240 Microstrip 0.12 x 0.240 Microstrip 0.14 x 0.240 Microstrip 0.15 x 0.240 Microstrip 0.18 x 0.172 Microstrip 1.23 x 0.080 Microstrip 0.12 x 0.080 Microstrip 0.40 x 0.080 Microstrip 31 mil Glass Teflon
Figure 21. 450 - 520 MHz Broadband Test Circuit Schematic
MOTOROLA RF DEVICE DATA
MRF1570T1 MRF1570FT1 9
VGG C10 GND B1 C13 C12 C11 C2 C8 R1 C9 C4 C6 R3 R4 C7 C20 C22 L3 C21 C23 L4 C33 C30 C31 C32 C24 L1 C26 B3 B4 C29
VDD
GND
C1
C28 C25 C27 L2 C35 C36 C37 C38 B5 B6 C34 MRF1570T1
C3 C19 C18 C17 B2 C16
C14
R2
C5
C15
Figure 22. 450 - 520 MHz Broadband Test Circuit Component Layout
TYPICAL CHARACTERISTICS, 450 - 520 MHZ
100 Pout , OUTPUT POWER (WATTS) IRL, INPUT RETURN LOSS (dB) 80 60 40 20 VDD = 12.5 Vdc 0 0 1 2 3 4 5 6 7 8 -25 0 10 20 30 40 50 60 0 -5 -10 -15 -20
470 MHz 450 MHz 520 MHz 500 MHz
470 MHz 500 MHz 450 MHz 520 MHz VDD = 12.5 Vdc 70 80 90
Pin, INPUT POWER (WATTS)
Pout, OUTPUT POWER (WATTS)
Figure 23. Output Power versus Input Power
Figure 24. Input Return Loss versus Output Power
MRF1570T1 MRF1570FT1 10
MOTOROLA RF DEVICE DATA
TYPICAL CHARACTERISTICS, 450 - 520 MHZ
15 14 G ps , POWER GAIN (dB) 13 12 11 450 MHz , DRAIN EFFICIENCY (%) 470 MHz 500 MHz 520 MHz 70 60 50 470 MHz 40 30 VDD = 12.5 Vdc 90 20 10 20 30 40 50 60 70 80 90 500 MHz 520 MHz 450 MHz
10 9
VDD = 12.5 Vdc 0 10 20 30 40 50 60 70 80
Pout, OUTPUT POWER (WATTS)
Pout, OUTPUT POWER (WATTS)
Figure 25. Gain versus Output Power
Figure 26. Drain Efficiency versus Output Power
90
80
Pout , OUTPUT POWER (WATTS)
, DRAIN EFFICIENCY (%)
80
450 MHz 470 MHz
70 520 MHz 60 500 MHz 470 MHz 50 450 MHz VDD = 12.5 Vdc Pin = 38 dBm
70
500 MHz 520 MHz
60 VDD = 12.5 Vdc Pin = 38 dBm 800 1200 1600
50 400
40 400
800
1200
1600
IDQ, BIASING CURRENT (mA)
IDQ, BIASING CURRENT (mA)
Figure 27. Output Power versus Biasing Current
Figure 28. Drain Efficiency versus Biasing Current
100 Pout , OUTPUT POWER (WATTS) 90 , DRAIN EFFICIENCY (%) 80 70 60 50 40 30 10 450 MHz 470 MHz 500 MHz 520 MHz Pin = 38 dBm IDQ = 800 mA 11 12 13 14 15
80
70 520 MHz 60 500 MHz 470 MHz 450 MHz 50 Pin = 38 dBm IDQ = 800 mA 40 10 11 12 13 14 15
VDD, SUPPLY VOLTAGE (VOLTS)
VDD, SUPPLY VOLTAGE (VOLTS)
Figure 29. Output Power versus Supply Voltage
Figure 30. Drain Efficiency versus Supply Voltage
MOTOROLA RF DEVICE DATA
MRF1570T1 MRF1570FT1 11
ZOL* f = 135 MHz f = 175 MHz f = 135 MHz Zin
f = 175 MHz f = 400 MHz f = 470 MHz Zin f = 400 MHz ZOL* f = 470 MHz f = 520 MHz Zo = 5 ZOL* f = 450 MHz f = 520 MHz
Zo = 5
f = 450 MHz Zin
VDD = 12.5 V, IDQ = 0.8 A, Pout = 70 W f MHz 135 155 175 Zin 2.8 +j0.05 3.9 +j0.34 2.4 -j0.47 ZOL* 0.65 +j0.42 1.01 +j0.63 0.71 +j0.37
VDD = 12.5 V, IDQ = 0.8 A, Pout = 70 W f MHz 400 440 470 Zin 0.92 -j0.71 1.12 -j1.11 0.82 -j0.79 ZOL* 1.05 -j1.10 0.83 -j1.45 0.59 -j1.43
VDD = 12.5 V, IDQ = 0.8 A, Pout = 70 W f MHz 450 470 500 520 Zin 0.94 -j1.12 1.03 -j1.17 0.95 -j1.71 0.62 -j1.74 ZOL* 0.61 -j1.14 0.62 -j1.12 0.75 -j1.03 0.77 -j0.97
Zin
= Complex conjugate of source impedance.
ZOL* = Complex conjugate of the load impedance at given output power, voltage, frequency, and D > 50 %. Notes: Impedance Zin was measured with input terminated at 50 W. Impedance ZOL was measured with output terminated at 50 W.
Input Matching Network
Device Under Test
Output Matching Network
Z
in
Z
* OL
Figure 31. Series Equivalent Input and Output Impedance
MRF1570T1 MRF1570FT1 12
MOTOROLA RF DEVICE DATA
APPLICATIONS INFORMATION
DESIGN CONSIDERATIONS This device is a common-source, RF power, N-Channel enhancement mode, Lateral Metal-Oxide Semiconductor Field-Effect Transistor (MOSFET). Motorola Application Note AN211A, "FETs in Theory and Practice", is suggested reading for those not familiar with the construction and characteristics of FETs. This surface mount packaged device was designed primarily for VHF and UHF mobile power amplifier applications. Manufacturability is improved by utilizing the tape and reel capability for fully automated pick and placement of parts. However, care should be taken in the design process to insure proper heat sinking of the device. The major advantages of Lateral RF power MOSFETs include high gain, simple bias systems, relative immunity from thermal runaway, and the ability to withstand severely mismatched loads without suffering damage. MOSFET CAPACITANCES The physical structure of a MOSFET results in capacitors between all three terminals. The metal oxide gate structure determines the capacitors from gate-to-drain (Cgd), and gate-to-source (Cgs). The PN junction formed during fabrication of the RF MOSFET results in a junction capacitance from drain-to-source (Cds). These capacitances are characterized as input (Ciss), output (Coss) and reverse transfer (Crss) capacitances on data sheets. The relationships between the inter-terminal capacitances and those given on data sheets are shown below. The Ciss can be specified in two ways: 1. Drain shorted to source and positive voltage at the gate. 2. Positive voltage of the drain in respect to source and zero volts at the gate. In the latter case, the numbers are lower. However, neither method represents the actual operating conditions in RF applications. drain-source voltage under these conditions is termed VDS(on). For MOSFETs, VDS(on) has a positive temperature coefficient at high temperatures because it contributes to the power dissipation within the device. BVDSS values for this device are higher than normally required for typical applications. Measurement of BVDSS is not recommended and may result in possible damage to the device. GATE CHARACTERISTICS The gate of the RF MOSFET is a polysilicon material, and is electrically isolated from the source by a layer of oxide. The DC input resistance is very high - on the order of 109 -- resulting in a leakage current of a few nanoamperes. Gate control is achieved by applying a positive voltage to the gate greater than the gate-to-source threshold voltage, VGS(th). Gate Voltage Rating -- Never exceed the gate voltage rating. Exceeding the rated VGS can result in permanent damage to the oxide layer in the gate region. Gate Termination -- The gates of these devices are essentially capacitors. Circuits that leave the gate open-circuited or floating should be avoided. These conditions can result in turn-on of the devices due to voltage build-up on the input capacitor due to leakage currents or pickup. Gate Protection -- These devices do not have an internal monolithic zener diode from gate-to-source. If gate protection is required, an external zener diode is recommended. Using a resistor to keep the gate-to-source impedance low also helps dampen transients and serves another important function. Voltage transients on the drain can be coupled to the gate through the parasitic gate-drain capacitance. If the gate-to-source impedance and the rate of voltage change on the drain are both high, then the signal coupled to the gate may be large enough to exceed the gate-threshold voltage and turn the device on. DC BIAS Since this device is an enhancement mode FET, drain current flows only when the gate is at a higher potential than the source. RF power FETs operate optimally with a quiescent drain current (IDQ), whose value is application dependent. This device was characterized at IDQ = 800 mA, which is the suggested value of bias current for typical applications. For special applications such as linear amplification, IDQ may have to be selected to optimize the critical parameters. The gate is a dc open circuit and draws no current. Therefore, the gate bias circuit may generally be just a simple resistive divider network. Some special applications may require a more elaborate bias system. GAIN CONTROL Power output of this device may be controlled to some degree with a low power dc control signal applied to the gate, thus facilitating applications such as manual gain control, ALC/AGC and modulation systems. This characteristic is very dependent on frequency and load line.
Drain Cgd Gate Ciss = Cgd + Cgs Coss = Cgd + Cds Crss = Cgd
Cds Cgs Source
DRAIN CHARACTERISTICS One critical figure of merit for a FET is its static resistance in the full-on condition. This on-resistance, RDS(on), occurs in the linear region of the output characteristic and is specified at a specific gate-source voltage and drain current. The
MOTOROLA RF DEVICE DATA
MRF1570T1 MRF1570FT1 13
MOUNTING The specified maximum thermal resistance of 0.75C/W assumes a majority of the 0.170 x 0.608 source contact on the back side of the package is in good contact with an appropriate heat sink. As with all RF power devices, the goal of the thermal design should be to minimize the temperature at the back side of the package. Refer to Motorola Application Note AN4005/D, "Thermal Management and Mounting Method for the PLD-1.5 RF Power Surface Mount Package," and Engineering Bulletin EB209/D, "Mounting Method for RF Power Leadless Surface Mount Transistor" for additional information. AMPLIFIER DESIGN Impedance matching networks similar to those used with bipolar transistors are suitable for this device. For examples
see Motorola Application Note AN721, "Impedance Matching Networks Applied to RF Power Transistors." Large-signal impedances are provided, and will yield a good first pass approximation. Since RF power MOSFETs are triode devices, they are not unilateral. This coupled with the very high gain of this device yields a device capable of self oscillation. Stability may be achieved by techniques such as drain loading, input shunt resistive loading, or output to input feedback. The RF test fixture implements a parallel resistor and capacitor in series with the gate, and has a load line selected for a higher efficiency, lower gain, and more stable operating region. See Motorola Application Note AN215A, "RF Small-Signal Design Using Two-Port Parameters" for a discussion of two port network theory and stability.
MRF1570T1 MRF1570FT1 14
MOTOROLA RF DEVICE DATA
NOTES
MOTOROLA RF DEVICE DATA
MRF1570T1 MRF1570FT1 15
NOTES
MRF1570T1 MRF1570FT1 16
MOTOROLA RF DEVICE DATA
NOTES
MOTOROLA RF DEVICE DATA
MRF1570T1 MRF1570FT1 17
PACKAGE DIMENSIONS
2X
A
E1
B
E2
aaa
M
P DAB
DRAIN ID
5
1
8
4X
b2 aaa
6
M
2 (b1)
DB
2X
7
b3 D D2
D1
4X
7
4X
3
e
4X
e1 b1 aaa
M
6
8 DB
4
5
E
C
SEATING PLANE
A Y Y D
SEATING PLANE
NOTES: 1. CONTROLLING DIMENSION: INCH . 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DATUM PLANE -H- IS LOCATED AT TOP OF LEAD AND IS COINCIDENT WITH THE LEAD WHERE THE LEAD EXITS THE PLASTIC BODY AT THE TOP OF THE PARTING LINE. 4. DIMENSION D AND E1 DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.006 PER SIDE. DIMENSION D AND E1 DO INCLUDE MOLD MISMATCH AND ARE DETERMINED AT DATUM PLANE -H-. 5. DIMENSIONS b1 AND b2 DO NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.005 TOTAL IN EXCESS OF THE b1 AND b2 DIMENSIONS AT MAXIMUM MATERIAL CONDITION. 6. CROSSHATCHING REPRESENTS THE EXPOSED AREA OF THE HEAT SLUG. DIM A A1 A2 D D1 D2 E E1 E2 L P b1 b2 b3 c1 e e1 q aaa bbb INCHES MIN MAX 0.098 0.110 0.000 0.004 0.098 0.106 0.926 0.934 0.810 BSC 0.608 BSC 0.296 0.304 0.246 0.254 0.170 BSC 0.060 0.070 0.126 0.134 0.088 0.094 0.066 0.072 0.067 0.073 0.007 0.011 0.104 BSC 0.210 BSC 0_ 6_ 0.004 0.008 MILLIMETERS MIN MAX 2.49 2.79 0.00 0.10 2.49 2.69 23.52 23.72 20.57 BSC 15.44 BSC 7.52 7.72 6.25 6.45 4.32 BSC 1.52 1.78 3.20 3.40 2.24 2.39 1.68 1.83 1.70 1.85 0.178 0.279 2.64 BSC 5.33 BSC 0_ 6_ 0.10 0.20
L q
A1
STYLE 1: PIN 1. 2. 3. 4. 5. 6. 7. 8. SOURCE (COMMON) DRAIN DRAIN SOURCE (COMMON) SOURCE (COMMON) GATE GATE SOURCE (COMMON)
A2
DATUM PLANE
H c1
CASE 1366-03 ISSUE B TO-272 SPLIT LEAD PLASTIC MRF1570T1
MRF1570T1 MRF1570FT1 18
CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC
VIEW Y-Y
NOTE 6
4
3
bbb C A B 2
1
MOTOROLA RF DEVICE DATA
2X
A
E1 B E2
aaa
M
P DAB
aaa
3X
M
DB
DRAIN ID
b
5
3X
1
2X
8
e2
4X
D1
b2 aaa M D B
6
2
(b1) 7 D D2
b3
4X
e
4X
7
4X
3
e1
6
aaa
M
b1 DB
8
4 b4
5
bbb C A B
4X
E
c1 A D
SEATING PLANE
F Y
ZONE "J"
A1 Y 6 A2
STYLE 1: PIN 1. 2. 3. 4. 5. 6. 7. 8.
SOURCE (COMMON) DRAIN DRAIN SOURCE (COMMON) SOURCE (COMMON) GATE GATE SOURCE (COMMON)
NOTES: 1. CONTROLLING DIMENSION: INCH. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DIMENSIONS "D" AND "E1" DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.006 PER SIDE. DIMENSIONS "D" AND "E1" DO INCLUDE MOLD MISMATCH AND ARE DETERMINED AT DATUM PLANE -H-. 4. DIMENSIONS "b" AND "b1" DO NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.005 TOTAL IN EXCESS OF THE "b1" AND "b2" DIMENSIONS AT MAXIMUM MATERIAL CONDITION. 5. CROSSHATCHING REPRESENTS THE EXPOSED AREA OF THE HEAT SLUG. 6. DIMENSION A2 APPLIES WITHIN ZONE "J" ONLY.
DIM A A1 A2 D D1 D2 E E1 E2 F P b b1 b2 b3 b4 c1 e e1 e2 aaa bbb
INCHES MIN MAX 0.098 0.106 0.038 0.044 0.040 0.042 0.926 0.934 0.810 BSC 0.608 BSC 0.492 0.500 0.246 0.254 0.170 BSC 0.025 BSC 0.126 0.134 0.105 0.111 0.088 0.094 0.066 0.072 0.067 0.073 0.077 0.083 0.007 0.011 0.104 BSC 0.210 BSC 0.229 BSC 0.004 0.008
CASE 1366A-02 ISSUE A TO-272 STRAIGHT LEAD PLASTIC MRF1570FT1
MOTOROLA RF DEVICE DATA
CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC CCCC
VIEW Y-Y
MILLIMETERS MIN MAX 2.49 2.69 0.96 1.12 1.02 1.07 23.52 23.72 20.57 BSC 15.44 BSC 12.50 12.70 6.25 6.45 4.32 BSC 0.64 BSC 3.20 3.40 2.67 2.82 2.24 2.39 1.68 1.83 1.70 1.85 1.96 2.11 0.178 0.279 2.64 BSC 5.33 BSC 5.82 BSC 0.10 0.20
NOTE 5
4
3
2
1
MRF1570T1 MRF1570FT1 19
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and the Stylized M Logo are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Motorola and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. E Motorola, Inc. 2002. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 JAPAN: Motorola Japan Ltd.; SPS, Technical Information Center, 3-20-1, Minami-Azabu. Minato-ku, Tokyo 106-8573 Japan. 81-3-3440-3569 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T. Hong Kong. 852-26668334 Technical Information Center: 1-800-521-6274 HOME PAGE: http://www.motorola.com/semiconductors
MRF1570T1 MRF1570FT1 20
MOTOROLA RF DEVICE DATA
MRF1570T1/D

▲Up To Search▲

Price & Availability of MRF1570FT1

	To Download MRF1570FT1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .