|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MC10ELT25, MC100ELT25 Differential ECL to TTL Translator The MC10ELT/100ELT25 is a differential ECL to TTL translator. Because ECL levels are used a +5V, -5.2V (or -4.5V) and ground are required. The small outline 8-lead SOIC package and the single gate of the ELT25 makes it ideal for those applications where space, performance and low power are at a premium. Because the mature MOSAIC 1.5 process is used, low cost can be added to the list of features. The VBB output allows the ELT25 to also be used in a single-ended input mode. In this mode the VBB output is tied to the IN input for a non-inverting buffer or the IN input for an inverting buffer. If used the VBB pin should be bypassed to ground via a 0.01F capacitor. The ELT25 is available in both ECL standards: the 10ELT is compatible with MECL 10H logic levels while the 100ELT is compatible with ECL 100K logic levels. For further information regarding modeling, refer to AN1596/D "ECLinPS Lite Translator ELT Family SPICE I/O Model Kit". * 2.6ns Typical Propagation Delay * Internal Input Resistors: Pulldown on D, Pulldown and Pullup on D * Q Output will default LOW with inputs open or at VEE * Differential ECL Inputs * Small Outline SOIC Package * 24mA TTL Outputs * Flow Through Pinouts * Moisture Sensitivity Level 1, Indefinite Time Out of Drypack. For Additional Information, See Application Note AND8003/D * Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 * Transistor Count: 135 devices LOGIC DIAGRAM AND PINOUT ASSIGNMENT http://onsemi.com 8 1 SO-8 D SUFFIX CASE 751 MARKING DIAGRAM 8 HLT25 ALYW 1 H = MC10 K = MC100 A = Assembly Location 1 L = Wafer Lot Y = Year W = Work Week 8 KLT25 ALYW *For additional information, see Application Note AND8002/D PIN DESCRIPTION PIN D Q VCC VEE VBB GND FUNCTION Diff ECL Inputs TTL Output Positive Supply Negative Supply Reference Output Ground VEE 1 TTL ECL D0 3 8 VCC D0 2 7 Q0 ORDERING INFORMATION Device Package SO-8 SO-8 SO-8 SO-8 Shipping 98 Units / Rail 2500 Units / Reel 98 Units / Rail 2500 Units / Reel 6 NC MC10ELT25D MC10ELT25DR2 VBB 4 5 GND MC100ELT25D MC100ELT25DR2 (c) Semiconductor Components Industries, LLC, 1999 1 February, 2000 - Rev. 3 Publication Order Number: MC10ELT25/D MC10ELT25, MC100ELT25 MAXIMUM RATINGS* Symbol VCC VEE VIN IOUT TA TSTG JA JC Tsol Parameter DC Supply Voltage (Referenced to GND, VEE = -5.2) DC Supply Voltage (Referenced to GND, VCC = 5.0) Input Voltage Current Applied to Output in Low Output State Operating Temperature Range (In Free-Air) Storage Temperature Range Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Solder Temperature (<2 to 3 Seconds: 245C desired) Still Air 500lfpm Continuous Surge Value 7.0 -8.0 0 to VCC 50 100 -40 to 85 -55 to +150 190 130 41 to 44 5% 265 Unit V V V mA C C C/W C/W C * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. TTL OUTPUT DC CHARACTERISTICS (VCC = 4.5V to 5.5V; VEE = -4.2V to -5.5V 100ELT, -4.94V to -5.5V 10ELT; TA = -40C to 85C) Symbol VOH VOL ICCH ICCL IEE IOS Characteristic Output HIGH Voltage Output LOW Voltage Power Supply Current Power Supply Current Power Supply Current Output Short Circuit Current -150 11 13 15 Min 2.4 0.5 16 18 21 -60 Typ Max Unit V V mA mA mA mA Condition IOH = -3.0mA IOL = 24mA ECL INPUT DC CHARACTERISTICS (VCC = 4.5V to 5.5V; VEE = -4.2V to -5.5V 100ELT, -4.94V to -5.5V 10ELT; TA = -40C to 85C) -40C Symbol IIH 0C Min Max 150 25C Min Typ Max 150 85C Min Max 150 Characteristic Input HIGH Current Min Max 150 Unit A IIL VCMR VPP VIH VIL VBB Input LOW Current Common Mode Range Minimum Peak-to-Peak Input1 Input HIGH Voltage Input LOW Voltage Reference Output 10ELT 100ELT 10ELT 100ELT 10ELT 100ELT 0.5 VEE + 2.2 200 -1230 -1165 -1950 -1810 -1.43 -1.38 -890 -880 -1500 -1475 -1.30 -1.26 VCC 0.5 VEE + 2.2 200 -1170 -1165 -1950 -1810 -1.38 -1.38 -840 -880 -1480 -1475 -1.27 -1.26 VCC 0.5 VEE + 2.2 200 -1130 -1165 -1950 -1810 -1.35 -1.38 -810 -880 -1480 -1475 -1.25 -1.26 VCC 0.5 VEE + 2.2 200 -1060 -1165 -1950 -1810 -1.31 -1.38 -720 -880 -1445 -1475 -1.19 -1.26 VCC A V mV mV mV V 1. 200mV input guarantees full logic swing at the output. AC CHARACTERISTICS (VCC = 4.5V to 5.5V; VEE = -4.2V to -5.5V 100ELT, -4.94V to -5.5V 10ELT; TA = -40C to 85C) -40C Symbol tPLH tPHL Characteristic Propagation Delay Propagation Delay Min 1.7 2.6 Max 3.6 4.1 Min 1.7 2.6 0C Max 3.6 4.1 Min 1.7 2.6 25C Typ Max 3.6 4.1 85C Min 1.7 2.6 Max 3.6 4.1 Unit ns ns Condition CL = 20pF CL = 20pF http://onsemi.com 2 MC10ELT25, MC100ELT25 PACKAGE DIMENSIONS SO-8 D SUFFIX CASE 751-05 ISSUE P -A- B M 8 5 X 45 _ J 1 4 4X -B- M_ G F NOTES: 1. DIMENSIONS A AND B ARE DATUMS AND T IS A DATUM SURFACE. 2. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 3. DIMENSIONS ARE IN MILLIMETER. 4. DIMENSION A AND B DO NOT INCLUDE MOLD PROTRUSION. 5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 6. DIMENSION D DOES NOT INCLUDE MOLD PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A B C D F G J K M P R MILLIMETERS MIN MAX 4.80 5.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.18 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 P 0.25 (0.010) M -T- 8X C SEATING PLANE D 0.25 (0.010) M K TB S A S R http://onsemi.com 3 MC10ELT25, MC100ELT25 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 1:00pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 1:00pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 12:00pm to 5:00pm UK Time) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, England, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5740-2745 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 4 MC10ELT25/D |
Price & Availability of MC100ELT25DR2 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |