|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MKP 1839 Vishay Roederstein Metallized Polypropylene Film Capacitor Related Document: IEC 60384-16 MAIN APPLICATIONS: Pulse operations, deflection circuits in TV sets (S-correction), SMPS and thyristor circuits, storage, filter, timing and sample and hold circuits. Dimensions in millimeters Od L Max. D Max. MARKING: Manufacturer's logo/type/C-value/rated voltage/tolerance/ date of manufacture 40.0 5.0 40.0 5.0 DIELECTRIC: Polypropylene film ELECTRODES: Vacuum deposited aluminum d 0.6 0.8 1.0 D 9.0 < 16.5 16.5 L 19.0 >26.5 26.5 COATING: Plastic-wrapped, epoxy resin sealed TIME CONSTANT: Measured at 100 VDC for one minute CONSTRUCTION: Extended metallized film (refer to general information) For C > 0.33F: 30,000 s minimum value LEADS: Tinned wire TEMPERATURE COEFFICIENT: - 250 x 10-6/C (typical value) IEC TEST CLASSIFICATION: 55/100/56, according to IEC 60068 CAPACITANCE DRIFT: Up to + 40C, < 0.5% for a period of two years OPERATING TEMPERATURE RANGE: - 55C to + 100C DERATING FOR DC AND AC.CATEGORY VOLTAGE UC: At + 85C: UC = 1.0 UR At + 100C: UC = 0.7 UR CAPACITANCE RANGE: 1000pF to 10F CAPACITANCE TOLERANCES: 10% (K), 5% (J), 2.5% (H), 1% (F) 1% only up to maximum body diameter of 14.5 x 31.5mm SELF INDUCTANCE: ~ 12 nH measured with 6mm long leads PULL TEST ON LEADS: 20 N in direction of leads according to IEC 60068-2-21 RATED VOLTAGES (UR): 160 VDC, 250 VDC, 400 VDC, 630 VDC BEND TEST ON LEADS: 2 bends through 90 with half of the force used in pull test PERMISSIBLE AC VOLTAGES (RMS) UP TO 60Hz: 100 VAC, 160 VAC, 220 VAC, 250 VAC DIELECTRIC ABSORPTION: 0.05% (typical value) according to IEC 60384-1 TEST VOLTAGE (ELECTRODE/ELECTRODE): 1.6 x UR for 2 s RELIABILITY: Operational life > 300,000 h Failure rate < 5 FIT (40C and 0.5 x UR) For further details, please refer to the general information provided in this catalog. INSULATION RESISTANCE: Measured at 100 VDC after one minute For C 0.33F: 100,000 M minimum value MAXIMUM PULSE RISE TIME CAPACITOR LENGTH (mm) 11 14 19 26.5 31.5 41.5 Maximum pulse rise time dv/dt [V/s] 160 VDC 240 175 100 60 45 30 250 VDC 300 220 125 75 60 40 400 VDC 515 380 200 120 95 65 630 VDC 700 510 280 160 120 85 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. www.vishay.com 68 For technical questions, contact dc-film@vishay.com Document Number 26022 Revision 01-Dec-03 MKP 1839 Metallized Polypropylene, Related Document: IEC 60384-16 DISSIPATION FACTOR TAN MEASURED AT 1kHz 10kHz 100kHz C 0.1F 0.4 x 10-3 0.6 x 10-3 4 x 10-3 0.1F < C 1.0F 0.4 x 10-3 0.6 x 10-3 -- Maximum values C > 1.0F 1 x 10-3 -- -- Vishay Roederstein CAPACITANCE CAPACITANCE CODE VOLTAGE CODE 16 160 VDC/ 100 VAC D L -- -- -- -- -- -- -- -- -- 11.0 11.0 11.0 14.0 14.0 19.0 19.0 19.0 26.5 26.5 26.5 31.5 31.5 41.5 41.5 41.5 VOLTAGE CODE 25 250 VDC/ 160 VAC D -- -- -- -- -- -- 5.0 5.0 5.0 5.5 6.0 6.5 7.5 7.0 8.5 8.0 9.0 11.0 12.5 13.0 16.0 19.0 19.5 23.0 -- L -- -- -- -- -- -- 11.0 11.0 11.0 11.0 14.0 14.0 14.0 19.0 19.0 26.5 26.5 26.5 26.5 31.5 31.5 31.5 41.5 41.5 -- D VOLTAGE CODE 40 400 VDC/ 220 VAC* L -- -- -- -- -- 11.0 11.0 11.0 14.0 14.0 14.0 19.0 19.0 26.5 26.5 26.5 26.5 31.5 31.5 31.5 41.5 -- -- -- -- D VOLTAGE CODE 63 630 VDC/ 250 VAC* L 11.0 11.0 11.0 11.0 11.0 11.0 14.0 14.0 14.0 19.0 19.0 19.0 26.5 26.5 26.5 26.5 31.5 31.5 41.5 41.5 -- -- -- -- -- 1000 1500 2200 3300 4700 6800 0.01 0.015 0.022 0.033 0.047 0.068 0.1 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 pF pF pF pF pF pF F F F F F F F F F F F F F F F F F F F - 210 - 215 - 222 - 233 - 247 - 268 - 310 - 315 - 322 - 333 - 347 - 368 - 410 - 415 - 422 - 433 - 447 - 468 - 510 - 515 - 522 - 533 - 547 - 568 - 610 -- -- -- -- -- -- -- -- -- 5.0 5.5 6.0 6.5 7.5 7.0 8.0 9.0 8.5 10.5 12.0 13.0 15.5 15.5 18.5 22.0 -- -- -- -- -- 5.0 5.5 6.0 6.5 7.0 8.0 8.5 9.0 8.0 9.5 11.5 13.5 14.0 17.0 20.5 21.0 -- -- -- -- 5.0 5.0 5.0 5.0 5.0 5.5 5.5 6.5 7.5 7.0 8.0 9.0 8.5 10.5 12.0 14.5 15.0 18.0 18.0 22.0 -- -- -- -- -- Further C-values upon request PCM = L + 3.5mm *Not suitable for mains applications. Please refer to X-capacitors in our catalog "RFI Suppression Components". RECOMMENDED PACKAGING LETTER CODE G R -- TYPE OF PACKAGING AMMO REEL BULK for L > 31.5mm REEL DIAMETER (mm) -- 350 -- ORDERING CODE EXAMPLE MKP 1839-422-403-G MKP 1839-422-403-R MKP 1839-522-403 X X X Document Number 26022 Revision 01-Dec-03 For technical questions, contact dc-film@vishay.com www.vishay.com 69 MKP 1839 Vishay Roederstein Metallized Polypropylene, Related Document: IEC 60384-16 100 7 5 3 2 10 7 5 3 2 160 VDC 1 103 2 3 5 7 104 2 3 5 7 105 2 3 5 7 106 f [Hz] 10 103 2 3 5 7 104 2 3 5 7 105 2 3 5 7 106 f [Hz] 10 6. V RMS V RMS 0. 04 7 Capacitance in F 0. 1 22 0. 47 1000 7 5 3 2 0. Capacitance in F 0. 8 4. 7 2. 2 1. 0 100 7 5 3 2 250 VDC 01 0. 6. 8 4. 02 2 0. 22 7 2. 2 1. 0 0. 04 7 47 0. 0. 1 Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency V RMS V RMS 1000 7 5 3 2 100 7 5 3 2 400 VDC 10 103 2 3 5 7 104 2 3 5 0. 01 0. 2. 1. 02 Capacitance in F 1000 7 5 3 2 Capacitance in pF and F 1. 5 10 00 1. 0 0. 47 22 00 0. 22 0. 1 0. 04 7 2 0. 04 7 0. 1 2 0 0. 100 7 5 3 2 630 VDC 10 47 0. 22 0. 47 00 02 2 0. 01 7 105 2 3 5 7 106 f [Hz] 103 2 3 5 7 104 2 3 5 7 105 2 3 5 7 106 f [Hz] Permissible AC Voltage versus Frequency Permissible AC Voltage versus Frequency www.vishay.com 70 For technical questions, contact dc-film@vishay.com Document Number 26022 Revision 01-Dec-03 |
Price & Availability of MKP1839 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |