NTE3000 Light Emitting Diode Miniature, Clear Red
Description: The NTE3000 is a red diffused Gallium Arsenide phosphide diode in a two lead epoxy package with a clear lens. The NTE3000 is intended for high volume indicator light applications. Major usage is in applications such as diagnostic lights on printed circuit boards and panel lights. It can also be used to displace subminiature lamps as small as T3/4 size. Absolute Maximum Ratings: Power Dissipation (TA = +25C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mW Derate linearly from 25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6mW/C Forward Current Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40mA Peak (1 sec pulse width, 0.3% duty cycle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0A Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0V Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 to +100C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55 to +100C Lead Temperature (During Soldering, 5sec max, Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +230C Note 1. The leads of the device were immersed in molten solder at +230C to a point 1/16 (1.6mm) inch from the body of the device per MIL S-750, with a dwell time of 5 seconds. Typical Thermal Characteristics: Wavelength Temperature Coefficient (Case Temperature) . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3nm/C Forward Voltage Temperature Coefficient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -2.0mV/C Electro-Optical Characteristics: (TA = +25C unless otherwise specified)
Parameter Luminous Intensity Peak Emission Wavelength Spectral Line Halfwidth Forward Voltage Capacitance Rise & Fall Time Reverse Current Reverse Breakdown Voltage View Angle Test Conditions IF = 20mA, Note 2 IF = 20mA IF = 20mA IF = 20mA V=0 50 System IF = 20mA VR = 3.0V IR = 100A Between 50% points Min 0.5 - - - - - - 5 - Typ 1.4 660 20 1.65 80 50 5.0 15 80 Max - - - 2.0 - - - - - Unit mcd nm nm V pF ns nA V degrees
Note 2. As measured with a Photo Research Corp. "SPECTRA" Microcandela Meter (Model IV-D).
.250 (6.35) Min
.100 (2.54) .020 (.508)
.025 (0.65) Green Mark Indicates Cathode (-)
.085 (2.18) .038 (0.98) R .055 (1.4) .015 (0.39) .010 (.254)
15
.095 (2.42)
|
