|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A V7PD-15C Series * * * * * * * * * * Nonisolated Industry standard pinout Fixed frequency High efficiency means less power dissipation Optimized for cost Remote on/off Undervoltage lockout (UVLO) Over current and short circuit protection Remote sense Over temperature shutdown protection POWER PRODUCTS BP02V7PD-15C Description The Bel V7PD-15C modules are a series of non-isolated, step down DC/DC power converters that operate from a nominal 3.3V source. These converters are available in a range of output voltages from 1.2V to 2.5V. They are packaged in an industry standard, single-in-line footprint and provide a maximum 15A output. Standard features include remote on/off, over current and short circuit protection, output voltage adjust and remote sense. These products may be used almost anywhere low voltage silicon is employed and a 3.3V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications * * * * Distributed power architectures Data networking equipment Telecommunications Computers and peripherals Options * Reverse remote on/off logic Part Number Selection Output Voltage 2.5V 1.8V 1.5V 1.2V Input Voltage 3.3V 3.3V 3.3V 3.3V Max. Output Current 15A 15A 15A 15A Max. Output Power 37.5W 27.0W 22.5W 18.0W Typical Efficiency 92% 87% 85% 81% Part Number Active Low V7PD-15C250 V7PD-15C180 V7PD-15C150 V7PD-15C120 Part Number Active High V7PD-15C25H V7PD-15C18H V7PD-15C15H V7PD-15C12H (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 1 POWER PRODUCTS BP02V7PD-15C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Absolute Maximum Ratings Parameter Continuous Input Voltage Output Enable Terminal Voltage Ambient Temperature Storage Temperature Symbol Vin Vouten Tamb Tstor Min -0.3 -0.3 -40 -55 Typical Max 7 7 85 125 Unit V V C C Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Operating Input Voltage Input Current 2.5V 1.8V 1.5V 1.2V No Load Input Current Remote Off Input Current Input Reflected Ripple Current1 Input Reflected Ripple Current (P-P)1 I2t Inrush Current Transient Turn On Voltage Threshold Turn Off Voltage Threshold All All All All All All 15 25 60 0.05 2.85 2.5 Module All Symbol Vin Iin 15 12 11 10 150 30 60 100 0.1 mA mA mArms mApk A2s V V Min 3 Typical 3. 3 Max 3.6 Units V A Note: Input capacitance two 470F/6.3V with ESR = 0.03 max at 100kHz @ 25 C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Output Specifications Parameter Output Voltage Set Point 1 2.5V 1.8V 1.5V 1.2V Load Regulation 2.5V 1.8V 1.5V 1.2V Line Regulation 2.5V 1.8V 1.5V 1.2V Regulation Over Temperature 2.5V 1.8V 1.5V 1.2V Total Output Voltage Regulation 2.5V 1.8V 1.5V 1.2V Output Ripple and Noise 2 Output Ripple and Noise 2 Output Current Range Output DC Current Limit Shor t Circuit Surge 2.5V 1.8V 1.5V 1.2V Turn on Time Overshoot at Turn On Output Capacitance All All All Cout 0 Ton All All All All Iout Ioutlim Ioutsurge 0.15 0.2 0.3 0.4 7 0.2 0.4 0.5 0.7 20 3 5600 0 18 70 14 50 35.4 32 29.6 100 35 15 37 12 10 10 10 30 20 20 20 5 4 4 3 7.5 5.4 4.5 3.6 7.5 5 4.5 3.6 12.5 10 7.5 6.0 Module Symbol Vout 2.450 1.764 1.470 1.176 2.500 1.800 1.500 1.200 2.550 1.836 1.530 1.224 Min Typical Max POWER PRODUCTS BP02V7PD-15C Units V mV mV mV mV mVp-p mVrms A A A 2s ms % F Note: All specifications are typical at nominal input, full load at 25 C unless otherwise stated. 1. Vin = 3.3V, Iout = full load, Ta = 25 C. 2. 0 - 20MHz, 1F ceramic cap on output. (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 3 POWER PRODUCTS BP02V7PD-15C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Output Specifications Parameter Transient Response 3 Module Symbol Min Typical Max Units V 50% to 100% of Max Load Settling Time 2.5V V 100% to 50% of Max Load Settling Time Transient Response 3 100 Ts 35 100 Ts 35 150 50 150 50 mV s mV s V 50% to 100% of Max Load Settling Time 1.8V V 100% to 50% of Max Load Settling Time Transient Response 3 100 Ts 35 100 Ts 35 150 50 150 50 mV s mV s V 50% to 100% of Max Load Settling Time 1.5V V 100% to 50% of Max Load Settling Time Transient Response 3 100 Ts 35 100 Ts 35 150 50 150 50 mV s mV s V 50% to 100% of Max Load Settling Time 1.2V V 100% to 50% of Max Load Settling Time Ts Ts 100 35 100 35 150 50 150 50 mV s mV s Note: All specifications are typical at nominal input, full load at 25 C unless otherwise stated. 3. di/dt = 0.5A/1S, Ta = 25 C with a 470F aluminum cap on the output. (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A POWER PRODUCTS BP02V7PD-15C General Specifications Parameter Efficiency1 2.5V 1.8V 1.5V 1.2V Switching Frequency Over Temperature Shutdown Output Voltage Trim Range2 2.5V 1.8V 1.5V 1.2V Remote Sense Compensation 2.5V 1.8V 1.5V 1.2V Weight All 13.9 5 10 10 10 g 90 90 90 90 105 110 110 110 % All All Fsw Tc Module Symbol 88 83 81 77 250 92 87 85 81 300 120 340 kHz C % Min Typical Max Units % 1. Vin=3.3V, full load and Ta=25 C. 2. See graphs on pages 11-13. Control Specifications Parameter Remote On/Off 3 Module Symbol Vouten Min Typical Max Units V Signal Low (Unit On) V7PD-15Cxx0 Signal High (Unit Off) Signal Low (Unit Off) V7PD-15CxxH Signal High (Unit On) -0.3 2.8 -0.3 2.8 1 7 0.8 7 V V V V 3. With remote on/off pin 11 open, the module is on. (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 5 POWER PRODUCTS BP02V7PD-15C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Efficiency Data 2.5V Module 99% 97% Efficiency 95% 93% 91% 89% 87% 85% 0 5 10 15 Output Current 3.0V 3.3V 3.6V Efficiency 94% 92% 90% 88% 86% 84% 82% 80% 0 5 1.8V M odule 3.0V 3.3V 3.6V 10 15 Output Current 1.5V M odule 1.2V M odule 94% 92% 92% 90% 88% Efficiency 3.0V 3.3V 3.6V Efficiency 90% 88% 86% 84% 82% 0 5 10 15 O utput Current 86% 84% 82% 80% 78% 0 5 10 15 O utput Current 3.0V 3.3V 3.6V (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 6 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Ripple and Noise 1F ceramic cap added at the output. POWER PRODUCTS BP02V7PD-15C Ripple and noise at full load and 3.3Vdc input, 2.5Vdc output and Ta=25 C Ripple and noise at full load and 3.3Vdc input, 1.8Vdc output and Ta=25 C Ripple and noise at full load and 3.3Vdc input, 1.5Vdc output and Ta=25 C Ripple and noise at full load and 3.3Vdc input, 1.2Vdc output and Ta=25 C (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 7 POWER PRODUCTS BP02V7PD-15C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Transient Response Transient response: di/dt = 0.5A/S, with a 470F aluminum cap on the output Vout=2.5V 50% to 100% load transients at 3.3V input and Ta=25 C Vout=2.5V 100% to 50% load transients at 3.3V input and Ta=25 C Vout=1.8V 50% to 100% load transients at 3.3V input and Ta=25 C Vout=1.8V 100% to 50% load transients at 3.3V input and Ta=25 C (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 8 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Transient Response Transient response: di/dt = 0.5A/S, with a 470F aluminum cap on the output POWER PRODUCTS BP02V7PD-15C Vout=1.5V 50% to 100% load transients at 3.3V input and Ta=25 C Vout=1.5V 100% to 50% load transients at 3.3V input and Ta=25 C Vout=1.2V 50% to 100% load transients at 3.3V input and Ta=25 C Vout=1.2V 100% to 50% load transients at 3.3V input and Ta=25 C (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 9 POWER PRODUCTS BP02V7PD-15C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Thermal Considerations V7PD-15C Derating Curve 15 12 100LFM 200LFM 300LFM Output Current (A) 9 6 3 0 0 10 45 55 65 75 85 Natural Convection Ambient Temperature, Ta (C) Output Current vs. Local Ambient Temperature and Air Velocity (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 10 POWER PRODUCTS BP02V7PD-15C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Output Voltage Set-Point Adjustment Trim Down Test Circuit Vo Trim Up Test Circuit Vo Trim Trim Gnd Gnd Output Voltage Set-Point Adjustment V7PD-15C25xTrim Resistor Calculation Rtrim down = ( 9.631 - 10.740) Kohm Vo - Vo, adj Rtrim up = ( 4.504 - 5.110) Kohm Vo, adj - Vo (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 11 POWER PRODUCTS BP02V7PD-15C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Output Voltage Set-Point Adjustment V7PD-15C18x Trim Resistor Calculation Rtrim down = ( 3.869 - 9.460) Kohm Vo - Vo, adj Rtrim up = ( 3.072 - 5.620) Kohm Vo, adj - Vo V7PD-15C15x Trim Resistor Calculation Rtrim down = ( 1.765 - 8.120) Kohm Vo - Vo, adj Rtrim up = ( 2.000 - 5.620) Kohm Vo, adj - Vo (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 12 POWER PRODUCTS BP02V7PD-15C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Output Voltage Set-Point Adjustment V7PD-15C12x Trim Resistor Calculation Rtrim down = ( 1.562 - 6.580) Kohm Vo - Vo, adj Rtrim up = ( 3.072 - 2.740) Kohm Vo, adj - Vo (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 * Tel 201-432-0463 * Fax 201-432-9542 * www.belfuse.com page 13 POWER PRODUCTS BP02V7PD-15C NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 1.2V - 2.5V Output / 15A Mechanical V7PD-15C 3.00 [76.20] 0.05 [1.27] 0.55 [13.97] 0.39 [9.91] max 0.063 [1.60] 0.025 [0.64] 0.10 [2.54] 0.65 [16.51] 0.10 [2.54] 1.4 [35.56] 0.15 [3.81] 0.09 [2.30] max 1 2 34 5 6 7 8 91011 Pin 1 2 3 Function +Vo +Vo Remote Sense +Vo Ground Ground +Vin +Vin Not Used Trim Remote On/Off Dimensions are in inches [millimeters]. Standard dimension tolerance is 0.005 [0.13] unless otherwise noted. 4 5 6 7 8 9 10 11 (c)2003 Bel Fuse Inc. Specifications subject to change without notice. 02.03 CORPORATE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 14 |
Price & Availability of V7PD-15C |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |